WenmarOpen by Wenmar Pro

Service bulletins for the 2023 Ford Bronco

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

210 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
SSM 515362023-05-04. Service bulletin. STRUCTURE. For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
SSM 515382023-05-04. Service bulletin. STRUCTURE:BODY:HOOD. Some 2022-2023 Bronco vehicles built on or after 01-Sep-2022 may exhibit an intermittent illuminated hood ajar indicator on the instrument panel cluster and/or a false alarm activation caused by a hood ajar event. This may be due to an internal failure of the hood latch. For vehicles that meet this criteria, replace the hood latch (service base part number 16700) to repair the vehicle. For claiming use the causal part number 16700 and applicable labor operations in Section 12 of the Service Labor Time Standards (SLTS).
SSM 513762023-03-04. Service bulletin. EQUIPMENT; STRUCTURE:BODY:DOOR. Some 2021-2023 Bronco vehicles may exhibit a creak/pop type noise when any of the side doors are opened and closed. This may be due to incorrect door installation, alignment and/or incorrect tightening of the two bolts which hold the door to the vehicle body. To correct this condition, inspect for and address any damage to the door and/or latch components, then remove and reinstall the suspect door following the instructions located in the Digital Owners Manual, Removable Vehicle Components > Removable Doors > Removing and Installing the Doors. In this section you ll also find a detailed tutorial video of the process. If the noise persists, perform the Front/Rear Door Alignment procedure located in the Workshop Manual (WSM), Section 501-03 Body Closures.
TSB 23-20242023-01-31. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE:BODY:ROOF AND PILLARS. Some 2021-2023 Bronco vehicles equipped with a factory soft top roof may exhibit a headliner that is detaching from the soft top material. This may be due to the factory installation process. To correct this condition, follow the Service Procedure to reattach the headliner or replace
TSB 23-20132023-01-31. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS; VISIBILITY:SUN/MOON ROOF ASSEMBLY. Some 2021-2023 Bronco vehicles equipped with a factory soft top roof may experience snow or sand accumulation on the vehicles interior during a strong storm with high winds. To correct this condition, follow the Service Procedure to retrofit the soft top assembly.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.