Recalls that may apply to the 1983 Dodge 400
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 89V052000 | 1989-03-29. SUSPENSION:FRONT:CONTROL ARM:LOWER ARM. FRONT SUSPENSION CROSSMEMBER MAY CORRODE AND FAIL AT LOWER CONTROL ARM REAR PIVOT MOUNTS IF OPERATED WHERE SALT IS USED TO AID IN SNOW REMOVAL. Built 1980-08-01 to 1983-07-01. |
|---|---|
| 83V060000 | 1983-06-06. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS. LOCATION OF HYDRAULIC BRAKE TUBE TO BOTH REAR WHEELS CAUSES INTERFERENCE AND CHAFING BETWEEN THE TUBES AND REAR SUSPENSION TRAILING ARM PIVOT BRACKETS. Built 1983-05-01 to 1983-05-01. |
| 82V123000 | 1982-12-09. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS. HYDRAULIC BRAKE TUBING ROUTED TO THE LEFT REAR WHEEL BRAKE SYSTEM MAY HAVE BEEN BENT OUT OF SHAPE DURING ASSEMBLY AND COULD CHAFE AGAINST THE EXHAUST SYSTEM HANGER BOLT. Built 1982-08-01 to 1982-11-01. |
| 82V092000 | 1982-09-24. EQUIPMENT:ELECTRICAL. THE TRAVEL COMPUTER SYSTEM WIRING, ON THE INVOLVED VEHICLES, MAY BE IMPROPERLY CONNECTED. THIS CONDITION CAN CAUSE DAMAGE TO INTERNAL COMPONENTS. Built 1982-08-01 to 1982-09-01. |
| 82V085000 | 1982-09-09. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS. ON THE INVOLVED VEHICLES, IMPROPER ROUTING OF THE HYDRAULIC BRAKE TUBE COULD CAUSE IT TO CHAFE AGAINST THE PARK BRAKE CABLES. EVENTUALLY, THE BRAKE TUBE MAY FAIL AND BRAKE FLUID LEAKAGE MAY OCCUR. Built 1982-08-01 to 1982-08-01. |
| 1988172 | 1988-12-22. Suspension. On certain vehicles, the crossmember can become abnormally corroded at the lower control arm attachment. This could result in lower control arm separation and loss of vehicle control. Correction: crossmembers will be inspected and replaced if corrosion is excessive. Remainder will have crossmember retaining brackets installed. |
|---|---|
| 1983053 | 1983-06-06. Brakes. On certain vehicles, hydraulic brake tube routing to both rear wheels may allow interference between the tubes and the rear suspension trailing arm pivot brackets. Abrasion resulting from such interference may result in tube fatigue and partial loss of braking capability. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.