Service bulletins for the 2020 Ford F-150
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
247 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Suspension are shown. Show all
| SSM 48658 | 2020-04-02. Service bulletin. SUSPENSION. SSM 48658 - 2019-2020 F-150 Raptor - Shock Absorber Solenoid Serviceable Separately From Shock Absorber 2019-2020 F-150 Raptor vehicles that require service of the shock absorber solenoid or wiring can be repaired with replacement of the solenoid separately from the shock absorber. The solenoid can be serviced without removing the shock from the vehicle. Refer to step 1 of the shock absorber installation procedure in the Workshop Manual (WSM), Section 204-01 and 204-02 for detailed solenoid installation information. Part Numbers: Right Front KL3Z-18B082-C, Left Front KL3Z-18B082-D, Right Rear KL3Z-18B084-C, Left Rear KL3Z-18B084-D. |
|---|---|
| SSM 48630 | 2020-04-02. Service bulletin. SUSPENSION. SSM 48630 - 2019-2020 F-150/Expedition/Navigator - Updated Diagnostic Procedure For The Intergrated Wheel End (IWE) System Some 2019-2020 F-150/Expedition/Navigator four wheel drive vehicles may exhibit a grinding/clicking/ratcheting noise from front axle area in 2H mode under acceleration or heavy loads. The WSM diagnostic routine for the IWE vacuum system has been updated with new leak specifications and a more efficient diagnostic process. Refer to Workshop Manual (WSM), Section 308-07A > Symptom Chart - NVH for the symptom Grinding/clicking/ratcheting noise from front axle in 2H mode under acceleration or heavy loads. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.