WenmarOpen by Wenmar Pro

Service bulletins for the 2010 Dodge Ram

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

267 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Suspension are shown. Show all

Bulletins, newest first
1805014REVA2022-09-26. Service bulletin. ELECTRICAL SYSTEM; SUSPENSION. Flash: Drone or Vibration Present During MDS Operation This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. New PCM software is being released to address a customer?s concern of a drone or vibration type condition while driving at highway speeds during MDS (Multiple Displacement System) operation.In addition, the following powertrain system improvements/enhancements are also included in this software release: Improved Electronic Voltage Regulator control to more precisely maintain system voltage. Enhanced Automatic Oil Change Indicator(EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. (Only applies to vehicles using a block heater in ambient temperatures greater than -20°F(-29°C)).
M34113020122022-07-25. Service bulletin. POWER TRAIN; AIR BAGS; PARKING BRAKE; SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY. Advanced Field Action Communication ? M3411302012 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2009 and 2010 model year (DS) Ram 1500 series trucks and (ND) Dodge Dakota trucks equipped with a Chrysler built 9.25? rear axle. The above vehicles may have been built without an adhesive patch on the rear axle pinion nut threads. The lack of this adhesive patch could allow the rear axle pinion nut to loosen and/or the rear driveshaft to separate from the rear axle. A loose pinion nut could cause the rear axle to seize and a separated driveshaft could cause a loss of motive power. Excessive loosening of the rear axle pinion nut can allow the pinion gear to be drawn into the rear axle assembly, resulting in rear axle lock-up. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Unfortunately, the parts required to provide a permanent remedy for this condition are currently not available. Chrysler anticipates the remedy parts will be available within the 1st quarter of 2013. An interim notification letter is being mailed to all involved vehicle owners. Chrysler is required by Federal law to inform all involved vehicle owners of a potential vehicle safety defect.
M34113020122018-05-14. Service bulletin. EQUIPMENT:MECHANICAL; SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY. Advanced Field Action Communication ? M3411302012 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2009 and 2010 model year (DS) Ram 1500 series trucks and (ND) Dodge Dakota trucks equipped with a Chrysler built 9.25? rear axle. The above vehicles may have been built without an adhesive patch on the rear axle pinion nut threads. The lack of this adhesive patch could allow the rear axle pinion nut to loosen and/or the rear driveshaft to separate from the rear axle. A loose pinion nut could cause the rear axle to seize and a separated driveshaft could cause a loss of motive power. Excessive loosening of the rear axle pinion nut can allow the pinion gear to be drawn into the rear axle assembly, resulting in rear axle lock-up. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Unfortunately, the parts required to provide a permanent remedy for this condition are currently not available. Chrysler anticipates the remedy parts will be available within the 1st quarter of 2013. An interim notification letter is being mailed to all involved vehicle owners. Chrysler is required by Federal law to inform all involved vehicle owners of a potential vehicle safety defect.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.