WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Ford F-550

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

125 on file from NHTSA, as of 2026-10-19.

About P04E3 on the 2016 Ford F-550: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

By topic

Only bulletins with trouble code: P04E3 are shown. Show all

Bulletins, newest first
SSM 504492022-02-04. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING. Some 2016 F-Super Duty vehicles equipped with a 6.7L engine may have diagnostic trouble code (DTC) P04E3 stored in the powertrain control module (PCM) after reprogramming the PCM software for various reasons. Vehicles built on or after 11-Nov-2015 are not equipped with a crankcase ventilation sensor (CRNKCSVT). This DTC may be caused by incorrect PCM programming. To correct the condition, start a new vehicle session and run the PCM Programmable Module Installation (PMI). The IDS scan tool will ask to verify the style of the connector on the crankcase vent (CCV) hose. Answering this prompt incorrectly will cause DTC P04E3 to be stored in the PCM. A new Technical Support Video has been added to PTS at: http://site-307934.bcvp0rtal.com/detail/videos/303---engine/video/6294017439001/p04e3-after-pcm-reprogramming-on-14-16-my-6.7l-super-duties.
SSM 497252021-05-03. Service bulletin. POWER TRAIN. Some 2016 F-Super Duty trucks equipped with a 6.7L engine may have diagnostic trouble code (DTC) P04E3 stored in the powertrain control module (PCM) after reprogramming the PCM software for various reasons. Vehicles built on or after 11-Nov-2015 are not equipped with a crankcase ventilation sensor (CRNKCSVT). This DTC may be caused by incorrect PCM programming. To correct the condition, start a new vehicle session using a computer with IDS that has not been previously connected to the vehicle. On the vehicle specification screen, answer NO when asked if the vehicle is correct. Enter the PCM tear tag and perform PCM software reprogramming. The IDS scan tool will ask to verify the style of the connector on the crankcase vent (CCV) hose. Answering this prompt incorrectly will cause DTC P04E3 to be stored in the PCM.
TSB 18-23012018-11-19. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV). Some 2014-2016 F-Super Duty vehicles built on or before 11-Nov-2015 equipped with a 6.7L engine may exhibit an illuminated MIL with DTCs P04DB, P04E2 and/or P04E3 stored in the powertrain control module (PCM). Follow the Service Procedure steps to correct the condition.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.