WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Dodge Journey

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

223 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
S21210000052021-05-24. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. 62TE 6-Speed Transmission Cracked Torque Converter (TC) Piston Repair Index, To Aid In Diagnosis And Repair
S1809000007 Rev.2021-04-26. Service bulletin. ENGINE AND ENGINE COOLING. Customer complaint may include engine oil leak/consumption.
90033572021-04-26. Service bulletin. ENGINE AND ENGINE COOLING. ADAPTER, Engine Oil Filter (Pentastar V6) All vehicles equipped with a 3.2L or 3.6L except for model year 2014 vehicles with leak concern: 1) Ensure the Oil Filter Adapter (OFA) Cap O-ring is seated in the proper groove in the cap and not damaged or cut. 2) If replacing the (OFA) due to a leak detected between (OFA) and block. Ensure the torque on the 5 bolts are torqued to 12nm. If not record the actual values, torque to 12nm and contact the FCA employees listed below. 3) Remove the (OFA) and replace the O-ring and gaskets only (Kit #68191356A$), NOT THE OFA. 4) If oil was drained, add oil dye to ensure the leak is repaired. For model year 2014 vehicles replace the Oil Filter Adaptor. 5) When replacing PN's 68310865A$ & 68308741A$, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
09-006-162020-10-26. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE; EQUIPMENT. 2.0L Or 2.4L Long Block Replacement This bulletin involves replacing the long block due to incorrect machining operation on the cylinder head. The customer may describe the engine is consuming oil.
S1121000006 Rev.2020-09-28. Service bulletin. ELECTRICAL SYSTEM; ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION. (Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
S20080001132020-09-28. Service bulletin. ENGINE; ELECTRICAL SYSTEM. No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle
90042682020-07-27. Service bulletin. ENGINE. THROTTLE BODY For clarification, only use 68414676A$ on 2010 & earlier vehicles as supply is limited.
90042062020-06-22. Service bulletin. POWER TRAIN; ENGINE. Remanufactured Transmission Assembly 1. All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 3. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 4. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.
S20080000272020-05-18. Service bulletin. ENGINE AND ENGINE COOLING. Vehicle Does Not Start, No Crank
S20080000272020-04-27. Service bulletin. ENGINE. Vehicle Does Not Start, No Crank
18-089-192019-12-16. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE. wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
05184349A2019-05-20. Service bulletin. ENGINE AND ENGINE COOLING. Before replacing this part for debris issue faults, please call the following people;~ Engineering is seeking information regarding this part.~ Bob Smith ? Cell (248) 202-9458 - Robert.M.Smith@fcagroup.com~ If a response is not received within 15 mins, then proceed with the necessary repair.~
18-014-15 REV-A2018-11-19. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Flash: 3.6L Or 2.4L Diagnostic and System Improvements This bulletin involves updating the Powertrain Control Module (PCM) software. The customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory. 2.4L Engine ? P0441 - EVAP Purge System Performance. ? P0443 - EVAP Purge Solenoid Circuit. ? P0456 - EVAP System Small Leak. ? P0116 - Engine Coolant Temperature Sensor Performance. ? P219A - Air-Fuel Ratio Cylinder Imbalance Bank 1. ? U0140 - Lost Communication With Body Control Module. ? Improve alternator control at Idle. 3.6L Engine ? Improved shift quality. ? U0140 - Lost Communication With Body Control Module. ? P0300 - Multiple Cylinder Misfire. ? P000A - Bank 1 Camshaft 1 Position Slow Response. ? P000B - Bank 1 Camshaft 2 Position Slow Response.
18-014-152018-09-24. Service bulletin. ELECTRICAL SYSTEM; ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Flash: 3.6L Or 2.4L Diagnostic and System Improvements This bulletin involves updating the Powertrain Control Module (PCM) software. The customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2.4L Engine ? P219A - Air-Fuel Ratio Cylinder Imbalance Bank 1. ? U0140 - Lost Communication With Body Control Module. ? Improve alternator control at Idle. 3.6L Engine ? U0140 - Lost Communication With Body Control Module. ? P0300 - Multiple Cylinder Misfire. ? P000A - Bank 1 Camshaft 1 Position Slow Response. ? P000B - Bank 1 Camshaft 2 Position Slow Response.
09-006-162018-06-18. Service bulletin. EQUIPMENT; ENGINE. 2.0L Or 2.4L Long Block Replacement This bulletin involves replacing the long block due to incorrect machining operation on the cylinder head. The customer may describe the engine is consuming oil.
90036942018-06-11. Service bulletin. ENGINE AND ENGINE COOLING. Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
68105583A2018-06-11. Service bulletin. ENGINE AND ENGINE COOLING. Pentastar Oil Filter Adapter: Before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ Dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated Service Bulletin Number 09-008-15. ~ First: Nick Morand Cell (248) 410-8078 - Nick.morand@fcagroup.com Second: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Third: Joe Lovell Cell (734 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.~
18-033-162018-06-04. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Flash: Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2.4L Engine · **P0335 - Crankshaft Position Sensor Circuit. · P0301 - Cylinder 1 Misfire. · P0302 - Cylinder 2 Misfire. · P0303 - Cylinder 3 Misfire. · P0304 - Cylinder 4 Misfire. · P1607 - PCM Internal Shutdown Timer Rationality - (Powertrain Control Module). · P2610 - PCM Internal Engine Off Timer Performance - (Powertrain Control Module). · P0456 - EVAP System Small Leak.** · P0441 - EVAP Purge System Performance. · P0443 - EVAP Purge Solenoid Circuit. · P0116 - Engine Coolant Temperature Sensor Performance. · P219A - Air-Fuel Ratio Cylinder Imbalance Bank 1. · U0140 - Lost Communication With Body Control Module (BCM). In addition, the following software enhancement is available: Improved alternator control at idle. 3.6L Engine · **P0335 - Crankshaft Position Sensor Circuit. · P2610 - PCM Internal Engine Off Timer Performance. · P0456 - EVAP System Small Leak.** · P0300 - Multiple Cylinder Misfire. · P000A - Bank 1 Camshaft 1 Position Slow Response. · P000B - Bank 1 Camshaft 2 Position Slow Response. In addition, the following software enhancement is available: Improved shift quality.
RL108213A$2017-11-03. Service bulletin. ENGINE AND ENGINE COOLING. NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
18-081-172017-11-03. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; POWER TRAIN. Flash: Powertrain Diagnostic and System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software.This bulletin applies to vehicles within the following markets/countries: NAFTA, LATAM, EMEA and APAC. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory:2.4L EngineP0335 - Crankshaft Position Sensor Circuit. P0301 - Cylinder 1 Misfire. P0302 - Cylinder 2 Misfire. P0303 - Cylinder 3 Misfire. P0304 - Cylinder 4 Misfire. P1607 - PCM Internal Shutdown Timer Rationality - (Powertrain Control Module). P2610 - PCM Internal Engine Off Timer Performance - (Powertrain Control Module). P0456 - EVAP System Small Leak. P0441 - EVAP Purge System Performance. P0443 - EVAP Purge Solenoid Circuit. P0116 - Engine Coolant Temperature Sensor Performance. P219A - Air-Fuel Ratio Cylinder Imbalance Bank 1. U0140 - Lost Communication With Body Control Module (BCM). Customers may also notice one or more of the following symptoms:When coming to a stop or making a turn, their vehicle would suddenly shutoff. Mostly noted in high ambient conditions greater than 40° C (105° F)(ED3 Engine only). A hesitation/surge feel that some customers might note it feels like misfire at 65-110 kph (40-70 mph) in 4th gear lock up(ED3 Engine only). In addition, the following software enhancements are available:Start Improvements for cold or high altitude starts when using E15 fuel(ED3 Engine only). 3.6L EngineP0335 - Crankshaft Position Sensor Circuit. P2610 - PCM Internal Engine Off Timer Performance. P0456 - EVAP System Small Leak. P0300 - Multiple Cylinder Misfire. P000A - Bank 1 Camshaft 1 Position Slow Response. P000B - Bank 1 Camshaft 2 Position Slow Response. In addition, the following software enhancement is available:Improved shift quality.
90033552017-11-03. Service bulletin. ENGINE AND ENGINE COOLING. 3.2L - 3.6L Cylinder Head Assy Multiple cylinder head replacement. If a cylinder head is replaced on a vehicle more than 1 time for any reason, please call any of the following people. First: Joe Lovell - Cell (734) 309-6467 joe.lovell@fcagroup.com Second: Kevin Refalo - Cell (248) 260-0738 Kevin.refalo@facgroup.com If no response in 15 minutes, proceed with repair.
68141352A$2017-11-03. Service bulletin. ENGINE AND ENGINE COOLING. 3.2L - 3.6L Cylinder Head Assy Multiple cylinder head replacement. If cylinder head is replaced on a vehicle more than 1 time for any reason, please call any of the following people.~ First: Ron Dallison ? Cell (248) 292-9510 Ron.dallison@fcagroup.com ~ Second: Joe Lovell - Cell (734) 309-6467 joe.lovell@fcagroup.com~ If a response is not received within 15 mins, then proceed with the necessary repair.
S18 v.22017-11-03. Service bulletin. ENGINE AND ENGINE COOLING. NOTE: S18 originally published in July. Manverter changed to Maniverter. Alternate Transportation section wording revised. Customer Satisfaction Notification S18 - Engine Oil Consumption The engine on about 480 of the above vehicles may experience low oil pressure originating from an oil consumption issue. This may result in oil starvation and possible engine failure. The engine long block assembly must be replaced on the involved vehicles.
S182017-11-03. Service bulletin. ENGINE AND ENGINE COOLING. Customer Satisfaction Notification S18 - Engine Oil Consumption The engine on about 480 of the above vehicles may experience low oil pressure originating from an oil consumption issue. This may result in oil starvation and possible engine failure. The engine long block assembly must be replaced on the involved vehicles.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.