WenmarOpen by Wenmar Pro

Recalls that may apply to the 1999 Dodge Dakota

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
01V1530002001-05-08. AIR BAGS. VEHICLE DESCRIPTION: PICKUP TRUCKS. SOUND DEADENER MATERIAL INSIDE THE STEERING WHEEL COULD BECOME DETACHED FROM THE COVER AND HOUSING. NOTE: THE RAM PICKUP TRUCKS WERE BUILT AT THE WARREN ASSEMBLY PLANT ("S" IN THE 11TH VIN POSITION) FROM MAY 16, 2000 THROUGH OCTOBER 23, 2000; ST. LOUIS NORTH ASSEMBLY PLANT ("J" IN THE 11TH VIN POSITION) FROM MAY 19, 2000 THROUGH OCTOBER 23, 2000; LAGO ALBERTO ASSEMBLY PLANT ("M" IN THE 11TH VIN POSITION) FROM MAY 23, 2000 THROUGH OCTOBER 23, 2000; AND SALTILLO ASSEMBLY PLANT ("G" IN THE 11TH VIN POSITION) FROM MAY 23, 2000 THROUGH OCTOBER 23, 2000. IMPORTANT: VEHICLES THAT HAVE ALREADY HAD THE PROPER CLOCKSPRING INSTALLED, ACCORDING TO WARRANTY RECORDS, HAVE BEEN EXCLUDED FROM THIS RECALL. IN ADDITION, 1997-2000 MODEL YEAR VEHICLES THAT HAVE HAD A SUSPECT REPLACEMENT CLOCKSPRING INSTALLED, ACCORDING TO WARRANTY RECORDS, HAVE BEEN ADDED TO THIS RECALL. Built 2000-05-30 to 2000-10-31.
01V1190002001-04-11. SEAT BELTS:FRONT:RETRACTOR. VEHICLE DESCRIPTION: CERTAIN VAN, WAGON, PICKUP TRUCKS, PASSENGER AND SPORT UTILITY VEHICLES, FAIL TO COMPLY WITH REQUIREMENTS OF FMVSS NO. 209, "SEAT BELT ASSEMBLIES." THE FRONT SEAT BELT RETRACTOR MAY NOT COMPLY WITH THE REQUIREMENTS OF THE STANDARD. Built 1998-12-06 to 1999-01-15.
00V1980002000-07-17. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS. VEHICLE DESCRIPTION: PICKUP TRUCKS. SOME VEHICLES MAY HAVE BEEN BUILT WITH INADEQUATE CLEARANCE BETWEEN THE REAR AXLE VENT HOSE AND THE BRAKE HOSE. Built 1996-07-01 to 1999-08-31.
00V1930002000-07-17. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS. VEHICLE DESCRIPTION: PICKUP TRUCKS BUILT WITH 2.5L ENGINES. SOME VEHICLES MAY HAVE BEEN BUILT WITH INADEQUATE CLEARANCE BETWEEN THE LEFT FRONT BRAKE TUBE AND THE POWER STEERING HOSE. Built 1996-07-01 to 1999-09-01.
Canada: Transport Canada, as of 2026-10-19
20011342001-05-24. Seats And Restraints. Certain vehicles fail to comply with requirements of C.M.V.S.S. No. 209, "Seat Belt Assemblies." The front seat belt retractor may not work properly, it therefore will not adequately protect occupants in the event of a crash. Correction: Dealers will replace the seat belt retractor.
20001702000-08-28. Brakes. On certain vehicles, the rear axle vent hose could contact the rear brake hose which eventually could wear a hole in the brake hose. Perforation of the rear brake hose will result in a loss of braking force at the rear wheels. Correction: Rear brake hoses will be inspected for evidence of wear. Worn brake hoses will be replaced. The rear axle vent hose will be shortened by 8 cm and a clip will be installed to assure the clearance between the axle vent line and the brake hose is maintained.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.