P02D4 on the 2016 Ford F-250
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
Nobody has written a description of this code yet.
| SSM 46057 | 2017-08-01. Service bulletin. Some 2016 F-Super Duty vehicles equipped with a 6.7L and dual generators built on 26-Oct-2015 and through 9-Dec-2015 may exhibit an illuminated malfunction indicator lamp (MIL) with no drivability symptoms and diagnostic trouble codes (DTCs) P02CC, P02CE, P02D0, P02D2, P02D4, P02D6, P02D8 and/or P02DA. This may be caused by a thickness variation in the accessory drive belt due to a cord shift during manufacturing that resulted in excessive tensioner movement at hot idle with no accessory drive belt loads present. To repair, replace the accessory drive belt per workshop manual (WSM) section 303-05 then reset minimum fuel mass adaptation and crankshaft position sensor learned values. Use applicable labor operations in section 6 and 10 of the SLTS manual and causal part 8620. |
|---|---|
| 16-0049 | 2016-06-22. Service bulletin. 6.7L DIESEL - FUEL KNOCK AT IDLE WITH MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATED WITH MULTIPLE DIAGNOSTIC TROUBLE CODES (DTCS) ISSUE Some 2011-2016 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a fuel knock type noise at idle, illuminated MIL with one or more of the following DTCs: P0263, P0266, P0269, P0272, P0275, P0278, P0281, P0284, P02DA, P02D0, P02D1, P02D2, P02D3, P02D4, P02D5, P02D6, P02D7, P02D8, P02D9, P02CC, P02CD, P02CE and/or P02CF stored in powertrain control module (PCM) memory. |
2 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.