WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Chevrolet Silverado

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

2229 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
21-NA-1132022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. This technical bulletin provides a procedure to perform a learn procedure for the turbo actuator.
20-NA-0902022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides a way for the technician to identify if the ECM has been modified.
19-NA-1872022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides additional information on how to graph a cylinder misfire and a possible diagnostic cause.
18-NA-1502022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on 6.6L Duramax Possible Oil Leak Path Information.
18-NA-0982022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information for the technicians on where to look on the Duramax engine for coolant leaks.
18-NA-0112022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. Informational bulletin explaining how a plow may cause overheating and engine damage when traveling over 45 mph.
17-NA-3742022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin advises the technician of how the Soot information has changed from grams to percentage.
16-NA-3762022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on higher than expected oil consumption.
16-NA-3722022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides information on common diesel engine tick noises and how they are considered part of normal operation and no parts should be replaced for these normal operating conditions.
16-NA-2222022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
00-06-01-026P2022-09-30. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
22-NA-1762022-09-19. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This technical bulletin provides information on a possible bolt and guide pin that may be missing from the control valve which will need to be installed to correct the repair.
20-NA-0652022-09-07. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set.
19-NA-0442022-08-29. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE. This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
22-NA-0802022-08-03. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR. This technical bulletin provides a procedure to replace the camshaft actuator magnet to correct customer concerns of engine related shudder.
PIP5212D2022-07-25. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that have run hot and or has a tick noise. Technician should inspect the head gaskets to ensure are not installed backwards. Technician should replace the head gasket if they are found installed backwards.
PIT5448H2022-07-25. Service bulletin. ENGINE. This Preliminary Information communication advises the technician with a tip when the vehicle stops running after it has been idling for 2.5 hours. This is normal operation of the vehicle built with regular production code BTM and without Regular Production Option Code AVF. If the vehicle was built with regular production code BTM and AVF only has a 1 hour idle time.
19-NA-2182022-07-20. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides a service procedure to correct a condition of a Ticking Noise from the Engine.
12-01-37-001F2022-07-12. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. This service bulletin provides information to dealership personnel on a new refrigerant (R1234yf) for A/C service.
22-NA-1152022-07-12. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention.
22-NA-0092022-07-01. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
DCS59992022-06-27. Service bulletin. ENGINE AND ENGINE COOLING. Heater Outlet Pipe ? Population Revised
N2123454402022-06-27. Service bulletin. ENGINE AND ENGINE COOLING. Heater Outlet Pipe ? Population Revised
21-NA-0772022-06-25. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. This informational bulletin provides information for dealers/technicians on Aero Shutter Related Diagnostic Codes.
22NA0252022-06-21. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR. This technical bulletin provides a procedure to check and repair the balancer if found contacting the front cover.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.