Service bulletins for the 2016 Dodge Charger
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
275 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| S2208000138 | 2023-01-17. Service bulletin. ELECTRICAL SYSTEM; TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS. Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed |
|---|---|
| S2108000163 | 2023-01-17. Service bulletin. ELECTRICAL SYSTEM. No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration |
| S2109000004 | 2023-01-17. Service bulletin. ENGINE AND ENGINE COOLING. Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle. |
| S1809000007 | 2023-01-17. Service bulletin. ENGINE. Customer Complaint May Include Engine Oil Leak Or Consumption |
| 31-002-22 | 2023-01-17. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels. |
| 3100122 | 2023-01-09. Service bulletin. STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components. |
| S2203000003 | 2023-01-09. Service bulletin. POWER TRAIN:DRIVELINE:DRIVESHAFT. Proper Front Driveshaft Universal Joint (U-joint) Inspection Procedures For All Wheel Drive (AWD) Vehicles. |
| 0806920 | 2023-01-09. Service bulletin. EQUIPMENT. Charger Pursuit Battery Testing and Replacement Interval Recommendation This information only bulletindiscusses using the correct test equipment and replacement interval for testing Charger Pursuit wet cell lead acid batteries. |
| W56 | 2023-01-09. Service bulletin. POWER TRAIN. Customer Satisfaction Notification W56 Reprogram Powertrain Control Module |
| V86 | 2023-01-09. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR. Emissions Recall V86 Catalytic Converter Efficiency |
| V86-1 | 2023-01-09. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR. Emissions Recall V86 Catalytic Converter Efficiency |
| 9003704 | 2023-01-09. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. Transmission Oil Pan, Heater (TMU), Tube or O-ring Applies to vehicles equipped with 8 speed transmissions only; if you have a leak that appears to be at the pan the use of proper leak detection is recommended. The fluid in the 8 speeds can be detected with a black light and there are aftermarket spray on leak detection materials to help ensure that the leak is properly diagnosed and not from another location such as cooler lines, heater tubes, or case porosity. Please note that the transmission pan gasket is available for many of the 8 speed applications FCA offers. Please review the available quick connect and transfer tube parts, as replacement of the TMU may not be required. If a TOC line connection is found to be the source, the quick connect may need replacement. If the leak source is coming from the connection of the TMU to the transmission, the transfer tube may need replacement. When parts are returned to the QEC the retaining clips (snap ring) for the quick disconnect fittings are missing. (This leaves a question as to whether the clips were missing from the assembly plant, or the technician removed them in order to make line removal easier.) Please return the clips with the transmission heater and note if they were not there to begin with. For any questions regarding transmission heater, contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. |
| S1709000010 | 2023-01-09. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary. |
| 68234120A | 2022-12-19. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Panasonic 8.4" CTP/FCTP Radio, Update Failure Issue 1: Hand Free Module inoperative, can't pair phone: - Do not replace the radio for phone issues. The Radio does not control phone/Hands Free functionality, it is separate from the radio, test and diagnose the Hands Free Module accordingly.~ Issue 2; Radio inoperative, no power, display no power or screen is blank.~ Blank Screen with Audio: The ICS is a separate module from the radio. If attempting to replace the display (ICS), do not order a radio part number. Instead, order p/n Z5064993A$ for an exchange or 05064993A$ for a new part replacement.~ Issue 3.; If the radio ICS/touchscreen display appears to reset intermittently, it turns white then black and functionality returns....Please contact Leony Gonzalez at cell (248) 736-1267 or Dave Clemons at cell (248) 520-0419. Engineering is currently root causing this issue and your assistance is greatly appreciated. If unable to reach this person within 15 minutes, then proceed with the necessary repair. NOTE: USB cables should be replaced prior to the HFM or Radio. ~ |
| S2209000004 | 2022-12-19. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. |
| Parts-1 | 2022-11-21. Service bulletin. VISIBILITY; VISIBILITY/WIPER. Motor, Windshield Wiper. |
| 68184926A | 2022-11-21. Service bulletin. ELECTRICAL SYSTEM. Integrated Center Stack If vehicle is found within 50 mile radius of the Detroit Metro area please hold vehicle and contact:~ Contact one of the following:~ Daniel Acciacca CELL (586) 709-1537~ Michael Savich CELL (248) 214-7270~ Ayed Hadaad CELL (248) 941-8707~ Issue: On a 2015 & 2016MY LA (Challenger), LD(Charger) and LX (300), the Integrated Center Stack (ICS) may experience a lock-up/Inop condition (complete loss of functionality) during any vehicle diagnostic session (reading fault codes, clearing fault codes, reflashing of any module, etc.). If this occurs, do not replace the ICS. The module functionality can be restored if it is reset by disconnecting power to it (by removing fuse, battery disconnect or module connector disconnect).~ |
| 3100122 | 2022-10-31. Service bulletin. STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components. |
| 3100122 | 2022-10-31. Service bulletin. STRUCTURE:INTERIOR PANELS:DOOR; STRUCTURE; UNKNOWN OR OTHER. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components. |
| 9003704 | 2022-10-31. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. Trans Oil Pan, Heater Tube or O-ring, Heater Applies to vehicles equipped with 8 speed transmissions only; If you have a leak that appears to be at the pan the use of proper leak detection is recommended. The fluid in the 8 speeds can be detected with a black light and there are aftermarket spray on leak detection materials to help ensure that the leak is properly diagnosed and not from another location such as cooler lines, heater tubes, or case porosity. If you have a leak concern please note that the transmission pan gasket is available for many of the 8 speed applications FCA offers. See your parts specialist for the proper gasket for the repair. |
| 9003797 | 2022-10-31. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. 5.7L Cold End Exhaust RH Side (Resonator & Muffler) Engineering is currently investigating an issue where the back-end exhaust system (resonator and muffler right hand assembly) cracks at or around the weld near the muffler with Model Year '13, '14, '16, and '17 Charger and Challenger 5.7L. Please call Design Release Engineer Jeff Robinson at cell phone (315) 408-6055 and send a photo of the part to him at Jeff.Robinson@fcagroup.com. If no response in 15 minutes, please proceed with repair. |
| 2102816 | 2022-10-31. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. Flash: Transmission Shift And Drivability Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience a less than desirable down shift during one or more of the following: · 3-2 coast down shift. · 2-1 coast down shift. · 6-5 coast down shift. |
| 2103917 | 2022-10-24. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM; POWER TRAIN; AIR BAGS. Flash: Transmission Diagnostic and Shift Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. Customers may experience a less than desirable down shift during one or more of the following:3-2 coast-down shift. 2-1 coast-down shift. 6-5 coast-down shift. The following software enhancement is available for(6.4L Only):Reduce bumps felt on light to medium decel braking while coming to a stop. Bump could be described as a push, driveline clunk, or engine flare noise right after the 5-4 downshift. The vehicle speed may vary based on the rate of deceleration. |
| 1807517 | 2022-10-24. Service bulletin. BACK OVER PREVENTION; SEAT BELTS; ELECTRICAL SYSTEM; POWER TRAIN; AIR BAGS; EXTERIOR LIGHTING. Flash: Powertrain Diagnostic and System Improvements This bulletin involves reprogramming of the Powertrain Control Module (PCM) with the latest software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following DTCs: P000B - Bank 1 Camshaft 2 Position Slow Response. P0016 - Crankshaft/Camshaft Timing Misalignment - Bank 1 Sensor 1. P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P0441 - EVAP Purge System Performance. P0455 - EVAP System Large Leak. P2610 - PCM Internal Engine Off Timer Performance. P0456 - EVAP System Small Leak. P2299 - Brake Pedal Position/Accelerator Pedal Position Incompatible. Customers may also notice the following condition(s): Brief engine idle fluctuation while in hot ambient temperatures. A slight hesitation during light pedal application after engine cold start. Driveline noises. Engine stumble/hesitation on a very hard pedal acceleration from a dead stop. Transmission enhancements during low-speed braking turning maneuvers. False detonation (spark knock) detected during a wide-open throttle (LA Challenger Sales Codes ESH with DEC only). In addition, the following software enhancements are available: Reduce bumps felt on light to medium decal braking and coming to a stop. Launch spark improvement change from 35 MPH to 10 MPH. Reverse lock out speed change from 10 MPH to 3 MPH (Sales Code DEC only). Torque security calibration changes to desensitize brake throttle override entry conditions. Calibration changes to address engine speed undershoot/overshoot during clutch disengagement when coming to a stop (Sales Code DEC only). Start fuel and transient fuel calibration change for improved drivability robustness. Purge calibration changes for a more robust purge volume result at altitude. Individual Cylinder Fuel Control (ICFC) calibration changes for improved fueling offset accuracy. |
| 1807617 | 2022-10-24. Service bulletin. POWER TRAIN. Flash: Powertrain Diagnostic and System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with thelatest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Codes (DTCs) have been set:P2066 - Fuel Level Sensor 2 Performance (Sales Codes ERB with AHB or AHV only). P0335 - Crankshaft Position Sensor Circuit. P0456 - EVAP System Small Leak. P2610 - PCM Internal Engine Off Timer Performance. In addition to the above DTCs, this software release also includes:Enhancements to the disable misfire monitor when P0335 is present. Add a global disable to small leak monitor when the fuel level is above88%. Update small leak diagnostic to require five minutes of engine run-time and120 minutes of engine off-time. Updates to prevent false failure due to wrong ambient temperature reading. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.