WenmarOpen by Wenmar Pro

Service bulletins for the 2011 Chevrolet Volt

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1715 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
010601011K2019-11-25. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
PIP5540E2019-11-12. Service bulletin. ENGINE. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
070601016F2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
000601026M2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
16NA3832019-07-01. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. This informational bulletin advises of a new fuel injection kit used for decarbonizing the intake valves, and explains how toptier fuels should be used to reduce carbon build up.
PIP56402019-06-10. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with an automatic transmission.
PIP5226C2019-06-10. Service bulletin. EQUIPMENT; ENGINE. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
PIP4891H2019-06-03. Service bulletin. ENGINE; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Code P0497 stored. Technician will inspect all Evaporative Emissions System components and replace any component that is saturated with liquid fuel. Also Evaporative Emissions System lines should be blown out. Insure the customer is aware that over filling the fuel tank may lead to a repeat concern.
PIP4870D2019-06-03. Service bulletin. ENGINE; ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that may have a engine noise is sometimes louder than expected. Also will explain the known normal and abnormal reasons why the engine may be louder. When the vehicle speed is between 25-50 miles per hour the road noise does not mask the engine noise this is considered normal. When the vehicle is first started for the day the system will perform a catalyst preconditioning for about a minute. At this time the engine will seem louder than normal, this is normal. At times the engine often runs at wide open throttle, but at a reduced speed. This sound is uncharacteristic of a four-cylinder engine in a traditional sedan, but is a characteristic of an extended range electric vehicle such as the Chevrolet Volt. Technician will be able to inspect for abnormal induction ground-out conditions. These locations should be checked lower rubber isolator on air box not installed correctly or missing, upper induction resonator cover not installed properly, refrigerant line not bolted to engine support bracket, and throttle body contacting coolant pipes behind it. Abnormal exhaust ground-out conditions should also be inspected. These locations are at the exhaust clamp rearward of the second catalytic converter is contacting the battery heat shield, exhaust resonator underbody is contacting the heat shield. Repair any abnormal issue found.
070601016D2019-05-13. Service bulletin. ENGINE. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
000601012H2019-05-13. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
19NA0442019-04-22. Service bulletin. ENGINE. This informational bulletin provides information on a normal engine operating condition for faster emission warm up time.
PIP4869F2019-04-08. Service bulletin. ENGINE; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. This Preliminary Information communication provides information to the technician about vehicles that display a ?Propulsion Power is Reduced? in the Driver Information Center when driving in the mountains. Dealer should advise the customer the vehicle should be placed in Mountain Mode on the vehicle when the vehicle has a full charge if their travel plans involve mountainous driving before the next charge event.
PIP4869E2019-04-08. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE. This Preliminary Information communication provides information to the technician about vehicles that display a ?Propulsion Power is Reduced? in the Driver Information Center when driving in the mountains. Dealer should advise the customer the vehicle should be placed in Mountain Mode on the vehicle when the vehicle has a full charge if their travel plans involve mountainous driving before the next charge event.
PIP4859E2019-04-08. Service bulletin. FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM:12V/24V/48V BATTERY; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician on the steps to vacuum fill to ensure the cooling system is properly filled. Technician will need to use special tool GE-47716 Vac-N-Fill Coolant Refill Tool. Technician will also perform Hybrid/EV Battery Pack Coolant Pump Bleed Procedure in the GDS2 tool. After performing the GDS2 coolant bleed procedure drive vehicle for approximately 5 miles in a slalom type of situation to purge any remaining air from battery pack cooling plates.
PIC5650F2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
PIP5540B2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP4925B2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. This preliminary information document communicates a tip on the way to diagnose possible induction or exhaust air leaks using the evaporative emission cart smoke machine and ultrasonic leak detector tools.
PIP5540D2019-03-11. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP56282019-03-11. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
PIP5222A2018-11-13. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about the difficulty in detecting internal combustion engine misfires with a fully charged high voltage battery. Technician should ensure that the high voltage battery charge indicator is showing at least 2 bars below fully charged whenever performing strategy based diagnostics related to misfire.
PIP5163D2018-09-17. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
00-06-01-012E2018-06-11. Service bulletin. ENGINE; EQUIPMENT. This information bulletin provides the technician the information on how to properly clean a metal surface using the correct tool.
00-06-01-026J2018-06-11. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on Intake Manifold Inspection/Replacement After Severe Internal Engine Damage.
PI13942018-06-04. Service bulletin. ENGINE AND ENGINE COOLING. This preliminary informational bulletin provides technicians an engine repair tip for installation of pistons.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.