WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Chrysler Voyager

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

429 on file from NHTSA, as of 2026-10-19.

About U0140 on the 2022 Chrysler Voyager: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

Only bulletins with trouble code: U0140 are shown. Show all

Bulletins, newest first
08-170-262026-04-29. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Flash: Power Sliding Door Module (PSDM) System Updates Customers **must** experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle **must** exhibit/set the following Diagnostic Trouble Code (DTC): ● U0140-00 - Lost Communication With Body Control Module. Customers may also comment on one or more of the following: ● Left power sliding door inoperable. ● Right power sliding door inoperable. NOTE: **Doors will open manually** This bulletin involves **reprogramming the left PSDM (PSDML) and the right PSDM (PSDMR)** with the latest available software
08-170-242024-07-30. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. "Flash: Power Sliding Door Module (PSDM) System Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● U0140-00 - Lost Communication With Body Control Module. Customers may comment on one or more of the following: ● Left power sliding door inoperable. ● Right power sliding door inoperable. This bulletin involves updating the PDSM with the latest available software."
91002212023-12-18. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE. Body Control Module For concern related to DTC U0140 - Lost Communication with Body Control Module, please follow published diagnostic information for this DTC to ensure all module connections are secure. Please check all the connections at BCM from other modules that could potentially report a loss of communication with the BCM and ensure that they are fully seated as per diagnostic information. Some affected modules may include : HVAC-R, Radio, Amplifier (AMP) & Premium, HVAC, ORC, LBSS, RBSS, PCM, EPS, MSMP, AHLM, PTS/PAM, ICS, ESM, RF Hub, RCCC, MSMD, ANC, PLGM, PSDML, DMRL, DMRR, PSDMR, TBM, PDM(DMFL/R), DDM(DMFL/R), DTCM, OCM, ACC, FFCM, DSM, CVPM, VRM, SCCM, FSM, CSWM. *Ensure to check all the wiring harness connected to BCM with Other Modules are proper. *Please disconnect the Battery Negative Cable for 15 minutes and then reconnect. *Clear the codes and check to see if any active DTC's return for U0140 n *If still DTCs U0140 presents then contact Engineering Expert:FCA Redacted Content

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.