WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Chevrolet Volt

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1171 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
PIC6190A2018-12-17. Service bulletin. EQUIPMENT; STRUCTURE. This Preliminary Information communication advises the technician on cardboard shell that is found in the vehicle during Pre-Delivery Inspection. When performing a pre-delivery inspection you may find a piece of foam that is surrounded by a cardboard shell that is found in the vehicle during Pre-Delivery Inspection.
99-08-51-001D2018-06-11. Service bulletin. STRUCTURE; EQUIPMENT. Thins informational bulletin provides information on Paint-less Dent Repair Process.
060089026N2018-06-04. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE:BODY:DOOR; POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); VISIBILITY:WINDSHIELD; ELECTRONIC STABILITY CONTROL (ESC). This warranty bulletin provides labor operation numbers for customer concerns that cant be duplicated.
06-08-64-001D2018-05-21. Service bulletin. VISIBILITY:GLASS, SIDE/REAR; STRUCTURE:BODY:DOOR. This Informational bulletin describes warranty part reviews where door glass had chips or scratches.
PI0281G2018-05-21. Service bulletin. STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS. This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
16-NA-0622017-08-31. Service bulletin. STRUCTURE. This technical bulletin provides a procedure to Install Foam Between Charge Port Housing and Door Switch Retaining Tang to correct a conditon of CHARGE DOOR OPEN Message Displayed with Charge Port Door Closed
16-NA-3962017-08-31. Service bulletin. STRUCTURE:BODY:DOOR; ELECTRICAL SYSTEM. This technical bulletin provides a procedure to replace the RCDLR for vehicles with multiple concerns regarding the door remote controls and TPM sensors due to an internal concern within the RCDLR.
16-NA-3952017-08-15. Service bulletin. STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS; STRUCTURE:BODY:DOOR. This informational bulletin provides information for technicians that upon removal of a front door trim panel, two high retention retainers will break but must be replaced with same high retention retainers to properly secure the door trim.
PIC61902016-10-26. Service bulletin. STRUCTURE; EQUIPMENT. THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN ON A FOAM AND CARDBOARD SHELL THAT IS FOUND IN THE VEHICLE DURING PRE-DELIVERY INSPECTION. WHEN PERFORMING A PRE-DELIVERY INSPECTION YOU MAY FIND A PIECE OF FOAM THAT IS SURROUNDED BY A CARDBOARD SHELL. THE COMMUNICATION PROVIDES INSTRUCTION TO PLACE THE FOAM AND CARDBOARD SHELL IN THE TIRE INFLATOR KIT.
16NA2732016-10-18. Service bulletin. STRUCTURE:BODY:DOOR; EQUIPMENT. THIS TECHNICAL PROVIDES A PROCEDURE TO CHECK THE REAR DOORS FOR LOOSE OR OVER TIGHTENED CABLES THAT MAY CAUSE THE CUSTOMERS CONCERN OF THE REAR DOORS WONT OPEN.
PIC-5779-G2016-08-26. Service bulletin. STRUCTURE; EQUIPMENT. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES THE TECHNICIAN WITH INFORMATION ON THE PROPER WASHING OF THE BRIGHT ALUMINUM MOLDINGS TO AVOID THE MOLDINGS FROM GETTING DAMAGED. IT IS RECOMMENDED THAT A NON-ALKALINE SOLUTION BE USED FOR PREPARATION & WASHING OF THE BRIGHT ALUMINUM MOLDINGS.
PIC-61902016-08-11. Service bulletin. STRUCTURE:BODY:TRUNK LID; STRUCTURE:FRAME AND MEMBERS. THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN ON A FOAM AND CARDBOARD SHELL THAT IS FOUND IN THE VEHICLE DURING PRE-DELIVERY INSPECTION. WHEN PERFORMING A PRE-DELIVERY INSPECTION YOU MAY FIND A PIECE OF FOAM THAT IS SURROUNDED BY A CARDBOARD SHELL. THE COMMUNICATION PROVIDES INSTRUCTION TO PLACE THE FOAM AND CARDBOARD SHELL IN THE TIRE INFLATOR KIT.
PIC-5260-A2016-08-11. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM; VISIBILITY:SUN/MOON ROOF ASSEMBLY. THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THE STEPS ON DIAGNOSING THE CONCERN. VEHICLE'S SUNROOF OPERATION INTERMITTENT, BIND, NOISE, AUTO-REVERSE, AND/OR WATER LEAKS.
SB-16-NA-1362016-08-10. Service bulletin. STRUCTURE:BODY. THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPLACE THE FRONT FUEL FEED HOSE TO CORRECT A CUSTOMER CONCERN ON SMELLING FUEL OR AN ODOR COMING IN THROUGH THE VENTS WHILE THE ENGINE IS RUNNING DUE TO FUEL VAPOR ESCAPING FROM THE FRONT FUEL FEED HOSE.
PI-0281-E2016-08-06. Service bulletin. EQUIPMENT; STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS. THIS PRELIMINARY INFORMATIONAL BULLETIN PROVIDES INFORMATION THAT MAY BE HELPFUL WHEN ADDRESSING UNDERBODY COMPONENT CORROSION WITH CUSTOMERS.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.