WenmarOpen by Wenmar Pro

Service bulletins for the 2025 Dodge Charger

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

268 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
08-026-25 REV. A2025-02-19. Service bulletin. ELECTRICAL SYSTEM; WHEELS; UNKNOWN OR OTHER. "Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle mayexhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):● C10F8-00 - Left Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance.● C10F9-00 - Right Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance.● P061B-00 - Internal Control Module Torque Calculation Performance.Customers may also comment on one or more of the following:● Wrench icon is illuminated on the Instrument Panel Cluster (IPC).● Turtle icon is illuminated on the IPC.● Vehicle enters into limp home mode. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine"
08-025-25 REV. A2025-02-19. Service bulletin. ELECTRICAL SYSTEM. "Flash: Battery Pack Control Module (BPCM) Updates **Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● P0CA6-00 - Hybrid/EV Battery Charging Current High. ● P167B-00 - Controlled System Shutdown.** Customers may also comment on one or more of the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Vehicle will not enter Drive Ready Mode. ● Battery range incorrect. This bulletin also includes the following software enhancements: ● **Bootloader update to prevent battery disconnect unit damage. ● Improvements in detecting pre-existing battery disconnect unit damage. ● Charging related enhancements that may lead to DTC P0CA6 falsely setting.** ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine "
S25080000092025-02-18. Service bulletin. ELECTRICAL SYSTEM. Flashing Odometer, No Diagnostic Trouble Codes (DTCs)
S228A000005 REV.E2025-02-18. Service bulletin. ELECTRICAL SYSTEM. Uconnect Box Error Message, With Active or Stored Cellular Antenna Open or Short Diagnostic Trouble Codes (DTCs)
S25080000142025-02-11. Service bulletin. ELECTRICAL SYSTEM. Security Gateway (SGW) Module is Setting Diagnostic Trouble Code (DTC) U3033-00 Control Module Security Certificate Missing or Invalid
S25080000112025-02-07. Service bulletin. ELECTRICAL SYSTEM. P1CDE-00 - Hybrid/EV Wake-Up Control 2 Output Circuit Short To Battery Set In The Battery Pack Control Module (BPCM)
S2508000002 REV.A2025-02-06. Service bulletin. ELECTRICAL SYSTEM. Mapping Interface Module (MIM) Erroneously Sets Diagnostic Trouble Codes (DTCs) B023C-49 and or U115C-00
S25080000072025-02-06. Service bulletin. ELECTRICAL SYSTEM. Digital Key Control Module (DKCM) is Grey Within the Scan Tool Topology View
08-027-252025-02-04. Service bulletin. ELECTRICAL SYSTEM. "Flash: Motor Control Processor A (MCP A) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine"
08-025-252025-02-04. Service bulletin. ELECTRICAL SYSTEM. "Flash: Battery Pack Control Module (BPCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0ADB-00 - Hybrid/EV Battery Positive Contractor A Control Circuit Low. ● P0AE2-00 - Hybrid/EV Battery Precharge Contactor Circuit Stuck Closed. Customers may also comment on one or more of the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Vehicle will not enter Drive Ready Mode. ● Battery range incorrect. This bulletin also includes the following software enhancement: ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine"
08-024-252025-02-04. Service bulletin. ELECTRICAL SYSTEM. "Flash: Motor Control Processor B (MCP B) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine"
S1408000384 REV.H2025-01-28. Service bulletin. ELECTRICAL SYSTEM. Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
S25080000052025-01-10. Service bulletin. ELECTRICAL SYSTEM. Diagnostic Trouble Codes (DTCs) Setting in the Battery Pack Control Module (BPCM) During Servicing
S25080000022025-01-10. Service bulletin. ELECTRICAL SYSTEM. Mapping Interface Module (MIM) Erroneously Sets Diagnostic Trouble Codes (DTCs) B023C-49 and or U115C-00
S25080000012025-01-09. Service bulletin. ELECTRICAL SYSTEM. Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Firmware Over the Air (FOTA) Does Not Download or Battery Warning Lamp On
S1408000384 REV.G2025-01-09. Service bulletin. ELECTRICAL SYSTEM. Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
08-271-24 REV. A2025-01-07. Service bulletin. ELECTRICAL SYSTEM. "Flash: Amplifier Software Updates This bulletin involves reprogramming the Amplifier with the latest available software. Customers may comment on one or more of the following symptoms: ● Navigation volume too loud when at the default sound level. ● Phone call volume too loud when at the default sound level. ● Warning chime volume too loud when at the default sound level."
08-266-242025-01-03. Service bulletin. ELECTRICAL SYSTEM. "Flash: Battery Pack Control Module (BPCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P0ADB-00 - Hybrid/EV Battery Positive Contractor A Control Circuit Low. ● P0AE2-00 - Hybrid/EV Battery Precharge Contactor Circuit Stuck Closed. Customers may also comment on one or more of the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Vehicle will not enter Drive Ready Mode. ● Battery range incorrect. This bulletin also includes the following software enhancement: ● Improved battery State of Charge (SoC) accuracy. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine"
08-265-242025-01-03. Service bulletin. ELECTRICAL SYSTEM. "Flash: Motor Control Processor B (MCP B) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine."
08-264-242025-01-03. Service bulletin. ELECTRICAL SYSTEM. "Flash: Motor Control Processor A (MCP A) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine."
08-259-242025-01-03. Service bulletin. ELECTRICAL SYSTEM. "Flash: Electronic Vehicle Control Unit (EVCU) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10F8-00 - Left Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● C10F9-00 - Right Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● P061B-00 - Internal Control Module Torque Calculation Performance. Customers may also comment on one or more of the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon is illuminated on the IPC. ● Vehicle enters into limp home mode. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine."
S24080001272024-12-21. Service bulletin. ELECTRICAL SYSTEM. Instrument Panel Cluster (IPC) Sets Diagnostic Trouble Code (DTC) U0158-00 Lost Communication With the HUD Heads Up Display
S24080001262024-12-21. Service bulletin. ELECTRICAL SYSTEM. Diagnostic Trouble Code (DTC) B1A0A-00 Remote Keyless Entry (RKE) FOB 3 Performance
1015532024-11-13. Warranty extension. ELECTRICAL SYSTEM; UNKNOWN OR OTHER; POWER TRAIN. Warranty Bulletin D-24-19 Fast Feedback Program – Electrified Components, Driveline Components and Transmission Components – 2025 Jeep Wagoneer BEV (KM) and 2025 Dodge Charger BEV (LB)
S24080000882024-08-08. Service bulletin. ELECTRICAL SYSTEM. Radio (ETM) Is Setting Active DTC B15A1-00 Media Port Connection

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.