Recalls that may apply to the 2012 Dodge Ram
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
Only campaigns about POWER TRAIN are shown.
| 17V821000 | 2017-12-20. POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT. Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition. Built 2008-05-28 to 2016-12-31. |
|---|---|
| 13V344000 | 2013-08-06. POWER TRAIN:AUTOMATIC TRANSMISSION. Chrysler Group LLC (Chrysler) is recalling certain model year 2012 RAM 3500 trucks manufactured May 4, 2012, through August 7, 2012; and model year 2012 RAM 4500 and 5500 trucks manufactured May 3, 2012, through August 7, 2012. Due to a loose snap ring inside the transmission, there may be a loss of power transfer through the transmission to the wheels. Built 2012-05-03 to 2012-08-07. |
| 13V239000 | 2013-06-04. POWER TRAIN:AXLE ASSEMBLY. Chrysler Group LLC (Chrysler) is recalling certain model year 2012 RAM 4500 and 5500 trucks manufactured February 2, 2012, to December 22, 2012. Due to a welding issue with the front axle carrier, the front drive shaft may fracture and result in a loss of motive power and damage to surrounding components if the shaft continues to spin. Built 2012-02-02 to 2012-12-22. |
| 13V038000 | 2013-02-06. POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT. Chrysler is recalling certain model year 2009-2012 Ram 1500 trucks manufactured from February 27, 2008, through June 30, 2009, and from December 1, 2009, through October 20, 2011; model year 2009-2011 Dodge Dakota trucks manufactured from February 27, 2007, through June 30, 2009, and from December 1, 2009, through September 30, 2011; model year 2009 Chrysler Aspen trucks manufactured from January 3, 2008, through December 18, 2008; and model year 2009 Dodge Durango trucks manufactured from January 3, 2008, through December 18, 2008. The rear axle pinion nut may loosen due to an undersized pinion spline that can allow relative motion between the nut and companion flange. Built 2009-12-01 to 2011-10-20. |
| None found. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.