Service bulletins for the 2014 Chevrolet Malibu
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
1738 on file from NHTSA, as of 2026-10-19.
About P0300 on the 2014 Chevrolet Malibu: what the code means, and the bulletins and recalls about the same components.
By type
By component
By trouble code
By topic
Only bulletins with trouble code: P0300 are shown. Show all
| PIP5628G | 2023-09-18. Service bulletin. ENGINE. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D |
|---|---|
| PIP5628F | 2023-05-15. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D |
| PIP5628E | 2023-03-13. Service bulletin. EQUIPMENT:ELECTRICAL:ACCESSORY GENERATOR:OUTLETS/RECEPTACLE. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D |
| PIP5628E | 2022-01-24. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D |
| PIP5628C | 2020-11-16. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D |
| PIP5628B | 2020-06-15. Service bulletin. ENGINE. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D |
| PI1178F | 2019-03-25. Service bulletin. ENGINE AND ENGINE COOLING. This preliminary informational bulletin provides repair information for a customer concern of an engine runs rough with the Check Engine Light (CEL) on/low compression on cylinder with misfire. A technician may find DTC P0300 set. |
| PIP5628 | 2019-03-11. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D |
| PIP5255A | 2018-11-13. Service bulletin. EQUIPMENT; ENGINE. This Preliminary Information communication provides information to the technician about vehicles that may have an external oil leak and/or diagnostic trouble code P16D0 P0300 after the cylinder head was replaced. If there is an external leak, verify the oil galley plugs 5 and 6 are installed. If diagnostic trouble code(s) P16D0 and / or P0300 sets, verify oil galley plug 10 has been installed. |
| PIP3333C | 2018-05-07. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent engine misfire and a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0300, P0301, and/or P0304. Technician will need to follow published Service Information diagnostics first. If the Service Information diagnostics do not isolate a cause for this concern, inspect the inside of the fuel rail and/or fuel tank for fuel contamination. f fuel contamination is present, refer to the "Fuel System Cleaning" procedure in Service Information. Dealer will need to advise the customer to only use fuel from high quality high volume Top Tier fuel stations. |
| PIP5167 | 2017-08-15. Service bulletin. ENGINE; POWER TRAIN. This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code P0300. Technician may find Diagnostic Trouble Codes P0011 and or P0014 set in the Engine Control Module. Technician will need to remove the camshaft solenoids and inspect the screens for debris. Technician will need to clean off the screens with brake cleaner if debris is present. If code resets or the screen did not have debris on them, remove the camshaft actuator associated with the Diagnostic Trouble Codes and with light air pressure, blow out the oil passages through the camshaft actuator solenoid port. Lubricate the camshaft solenoid seal(s) with clean engine oil and reinstall and install a new camshaft actuator associated with the Diagnostic Trouble Code. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.