WenmarOpen by Wenmar Pro

Service bulletins for the 2025 Chrysler Voyager

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

200 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
91006372025-08-06. Service bulletin. ELECTRICAL SYSTEM. Actions: Perform a check for the internal defect failure description or DTC B2232-00 Fault momentarily not present: If (fault frequency counter <= 3) then clear the fault code memory, do NOT exchange the ECU, retest. If frequency counter > 3 then check whether there are sources of potential EMI close to the installed position of the ECU that do not comply with the standard vehicle configuration. Test not OK: Eliminate the source of EMI, Test OK: Inspect the ECU for any damages like water intrusion/corrosion damage inside the ECU from water? Test not OK: Rectify the damage to the ECU, clear the fault code memory, no parts exchange, Test OK: Is there a repeat of the anomaly for the same fault manifestation (with any ECU exchange)? If No: Clear the fault code memory, in-depth fault search in the environment of the ECU + in-depth questions to the customer about the situations when the fault occurred? *ECU-exchange only when an external failure cause can be ruled out.* If Yes: Replace the ECU. If (fault momentarily present) or (repeated repair with the same fault) Program the ECU with the most recent SW, repeat the check for the fault. If the fault is no longer present... finished If the fault is still present... replace the ECU
S2422000001 REV.D2025-07-31. Service bulletin. ELECTRICAL SYSTEM. Tire Pressure Monitor (TPM) Service Information. TPM Lamp On.
S2208000138 REV.B2025-07-09. Service bulletin. ELECTRICAL SYSTEM. Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
91006162025-07-08. Service bulletin. ELECTRICAL SYSTEM. Telematics Box Module Verify Z part number availability. Order a Z part number for all Exchange Orders: Warranty, Mopar, customer pay and service contract. Order regular part number for New unsold units only.
S2408000072 REV.A2025-07-02. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Power Sliding Door Inoperative or Intermittently Will Not Open or Close
S25080000522025-07-02. Service bulletin. ELECTRICAL SYSTEM. Service Shifter Message on the Cluster and Shifter Unable to move Out of Park
91005992025-05-29. Service bulletin. ELECTRICAL SYSTEM. Underhood start/stop safety The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC): - P152E Engine -Hood Switch 2 Circuit High. - DTC P152F Customers may also experience: - Start/Stop system warning light. - Start/Stop inoperable. - Remote start inoperable. Diagnosis: - Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available in DealerCONNECT/Service Library, verify all related systems are functioning as designed. If DTCs or symptom conditions, other than the one listed are present, record the issues on the repair order and repair as necessary before proceeding further with this bulletin. - If any vehicle exhibits any of the symptoms listed above in the customer symptom section, perform the Repair Procedure. - Special Tools/Equipment: wiTECH or equivalent. Repair Procedure: 1. Open the hood and locate the hood switch 2. Push in on the two locking tabs and pull them out. 3. Disconnect the wire connector from the switch. 4. Connect the wires to the same hood switch. 5. Push the switch back into the hold until both lock tab are engaged. 6. Clear all DTCs that may have been set in any module during this repair procedure. 7. In case the P152F/P152E DTCs persist, repeat the procedure with a new/spare/known good switch and repeat steps 5 and 6. 8. Replace switch installed during previous step for the original switch of the vehicle. If DTCs P152F/P152E are not present, leave the original switch installed and do not document the change of the switch in the repair process/narrative.
S25230000492025-05-28. Service bulletin. ELECTRICAL SYSTEM. B2779-04 Vehicle Pedestrian Alert Module-System Internal Failures. Quiet Vehicle Pedestrian Module (QVPM) Sound Is Not OK. Discussion: If diagnostic trouble code (DTC) B2779–04 is present and or QVPM is inoperative or sound is not okay, before replacing the module please check first the following service instructions: Perform the BODY VERIFICATION TEST. (Refer to 28 - DTC-Based Diagnostics/MODULE, Body Control (BCM) - Standard Procedure).
S25080000392025-05-19. Service bulletin. ELECTRICAL SYSTEM. Universal Garage Door Opener (UGDO) Inoperative, LED Indicator Lamps Not Illuminating
S2323000002 REV.A2025-05-19. Service bulletin. ELECTRICAL SYSTEM. "Washer Light On And Will Not Turn Off After Adding Washer Solvent."
S2423000026 REV.A2025-05-19. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. Power Sliding Door Will Not Power Open And/Or Close Automatically.
S258A000016REVA2025-05-16. Service bulletin. ELECTRICAL SYSTEM. DVD/Blu-ray Not Syncing Between The Two Rear Screens.
S258A0000162025-05-14. Service bulletin. ELECTRICAL SYSTEM. DVD/Blu-ray Not Syncing Between The Two Rear Screens.
1044082025-05-13. Service bulletin. ELECTRICAL SYSTEM. RADIO - MULTI MEDIA
91005452025-05-07. Service bulletin. ELECTRICAL SYSTEM. "CLUSTER Instrument Panel Multiple cluster issues if misdiagnosed can lead to unnecessary IPC replacement. Tech Tip: Reset the IPC module first before any steps are taken to replace the module are undertaken. Connect Witech to the vehicle. Reset all DTCs and check for active DTCs warnings set against IPC. If battery low indicated against IPC, reset the module via WiTech tool. NOTE: After Battery Drainage, the IPC may not function correctly. Please follow the following steps before considering an IPC replacement: 1) Charge the Battery Ensure the battery is fully charged. 2) Soft Reset Perform a soft reset on the IPC. 3) Power-Up Issue 4) If the IPC does not power up, proceed with the following steps: a. Disconnect the battery. b. Reconnect the battery. 5) If condition still exists, consider IPC replacement."
91005692025-05-06. Service bulletin. ELECTRICAL SYSTEM. "Video Routing Module Verify Z part number availability. Order a Z part number for all Exchange Orders: Warranty, Mopar, customer pay and service contract. Order regular part number for New, Unsold units only. Please review the latest version of SOL S2208000030 regarding DVD/blue ray issues. After updating software perform resets on both display or concern may still appear. After Battery Drainage VRM do not work. Please follow the following steps. 1. Check VRM proxi, if the VRM is not aligned, perform proxi alignment, reset module. 2. If proxi is correct, reset module 3. Check for DTCs, and check wiring and components related to those DTCs and clear them."
S258A0000132025-04-17. Service bulletin. ELECTRICAL SYSTEM. AM Radio Static, With No Active or Stored Radio Antenna Diagnostic Trouble Codes (DTC).
S25080000262025-04-04. Service bulletin. ELECTRICAL SYSTEM. Tire Pressure Lamp Flashing, No Tire Pressures Displayed, “Tire Pressure Module (TPM) System Unavailable” Message Displayed on Cluster
S258A0000092025-03-07. Service bulletin. ELECTRICAL SYSTEM. Apple CarPlay Does Not Complete The First Initial Wireless Connection.
S2108000015 REV.J2025-02-26. Service bulletin. ELECTRICAL SYSTEM. Uconnect Box Require Service Message
91004992025-02-26. Service bulletin. ELECTRICAL SYSTEM. Touchscreen For ALL infotainment system repairs (touchscreens, radios, etc.), refurbished parts may be available. Follow the Infotainment Ordering guide available under the "Parts" section of Dealer Connect: DealerCONNECT> Parts> News& Information> Audio & Electronic Products Exchange Process
S258A0000042025-02-06. Service bulletin. ELECTRICAL SYSTEM. DVD Or Blu-Ray INOP, Rear Screens Or Monitors INOP, VRM Audio INOP, Mirroring INOP
91004452024-12-12. Service bulletin. ELECTRICAL SYSTEM. Power Transfer Unit If considering PTU Assembly replacement related to DTCs C14A7-97 or C1494-92, please be aware of updated diagnostic procedures in the service library which may indicate the smart actuator replacement (PN 68369691AD) is the proper repair.
S2223000036 REV.A2024-11-22. Service bulletin. ELECTRICAL SYSTEM. Reverse View Camera Inoperative After Recent Repair
91004472024-11-20. Service bulletin. ELECTRICAL SYSTEM. SWITCH Multifunction Before replacing the steering column control module (SCCM) due to DTC U0212 active, please follow these steps: 1.- Refer to service library procedure and follow diagnosis steps at BCM. 2.- If failure still present, make sure all the switches' and airbag's harness are properly connected and there is no corrosion or pinching, disconnect the switches & reconnect them, and reverify the issue. 3.- Verify if failure is still present, review if there is lack of communication between SCCM and BCM. For example, activate turn signals or wipers. 4.- Read at the BCM diagnosis session if BCM is receiving information from SCCM. Through diagnosis review if activation from wipers is requested, if turn signal, blindspot and lane assistant work. 5.- Do a hard reset to BCM and evaluate if any DTC is set. Retest if failure still present. If there are no DTC's, physical defects, wipers inop, nor turn signal inop, then SCCM does not need to be replaced Before replacing the steering column control module (SCCM) due to DTC U0212 active, please follow these steps: 1.- Refer to service library procedure and follow diagnosis steps at BCM. 2.- If failure still present, make sure all the switches' and airbag's harness are properly connected and there is no corrosion or pinching, disconnect the switches & reconnect them, and reverify the issue. 3.- Verify if failure is still present, review if there is lack of communication between SCCM and BCM. For example, activate turn signals or wipers. 4.- Read at the BCM diagnosis session if BCM is receiving information from SCCM. Through diagnosis review if activation from wipers is requested, if turn signal, blindspot and lane assistant work. 5.- Do a hard reset to BCM and evaluate if any DTC is set. Retest if failure still present. If there are no DTC's, physical defects, wipers inop, nor turn signal inop, then SCCM does not need to be replaced.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.