WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Fiat 500X

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

97 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
S22080000732022-05-31. Service bulletin. ELECTRICAL SYSTEM. No Start, After Flash And Or PCM Replace, DTC P0513 Invalid Skim Key Setting
S1708000118 RevB2022-05-31. Service bulletin. ELECTRICAL SYSTEM. Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination Or Extended Operation After Key Off
08-087-212021-06-28. Service bulletin. ELECTRICAL SYSTEM. Flash: Body Control Module (BCM) Updates This bulletin involves reprogramming the BCM with the latest available software. Customers may notice the following: Message on the Instrument Panel Cluster (IPC) - Headlamp (low beam) is out but the headlamps are all functioning properly.
18-039-212021-05-24. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DTChas been set: P2110 - Electronic Throttle Control System Bank 1 - Forced Limited RPM. P2173 - High Airflow/Vacuum Leak Detected (Slow Accumulation). U0100 - Lost Communication With ECM/PCM. The following DTCs have been changed from a one trip fault to a two trip fault: P0607 - ECU Internal Performance. In addition, the customer may also experience the following: The vehicle will not crank if the ECM gets hotter than 50 °C (122°F).
S2008000125 Rev.2021-03-15. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS:HIGH/LOW BEAM DIMMER SWITCH; EQUIPMENT; ELECTRICAL SYSTEM:SOFTWARE. Low Beam Headlamp Out Message Displayed On EVIC Intermittently. DTC B162F-64 Or B1638-64
90042932020-09-28. Service bulletin. ELECTRICAL SYSTEM:BODY CONTROL MODULE:SOFTWARE; EXTERIOR LIGHTING:HEADLIGHTS. MODULE, Body Controller, Telematics If the BCM is being replaced due to a confirmed/reported Low Beam Headlight Out message, and the headlights are functional, please refer to SOL Publication S2008000125. Per the SOL, software is being developed to address the issue and component replacement will not resolve this issue.
S20080000102020-08-24. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM. Apple Carplay Inoperative Or Not Working, Phone Not Pairing, Carplay Lockup, Freeze or Audio Concerns
18-029-20 REV. A2020-06-22. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM; ENGINE. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC) has been set:U0100 - Lost Communication With ECM/PCM. In addition, the customer may also experience the following: The vehicle will not crank if the ECM gets hotter than 50 °C (122°F).
08-049-202020-05-26. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
21-027-202020-05-26. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN; EXTERIOR LIGHTING. Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find oneor more of the following Diagnostic Trouble Codes (DTCs) have been set:P0780 - Gear Shift Malfunction. P1DD2-00 - Torque Request Signal From TCM Denied. Customers or technicians may experience the following:Transmission will be placed into Limp-in mode. While driving at 65 kph (40 mph) a bump will be felt and the RPM will jumpto 4000 RPM.
18-029-202020-05-26. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC) has been set:U0100 - Lost Communication With ECM/PCM. In addition, the customer may also experience the following:The vehicle will not crank if the ECM gets hotter than 50 °C (122 °F).
21-027-202020-05-18. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find oneor more of the following Diagnostic Trouble Codes (DTCs) have been set:P0780 - Gear Shift Malfunction. P1DD2-00 - Torque Request Signal From TCM Denied. Customers or technicians may experience the following:Transmission will be placed into Limp-in mode. While driving at 65 kph (40 mph) a bump will be felt and the RPM will jumpto 4000 RPM.
18-029-202020-05-18. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC) has been set:U0100 - Lost Communication With ECM/PCM. In addition, the customer may also experience the following:The vehicle will not crank if the ECM gets hotter than 50 °C (122 °F).
21-027-202020-04-27. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P0780 - Gear Shift Malfunction. P1DD2-00 - Torque Request Signal From TCM Denied. Customers or technicians may experience the following: Transmission will be placed into Limp-in mode. While driving at 65 kph (40 mph) a bump will be felt and the RPM will jump to 4000 RPM.
18-029-202020-04-27. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC) has been set:U0100 - Lost Communication With ECM/PCM. In addition, the customer may also experience the following:The vehicle will not crank if the ECM gets hotter than 50 °C (122 °F).
S20080000132020-04-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Key Programming, Security Pin Request, Pin Invalid

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.