Recalls that may apply to the 1982 Dodge ARIES
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 89V052000 | 1989-03-29. SUSPENSION:FRONT:CONTROL ARM:LOWER ARM. FRONT SUSPENSION CROSSMEMBER MAY CORRODE AND FAIL AT LOWER CONTROL ARM REAR PIVOT MOUNTS IF OPERATED WHERE SALT IS USED TO AID IN SNOW REMOVAL. Built 1980-08-01 to 1983-07-01. |
|---|---|
| 82V063000 | 1982-06-15. SERVICE BRAKES, HYDRAULIC:FLUID. THE BRAKE HYDRAULIC SYSTEM BAY BE EQUIPPED WITH BRAKE FLUID CONTAINING AN EXCESS OF WATER. Built 1982-05-01 to 1982-05-01. |
| 82V055000 | 1982-05-27. SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT. CLAMP BOLTS INSTALLED ON CERTAIN VEHICLES MAY CONTAIN CRACKS. EVENTUALLY THESE BOLTS MAY BREAK THROUGH, CAUSING SEPARATION OF THE BALL JOINT FROM THE STEERING KNUCKLE. Built 1982-04-01 to 1982-04-01. |
| 81V111000 | 1981-09-22. VEHICLE SPEED CONTROL. THE AUTOMATIC SPEED CONTROL SWITCH MAY STICK IN THE "RESUME" POSITION RESTRICTING RETURN MOVEMENT. THIS WILL NOT ALLOW THE NORMAL BRAKE PEDAL OPERATION TO DEACTIVATE THE SYSTEM. Built 1980-08-01 to 1981-07-01. |
| 1989072 | 1989-05-23. Fuel System. VEHICLES EQUIPPED WITH 2.2 LITRE PROPANE FUELLED ENGINES MAY EXPERIENCE CORROSION OF THE FILL AND OUTAGE (80% FILL LEVEL) FITTINGS AT THE FILL VALVE. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE OR EXPLOSION COULD RESULT. CORRECTION: SUSPECT VEHICLES WILL HAVE THE FILL AND OUTAGE HOSES REPLACED, AN IMPROVED SHIELD AND RUSTPROOFING APPLIED TO THE FITTINGS. |
|---|---|
| 1988172 | 1988-12-22. Suspension. On certain vehicles, the crossmember can become abnormally corroded at the lower control arm attachment. This could result in lower control arm separation and loss of vehicle control. Correction: crossmembers will be inspected and replaced if corrosion is excessive. Remainder will have crossmember retaining brackets installed. |
| 1982050 | 1982-05-28. INVOLVED VEHICLES MAY HAVE BEEN BUILT WITH IMPROPERLY FORGED OR HEAT TREATED BOLTS USED TO ATTACH THE FRONT SUSPENSION BALL JOINTS TO THE STEERING KNUCKLES. SOME OF THE BOLTS MAY EVENTUALLY FAIL WHICH COULD RESULT IN BALL JOINT SEPARATION AND AFFECT VEHICLE DIRECTIONAL CONTROLLABILITY. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.