Recalls that may apply to the 1998 Ford Explorer
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 09V399000 | 2009-10-13. VEHICLE SPEED CONTROL. FORD IS RECALLING MODEL YEARS 1995-2003 WINDSTAR, 2000-2003 EXCURSION DIESEL, 1993-1997 AND 1999-2003 F-250 SD THROUGH F-550 SD DIESEL, 1992-2003 E-150 THROUGH E-550, 1995-2002 EXPLORER, 1997 AND 2002 MERCURY MOUNTAINEER, 1995-1997 AND 2001-2003 RANGER, AND 1994 F53 VEHICLES EQUIPPED WITH THE TEXAS INSTRUMENTS SPEED CONTROL DEACTIVATION SWITCH (SCDS). THE SCDS MAY LEAK INTERNALLY AND THEN OVERHEAT, SMOKE, OR BURN. Built 1994-08-11 to 2002-08-30. |
|---|---|
| 06V286000 | 2006-08-01. VEHICLE SPEED CONTROL. ON CERTAIN TRUCKS EQUIPPED WITH SPEED CONTROL, GASOLINE OR NATURAL GAS ENGINES, THE SPEED CONTROL DEACTIVATION SWITCH MAY OVERHEAT. |
| 03V281000 | 2003-08-05. SEATS:FRONT ASSEMBLY:RECLINER. ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH HIGH BACK SEATS, THE UPPER BOLT ON THE DRIVER'S SIDE HIGH BACK SEAT, THAT ATTACHES THE SEAT RECLINER MECHANISM TO THE SEAT BACK FRAME, COULD FRACTURE. IF THE BOLT FRACTURES AND DOES NOT JAM IN THE SEAT BACK FRAME, THE SEAT BACK MAY RECLINE UNTIL IT MAKES CONTACT WITH AN OBJECT BEHIND THE SEAT, SUCH AS THE SECOND ROW SEAT CUSHION. Built 1997-05-13 to 2000-12-24. |
| 00V422000 | 2000-12-27. VEHICLE SPEED CONTROL. VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES EQUIPPED WITH 4.0L SOHC ENGINES AND STILL RETAIN THE ORIGINAL THROTTLE BODY (PART NUMBERS 97JF-9E926AB OR 97JF-9E926-AC). SOME OF THE ORIGINAL THROTTLE BODIES INSTALLED ALLOWED A GAP BETWEEN THE PLATE AND BORE TO BE BUILT TOO NARROW. THIS REDUCED CLEARANCE ALLOWED THE ENGINE DEPOSITS NORMALLY PRESENT IN THE THROTTLE BODY TO CONTACT OR BRIDGE THE GAP. IF THE ENGINE DEPOSITS BRIDGED THE GAP BETWEEN THE THROTTLE PLATE AND BORE AND THEN HARDENED, ON THE INITIAL APPLICATION OF THE ACCELERATOR PEDAL AFTER THE ENGINE HAS COOLED, THE OPERATOR WOULD NEED TO APPLY ADDITIONAL FORCE TO THE ACCELERATOR PEDAL TO BREAK THE BRIDGE. Built 1996-05-29 to 1998-10-20. |
| 00V168000 | 2000-06-19. EXTERIOR LIGHTING. VEHICLE DESCRIPTION: MINI VANS, LIGHT PICKUP TRUCKS, AND SPORT UTILITY VEHICLES. OFF LEASE CANADIAN VEHICLES EQUIPPED WITH DAYTIME RUNNING LIGHTS WHICH MEET CANADIAN REQUIREMENTS AND NOT THE PHOTOMETRIC REQUIREMENTS OF FMVSS 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." ACCORDING TO FORD, THE VEHICLES WERE IMPORTED INTO THE U.S. ERRONEOUSLY. |
| 99V164000 | 1999-06-29. LATCHES/LOCKS/LINKAGES:HOOD:LATCH. VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE SECONDARY HOOD LATCH MAY CORRODE AT THE LATCH PIVOT AND STICK IN THE OPEN POSITION. Built 1997-04-25 to 1999-05-17. |
| 99V062001 | 1999-03-30. VEHICLE SPEED CONTROL. VEHICLE DESCRIPTION: CERTAIN 1997-1999 RHD EXPLORER EQUIPPED WITH 4.0L OHV/SOHC ENGINES AND CRUISE CONTROL BUILT FROM MAY 29, 1996 THROUGH MARCH 4, 1999; 1998-1999 EXPLORER/MOUNTAINEERS EQUIPPED WITH 4.0L OHV/SOHC OR 5.0L ENGINES OR 1998-1999 RANGERS EQUIPPED WITH 2.5L, 3.0L FFV/EFI OR 4.0L ENGINES AND CRUISE CONTROL BUILT FROM JANUARY 5, 1998 THROUGH MARCH 4, 1999; 1998-1999 MUSTANGS EQUIPPED WITH 3.8L, 4.6L 2-VALVE OR 4-VALVE ENGINES AND CRUISE CONTROL BUILT FROM MARCH 2, 1998 THROUGH MARCH 4, 1999; 1999 F250/F350/F450/F550 (OVER 8,500 LBS.) TRUCKS EQUIPPED WITH 5.4L OR 6.8L ENGINES AND CRUISE CONTROL BUILT FROM MARCH 2, 1998 THROUGH MARCH 4, 1999; AND 1999 F-53 STRIPPED CHASSIS EQUIPPED WITH 5.4L OR 6.8L ENGINES AND CRUISE CONTROL BUILT FROM MARCH 2, 1998 THROUGH MARCH 4, 1999. A CRUISE CONTROL CABLE CAN INTERFERE WITH THE SPEED CONTROL SERVO PULLEY AND NOT ALLOW THE THROTTLE TO RETURN TO IDLE WHEN DISENGAGING THE CRUISE CONTROL. Built 1996-05-29 to 1999-03-04. |
| 98V060000 | 1998-03-19. FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS. VEHICLE DESCRIPTION: MULTI-PURPOSE PASSENGER VEHICLES EQUIPPED WITH 4.0L SINGLE OVERHEAD CAM ENGINES. THE ENGINE FUEL LINES CAN BE DAMAGED IF THE VEHICLE IS JUMP STARTED AND THE GROUND CABLE IS ATTACHED TO THE FUEL LINE BRACKET THAT IS LOCATED NEAR THE BATTERY. SINCE THE BRACKET IS NOT GROUNDED, THE STAINLESS STEEL FUEL LINE BRAID COULD ACT AS A GROUND POTENTIALLY OVERHEATING THE PTFE INNER LINER OF THE FUEL LINE RESULTING IN DAMAGE TO THE FUEL LINE. Built 1996-08-01 to 1998-02-01. |
| 97V215000 | 1997-11-24. ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE. VEHICLE DESCRIPTION: MULTI-PURPOSE PASSENGER VEHICLES, EDDIE BAUER AND LIMITED EDITIONS. THE KEY-IN-IGNITION/DOOR OPEN WARNING CHIME MAY NOT FUNCTION WHEN THE DOOR IS OPENED. THIS DOES NOT FULLY COMPLY WITH FMVSS NO. 114, "THEFT PROTECTION." Built 1997-08-05 to 1997-08-27. |
| 2019420 | 2019-08-21. Other. Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass. |
|---|---|
| 2009292 | 2009-10-14. Other. On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle is parked or when it is in operation. Correction: Dealers will install a new switch or fused wiring harness. Note: This is an expansion of recall 2005028 (05S28) for vehicles not previously included in the campaign. |
| 2006079 | 2006-04-18. Seats And Restraints. On certain Explorer, Explorer Sport and Explorer Sport Trac vehicles, the upper bolt on the driver's high back seat that attaches the seat recliner mechanism to the seat back frame could fracture. If this happens, the seat back may recline until it makes contact with an object behind the seat, such as the 2nd row seat cushion. The occupant could potentially lose contact with the steering wheel or foot pedals during such an event. Correction: Dealer will replace the driver's seat upper bolt. |
| 2005028 | 2005-02-14. Electrical. On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle is parked or when it is in operation. Correction: Initially as an interim repair, owners will be instructed to return their vehicles to their dealers to have the speed control deactivation switch disconnected. As soon as replacement parts are available, owners will be instructed to return to the dealers for installation of a new switch or fused wiring harness. |
| 2003190 | 2003-08-11. Seats And Restraints. On certain Explorer, Explorer Sport and Explorer Sport Trac vehicles, the upper bolt on the driver's high back seat that attaches the seat recliner mechanism to the seat back frame could fracture. If this happens, the seat back may recline until it makes contact with an object behind the seat, such as the 2nd row seat cushion. The occupant could potentially lose contact with the steering wheel or foot pedals during such an event. Correction: Dealer will replace the driver's seat upper bolt. |
| 2000308 | 2000-12-29. Engine. On certain vehicles, the original throttle bodies installed allowed a gap between the plate and bore to be built with reduced clearances or too narrow. This reduced clearance allowed the thin film of engine deposits normally present in the throttle body to contact or bridge the gap. If the engine deposits bridged the gap between the throttle plate and bore and hardened, on the initial application of the accelerator pedal after the engine has cooled, the operator would need to apply additional force to the accelerator pedal to break the bridge. This could result in the throttle body sticking closed. Correction: Original throttle bodies will be replaced on affected vehicles. |
| 1999133 | 1999-06-30. Structure. On certain vehicles, the secondary hood latch may corrode at the latch pivot and stick in the open position. If this occurs and the primary hood latch is either not engaged or is released, a hood fly-up may occur. If this occurs, the driver's forward vision could be obstructed, which could result in a collision. Correction: Dealers will install a secondary hood latch with components that are coated prior to assembly for improved latch pivot corrosion protection. |
| 1999061 | 1999-04-15. Engine. On certain vehicles, the speed control cable may interfere with the speed control servo pulley and not allow the throttle to return to idle when disengaging the speed control. If the speed control is used and this condition is present, a stuck throttle could result, which could potentially cause an accident. By not using speed control, this condition will not occur. Correction: Vehicles will be inspected and, if required, speed control cable will be replaced. |
| 1998052 | 1998-03-26. Fuel System. THE ENGINE FUEL LINES MAY BE DAMAGED IF THE FUEL LINE BRACKET NEAR THE BATTERY IS USED AS A GROUND WHILE JUMP STARTING THE VEHICLE. SINCE THE BRACKET IS NOT GROUNDED, THE STAINLESS STEEL FUEL LINE BRAID WILL ACT AS A GROUND. THIS COULD OVERHEAT THE PTFE INNER LINER OF THE FUEL LINE AND RESULT IN DAMAGE TO THE FUEL LINE. THIS COULD CAUSE FUEL LEAKAGE AND IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR. CORRECTION: A LABEL WILL INSTALLED ADVISING OWNERS NOT TO USE THE FUEL LINE BRACKET AS A JUMP START GROUND. A REVISED BOLT WILL BE INSTALLED IN THE ALTERNATOR BRACKET TO PROVIDE A CONVENIENT JUMP START GROUND. |
| 1997209 | 1997-11-25. Other. NOTE: EDDIE BAUER AND LIMITED EDITIONS. THESE VEHICLES MAY NOT COMPLY WITH C.M.V.S.S. 114 - LOCKING SYSTEM. THE KEY-IN-IGNITION/DOOR OPEN WARNING CHIME IN THESE VEHICLES MAY NOT FUNCTION WHEN THE DOOR IS OPENED. THE CLOCKSPRING FOR VEHICLES WITH REDUNDANT STEERING CONTROLS DOES NOT CONTAIN A GROUNDING CIRCUIT FOR THE KEY-IN-IGNITION CIRCUITRY. CORRECTION: A CLOCKSPRING GROUND CIRCUIT WILL BE INSTALLED ON AFFECTED VEHICLES. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.