WenmarOpen by Wenmar Pro

Recalls that may apply to the 2000 Daewoo LANOS

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
04V3940002004-08-06. ENGINE AND ENGINE COOLING. ON CERTAIN PASSENGER VEHICLES, THE CAMSHAFT POSITION SENSOR MAY MELT RESULTING IN A BURNING SMELL AND VISIBLE SMOKE, WHICH MAY SUBSEQUENTLY LEAD TO THE MELTING OF THE CAMSHAFT COVER AND THE CAMSHAFT POSITION SENSOR WIRE HARNESS. Built 1997-03-09 to 2002-12-20.
04V3570002004-07-14. ENGINE AND ENGINE COOLING. ON CERTAIN PASSENGER VEHICLES, THE CAMSHAFT POSITION SENSOR MAY MELT RESULTING IN A BURNING SMELL AND VISIBLE SMOKE, WHICH MAY SUBSEQUENTLY LEAD TO THE MELTING OF THE CAMSHAFT COVER AND THE CAMSHAFT POSITION SENSOR WIRE HARNESS. Built 1997-10-19 to 2001-11-13.
02V1310022002-05-08. AIR BAGS. CERTAIN PASSENGER VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACT." Built 1997-12-09 to 2000-10-17.
02V1310012002-05-08. AIR BAGS. CERTAIN PASSENGER VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACT." Built 1997-10-19 to 2001-09-14.
01V0200002001-01-25. ELECTRICAL SYSTEM:WIRING. VEHICLE DESCRIPTION: PASSENGER VEHICLES. A WIRING HARNESS, LOCATED BENEATH THE CARPET IN THE FRONT PASSENGER FLOOR AREA, CAN BECOME DAMAGED BY PASSENGER TRAFFIC AS THE WIRE HARNESS IS RUBBED AGAINST A BODY SEAM IN THE FLOOR PANEL. Built 1999-12-15 to 2000-11-03.
99V3360011999-11-30. WHEELS:LUGS/NUTS/BOLTS/STUDS. VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH ALLOY WHEELS. THESE WHEELS WERE MANUFACTURED WITHOUT THE STEEL BUSHING INSERTS AROUND THE WHEEL BOLT OPENINGS, ALLOWING FRICTION BETWEEN THE WHEEL BOLT SEATS AND THE WHEEL BOLTS. THIS CAN RESULT IN THE BOLTS LOOSENING DURING HARD BRAKING. Built 1997-10-14 to 1999-09-28.
Canada: Transport Canada, as of 2026-10-19
20043502004-09-24. Engine. On certain vehicles, the camshaft position sensor may melt resulting in a burning smell and visible smoke, which may subsequently lead to the melting of the camshaft cover and camshaft position sensor wire harness. This could possibly cause an under hood fire. Correction: Dealers will replace the camshaft position sensor and install an additional fuse.
20021052002-06-03. Airbag. Certain passenger vehicles fail to conform to the requirements of CMVSS no. 201, "occupant protection in interior impact." In the event of a crash in which the air bags do not deploy, there is a possibility of increased head injury to the front seat passenger should contact with the passenger side air bag cover occur. Correction: Dealers will install new energy absorbing air bag mounting brackets.
20010732001-03-30. Electrical. On certain vehicles, the ECM wiring harness which is located in the passenger footwell area may chafe against a caulked body seam due to movement of the passenger's feet and result in a short circuit to ground. There is a possibility that engine driveablity may be affected and/or the engine may stall. Correction: Extra protection will be applied to the wiring harness and an additional tie strap will be installed to reroute the ECM harness away from the body seam.
20000212000-01-18. Suspension. On certain vehicles, insufficient wheel bolt torque could result in wheel separation and a possible crash without prior warning. Correction: Wheel bolt torque will be increased to 120nm (88lb/ft).

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.