Recalls that may apply to the 2000 Chrysler Concorde
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 03V035000 | 2003-02-05. SEATS:FRONT ASSEMBLY:RECLINER. ON CERTAIN PASSENGER VEHICLES, SEAT BACK RECLINER BOLT BREAKAGE CAN OCCUR RESULTING IN THE SEAT BACK RECLINING UNEXPECTEDLY. Built 1997-09-01 to 2002-04-27. |
|---|---|
| 01V273000 | 2001-08-02. STRUCTURE:FRAME AND MEMBERS. VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES (NON-SUNROOF ONLY) FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACT." Built 1999-07-19 to 2001-06-29. |
| 00V366000 | 2000-11-09. CHILD SEAT. VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES, PICKUP TRUCKS AND SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 225, "CHILD RESTRAINT ANCHORAGE SYSTEMS." SOME OF THE OWNER'S MANUALS FOR THESE VEHICLES ARE MISSING INSTRUCTIONS THAT PROVIDE A STEP-BY-STEP PROCEDURE, INCLUDING DIAGRAMS, FOR PROPERLY ATTACHING A CHILD RESTRAINT SYSTEM'S TETHER STRAP TO THE TETHER ANCHORAGE. Built 1999-06-15 to 2000-10-31. |
| 00V180000 | 2000-07-10. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER. VEHICLE DESCRIPTION: NON-ABS EQUIPPED PASSENGER VEHICLES. THE BRAKE MASTER CYLINDER PISTON RETAINER SNAP RING MAY HAVE BEEN BENT INWARD DURING THE ASSEMBLY PROCESS. THE MASTER CYLINDER PISTON MAY BE IN A "BRAKE APPLIED" POSITION DUE TO THE DAMAGED PISTON RETAINER SNAP RING. WHEN THE PISTON IS IN THE APPLIED POSITION, THE FLUID COMPENSATION PORTS ARE CLOSED WHICH RESULTS IN A BRAKE DRAG CONDITION. Built 2000-06-20 to 2000-06-20. |
| 00V034000 | 2000-02-04. SEAT BELTS. VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE SEAT BELT SHOULDER HEIGHT ADJUSTABLE TURNING LOOP (ATL) TOP MOUNTING BOLT WAS INADEQUATELY MANUFACTURED. Built 1999-04-15 to 1999-08-17. |
| 00V033000 | 2000-02-04. SEAT BELTS:FRONT:RETRACTOR. VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE MOLDING FLASH ON THE PRIMARY LEVER MAY PREVENT THE OPERATION OF THE G-LOCK AND TILT LOCK FUNCTIONS ON SOME OF THE DRIVER'S SIDE RETRACTORS. Built 1999-10-15 to 1999-10-31. |
| 99V343000 | 1999-12-02. AIR BAGS:FRONTAL. VEHICLE DESCRIPTION: PASSENGER AND SPORT UTILITY VEHICLES. THE PASSENGER AIR BAG INFLATOR ASSEMBLY CONTAINS AN INCORRECT INFLATOR CHARGE AMOUNT. Built 1999-10-30 to 1999-11-08. |
| 2003035 | 2003-02-14. Seats And Restraints. On certain vehicles, the driver seat recliner bolts could break which would allow the seat back to recline unexpectedly while the vehicle is in motion. Correction: Dealer will replace the recliner bolts with new shoulder bolt and, for vehicles with power driver seats built through January 2000, the recliner tracks will be realigned and a longer recliner driveshaft will be installed to prevent disengagement. |
|---|---|
| 2000164 | 2000-08-15. Brakes. On certain vehicles, the brake master cylinder piston retainer snap ring may have been bent inward during the assembly process. The master cylinder piston may be in the "brake applied" position due to the damaged snap ring. When the piston is in the applied position, the fluid compensation ports are closed which results in a brake drag condition which could cause brake system overheating, brake fade and increased stopping distance. Correction: Master cylinder will be replaced. |
| 2000045 | 2000-02-28. Seats And Restraints. On certain vehicles, the adjustable turning loop on the shoulder belt top mounting bolt may have been manufactured with a core hardness that exceeds the specification for this type of application. Due to the excessive core hardness, these mounting bolts may not withstand the force required to function properly in certain impact situations, increasing the risk of injury to a belted occupant. Correction: The upper adjustable turning loop bolt will be replaced with a bolt of proper hardness. |
| 2000044 | 2000-02-28. Seats And Restraints. On certain vehicles, the molding flash on the primary lever may prevent operation of the deceleration lock and tilt lock functions of the driver's side retractor. If this should occur in a frontal crash situation, driver protection from the seat belt may be reduced, increasing the risk of injury. Correction: Left front retractor assemblies will be replaced on affected vehicles. |
| 2000013 | 2000-01-14. Seats And Restraints. On certain vehicles, the passenger side air bag inflator assembly contains an incorrect inflator charge. This condition could increase the risk of a passenger occupant injury in the event of a crash. Correction: Passenger air bag modules will be replaced. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.