WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Chrysler 200

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

215 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
02-007-122022-07-25. Service bulletin. STEERING; WHEELS; SUSPENSION:FRONT. Steering Wheel Off Center 3.1 To 12 Degrees This bulletin involves centering the vehicles steering wheel. Steering wheel off center 3.1 to 12 degrees.
21-013-122022-07-25. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Transmission Shift Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. This PCM software enhancement improves how the shifts are controlled during upshifts (torque management).
07-004-12 REV. A2022-07-25. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. Attention! Release Of New Engine Coolant Organic Additive Technology (OAT) Chrysler Corporation LLC. has released a new engine coolant for the 2013 model year vehicles and beyond, for all engine applications except the ones listed in the note above. This new coolant is an Organic Additive Technology (OAT) (Fig. 1). OAT coolants have a service interval of 10 years or 150,000 miles. For heavy duty truck and extreme duty cycle applications refer to the Service Information or Owner's Manual for proper maintenance schedules.
18050162022-07-05. Service bulletin. POWER TRAIN. Powertrain Diagnostic And System Enhancements.
90043302022-05-31. Service bulletin. POWER TRAIN; EQUIPMENT. PLATE, TORQUE CONVERTER DRIVE For 3.6L with 62TE NOTE: FOR ALL PROMASTER VF 3.6L/62TE EQUIPPED VEHICLES: IF THE TRANSMISSION BRACKET TO THE TRANSMISSION CASE FASTENERS ARE REMOVED DURING SERVICING, THE FASTENERS Part Number 06511385A$ ARE ONE TIME USEAGE & MUST BE REPLACED & PROPERLY TORQUED TO 105NM Replace the eight bolts 8 06503465 drive plate to crank shaft and the four TC bolts 06504383 as they have sealants Vehicle miles < 30K: Mandatory replacement of transmission and driveplate Vehicle miles > 30K: Replace driveplate only shot peened
90042062022-05-31. Service bulletin. STRUCTURE; PARKING BRAKE; POWER TRAIN. Remanufactured Transmission Assembly 1. All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year - Only use R8210327A$ for 2014 - 2018 VF. - Only use R8453637A$ for 2019 VF. - Only use R8599680AA for 2020/1VF. Installing a R8453637A$ or R8599680A$ in a 2014-18 VF will result in a 2014-18 MY core being returned. Mopar can no longer convert 2014-18 VF 62TE core to the 2019-21 version. Continued mis-usage will result in a core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.
Z5091195A$2022-04-04. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT:BLUETOOTH/WIFI. RES / RHA / REB radio that supports Bluetooth and Hands-Free
R8149638A$2022-04-04. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION. 8-speed transmission
R2108213A$2022-04-04. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE. W5A580 (NAG1) Valve Body - complete
D-16-032022-04-04. Service bulletin. ENGINE. Can/Am Warranty coverage
S21210000052021-05-24. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. 62TE 6-Speed Transmission Cracked Torque Converter (TC) Piston Repair Index, To Aid In Diagnosis And Repair
90042062021-05-24. Service bulletin. STRUCTURE; PARKING BRAKE; POWER TRAIN. Remanufactured Transmission Assembly 1. All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 3. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 4. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.
90033572021-04-26. Service bulletin. ENGINE AND ENGINE COOLING. ADAPTER, Engine Oil Filter (Pentastar V6) All vehicles equipped with a 3.2L or 3.6L except for model year 2014 vehicles with leak concern: 1) Ensure the Oil Filter Adapter (OFA) Cap O-ring is seated in the proper groove in the cap and not damaged or cut. 2) If replacing the (OFA) due to a leak detected between (OFA) and block. Ensure the torque on the 5 bolts are torqued to 12nm. If not record the actual values, torque to 12nm and contact the FCA employees listed below. 3) Remove the (OFA) and replace the O-ring and gaskets only (Kit #68191356A$), NOT THE OFA. 4) If oil was drained, add oil dye to ensure the leak is repaired. For model year 2014 vehicles replace the Oil Filter Adaptor. 5) When replacing PN's 68310865A$ & 68308741A$, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
90028202021-03-29. Service bulletin. ENGINE AND ENGINE COOLING. 68027057AA - Convertible Top Tonneau Cover Motor Assembly Prior to replacing this part, please remove the trim on the decklid and ensure the connection on the back of motor is fully seated by performing a push/pull test. If not fully seated, please engage the connection, then retest the convertible top function.
782021-03-22. Service bulletin. SEAT BELTS. STAR Center News No. 78 - Jan/Feb 2013: Instead of limiting the use of the tether anchor to 48 pounds (child weight) the new guideline states that the tether anchor can be used with a seatbelt to install a child restraint up to the recommended weight limit of the child restraint.
90028202021-03-22. Service bulletin. ENGINE AND ENGINE COOLING. Convertible Top Tonneau Cover Motor Assembly Prior to replacing this part, please remove the trim on the decklid and ensure the connection on the back of motor is fully seated by performing a push/pull test. If not fully seated, please engage the connection, then retest the convertible top function.
710552021-03-01. Service bulletin. SEATS:FRONT ASSEMBLY:HEAD RESTRAINT. Warranty Bulletin D-20-16 (X84) Active Head Restraint - Select 2012-2018 Dodge Journey (JC) and 2012-2014 Dodge Avenger/Chrysler 200 (JS) (Rev. B)
703162020-12-28. Service bulletin. SEATS:MID/REAR ASSEMBLY:HEAD RESTRAINT. Warranty Bulletin D-20-16 (X84) Active Head Restraint - Select 2012-2018 Dodge Journey (JC) and 2012-2014 Dodge Avenger/Chrysler 200 (JS) (Rev. A)
699122020-12-28. Service bulletin. SEATS:MID/REAR ASSEMBLY:HEAD RESTRAINT. Warranty Bulletin D-20-16 (X84) Active Head Restraint - Select 2010-2018 Dodge Journey (JC) and 2010-2014 Dodge Avenger/Chrysler 200 (JS)
703162020-12-21. Service bulletin. SEATS:MID/REAR ASSEMBLY:HEAD RESTRAINT; SEATS:FRONT ASSEMBLY:HEAD RESTRAINT. Warranty Bulletin D-20-16 (X84) Active Head Restraint - Select 2012-2018 Dodge Journey (JC) and 2012-2014 Dodge Avenger/Chrysler 200 (JS) (Rev. A)
699122020-12-21. Service bulletin. EQUIPMENT; SEATS:FRONT ASSEMBLY:HEAD RESTRAINT; SEATS:MID/REAR ASSEMBLY:HEAD RESTRAINT. Warranty Bulletin D-20-16 (X84) Active Head Restraint - Select 2010-2018 Dodge Journey (JC) and 2010-2014 Dodge Avenger/Chrysler 200 (JS)
31-002-202020-11-30. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair This bulletin involves inspecting and if necessary removing corrosion and refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
S1121000006 Rev.2020-09-28. Service bulletin. ELECTRICAL SYSTEM; ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION. (Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
90042682020-07-27. Service bulletin. ENGINE. THROTTLE BODY For clarification, only use 68414676A$ on 2010 & earlier vehicles as supply is limited.
90042062020-06-22. Service bulletin. POWER TRAIN; ENGINE. Remanufactured Transmission Assembly 1. All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 3. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 4. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.