WenmarOpen by Wenmar Pro

Recalls that may apply to the 1999 Ford Expedition

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
05V3880002005-09-07. VEHICLE SPEED CONTROL. ON CERTAIN PICKUP TRUCKS AND SPORT UTILITY VEHICLES EQUIPPED WITH SPEED CONTROL, THE SPEED CONTROL DEACTIVATION SWITCH MAY OVERHEAT, SMOKE, OR BURN. Built to 2002-08-20.
00V0730002000-03-07. TRAILER HITCHES. VEHICLE DESCRIPTION: MULTI-PURPOSE VEHICLES. THE TRAILER HITCH ASSEMBLY TO THE FRAME ATTACHING BOLTS COULD LOSE THE CLAMP LOAD. Built 1996-07-22 to 1999-12-09.
99V0990001999-04-29. WHEELS:LUGS/NUTS/BOLTS/STUDS. VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES EQUIPPED WITH FOUR-WHEEL-DRIVE (4X4), 17" CHROME STEEL WHEELS. THE CLAMP LOAD CAN BE LOST ON THE WHEEL LUGS DUE TO INSUFFICIENT WHEEL CONTACT AREA WITH THE HUB. IN SOME CASES, THE CONTACT AREA CAN DEFORM, RESULTING IN A LOSS OF LUG NUT TORQUE. Built 1998-07-01 to 1999-04-12.
98V3120001998-12-07. FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS. VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE FUEL LINE ASSEMBLIES MAY HAVE BEEN DAMAGED BY THE SUPPLIER DURING MANUFACTURING, ALLOWING LEAKAGE. Built 1998-08-01 to 1998-08-24.
98V2960001998-11-17. SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES. VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THESE VEHICLES MAY HAVE A MISSING OR PARTIALLY INSTALLED RETAINER CLIP THAT HOLDS THE MASTER CYLINDER PUSH ROD TO THE BRAKE PEDAL ARM.
Canada: Transport Canada, as of 2026-10-19
20050282005-02-14. Electrical. On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle is parked or when it is in operation. Correction: Initially as an interim repair, owners will be instructed to return their vehicles to their dealers to have the speed control deactivation switch disconnected. As soon as replacement parts are available, owners will be instructed to return to the dealers for installation of a new switch or fused wiring harness.
20041642004-05-18. Steering. On certain vehicles, Ford has issued a scheduled maintenance guide update which specifies that every 20 000 kms, the steering linkage, which includes tie-rod ends, should be inspected. The vehicle owner is asked to place the tie-rod end inspection procedure supplied with this maintenance guide update in the vehicle's glove box for reference and safekeeping. The vehicle owner is to provide the inspection procedure to their repair facility to help properly identify worn tie-rod ends. Performing the vehicle scheduled maintenance, including maintenance inspections, is the responsibility of the vehicle owner. Failure to replace worn tie-rod ends may eventually result in a tie-rod end separation that could adversely affect steering control. If the inspection reveals that a tie-rod end is worn and must be replaced, the repair will be at the owner's expense unless the vehicle is still covered by the basic vehicle warranty, or has an extended service plan coverage that includes these components.
20002812000-11-28. Lights And Instruments. On certain vehicles, the daytime running lamp circuit contains a resistor that is corroding. If this occurs, the resistive element can open, resulting in a loss of daytime running lamp (DRL) function. If DRL function is lost, there may be reduced vehicle conspicuity, which could increase the risk of a vehicle crash. Correction: Dealers will install a sealed daytime running lamp resistor.
20000792000-03-20. Structure. On certain vehicles, the trailer hitch assembly attachment bolts may lose clamp load. If the operator does not notice the condition due to rattle or other looseness of the trailer hitch assembly, there is a potential for the trailer hitch to separate from the vehicle. Correction: Trailer hitch mounting bolts and nut plates will be replaced with higher strength mounting bolts and nut plates installed at a higher torque and including an adhesive patch.
19990771999-05-06. Suspension. Certain vehicles equipped with 17 inch chrome steel wheels may lose clamp load on the wheel due to insufficient wheel contact area with the hub. In some cases the contact area may deform, resulting in a loss of lug nut torque. Loss of lug nut torque could cause vibration or separation of a wheel and tire from the vehicle, which could potentially result in loss of vehicle control and a crash without prior warning. Correction: Dealers will retorque the wheel lug nuts to 110 lb-ft. and install a label on the road wheels that specifies that the wheel lug nuts be torqued to 110 lb-ft any time the wheel is removed.
19982451998-12-21. Fuel System. Certain vehicles have fuel line assemblies that could have been damaged by the supplier during manufacturing and could develop a leak. Fuel leakage in the presence of an ignition source may potentially result in a fire. Correction: vehicles will be inspected and front and rear fuel line assemblies will be replaced if necessary.
19982351998-11-27. Brakes. Certain vehicles may have a missing or partially installed retainer clip that holds the master cylinder push rod to the brake pedal arm. Improperly installed or missing retainers can cause the brake pedal arm to disengage from the master cylinder pushrod and result in loss of service braking without prior warning. Correction: Vehicles will be inspected to verify that the pushrod retainer was installed and ensure correct installation.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.