WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Chevrolet Impala

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

2029 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
18NA3582019-11-25. Service bulletin. STRUCTURE. This technical bulletin provides a procedure to replace the upper and lower valve body housings to correct the customer concern of launch shudder.
PIC5779K2019-08-12. Service bulletin. STRUCTURE. This Preliminary Information communication provides the technician with information on the proper washing of the bright aluminum moldings to avoid the moldings from getting damaged. It is recommended that a non-alkaline solution be used for preparation & washing of the bright aluminum moldings.
N1720970602019-05-20. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM; VISIBILITY. N172097060 - Special Coverage Adjustment. Certain vehicles may have a condition where the Side Blind Zone Alert (SBZA) modules may fail or malfunction due to water intrusion. The driver may experience a side blind zone alert message displayed on the driver instrument cluster (DIC). If this message is ignored, the condition could result in the corruption of LS GMLAN that may result in the loss of some driver interface functions such as cluster, infotainment / displays, chime, and passenger presence detection (passenger airbag could be suppressed, w/airbag TT, DIC message). Dealers are to repair the vehicle by ordering and installing the appropriate service kit. The service kit will contain all of the components required to complete the repair. The repairs will be made at no charge to the customer.
PIE0463A2019-03-25. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE. This engineering information PI ends the need for information from the field on vehicles that have the condition of Smoke or Burning Odor from Underhood with Malfunction Indicator Lamp Illuminated with DTC P305F or P058D.
PIC5822F2018-12-17. Service bulletin. EQUIPMENT; STRUCTURE. This Preliminary Information communication provides the technician with the steps to diagnose and repair the concern of mildew odor or water on front floor on either side of the vehicle. Technician will gain access to the front wheelhouse of the affected side. The front wheel house flange may have a void in the sealer causing water to leak through and accumulate on the floor or wet carpet will be found. A thumb grade sealer will need to be placed in the void to prevent the water leak into the cabin.
99-08-51-001D2018-06-11. Service bulletin. STRUCTURE; EQUIPMENT. Thins informational bulletin provides information on Paint-less Dent Repair Process.
060089026N2018-06-04. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE:BODY:DOOR; POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); VISIBILITY:WINDSHIELD; ELECTRONIC STABILITY CONTROL (ESC). This warranty bulletin provides labor operation numbers for customer concerns that cant be duplicated.
11-00-89-007C2018-06-04. Service bulletin. STRUCTURE:BODY; EQUIPMENT. This informational bulletin is a revision for 11-00-89-007B to add the 2014 model year and update the Labor Operation List.
01-08-51-003E2018-05-21. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE. This informational bulletin provides recommendations and product information for application of anti-corrosion materials
06-08-64-001D2018-05-21. Service bulletin. VISIBILITY:GLASS, SIDE/REAR; STRUCTURE:BODY:DOOR. This Informational bulletin describes warranty part reviews where door glass had chips or scratches.
PI0281G2018-05-21. Service bulletin. STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS. This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
PIC5822E2018-05-21. Service bulletin. STRUCTURE. This Preliminary Information communication provides the technician with the steps to diagnose and repair the concern of mildew odor or water on front floor on either side of the vehicle. Technician will gain access to the front wheelhouse of the affected side. The front wheel house flange may have a void in the sealer causing water to leak through and accumulate on the floor or wet carpet will be found. A thumb grade sealer will need to be placed in the void to prevent the water leak into the cabin.
02-07-30-029Y2017-12-22. Service bulletin. STRUCTURE. This informational bulletin provides information on the PQC assembly replacement process - for dealers required to contact PQC prior to replacing an assembly (U.S. and Canada only).
PI12702017-12-22. Service bulletin. STRUCTURE. This preliminary provides a procedure to repair the rear closure applique if found to be cracked by the brass insert.
PIC5822D2017-11-14. Service bulletin. STRUCTURE:BODY. This Preliminary Information communication provides the technician with the steps to diagnose and repair the concern of mildew odor or water on front floor on either side of the vehicle. Technician will gain access to the front wheelhouse of the affected side. The front wheel house flange may have a void in the sealer causing water to leak through and accumulate on the floor or wet carpet will be found. A thumb grade sealer will need to be placed in the void to prevent the water leak into the cabin.
PIP4495E2017-11-14. Service bulletin. STRUCTURE:BODY:HOOD. This Preliminary Information communication provides information to the technician about vehicles that have a loud tick or rattle noise under the hood at all operating conditions. Technician will need to check the lower and oil pressure to the upper end oil pressure. Technician will need to inspect the oil feed orifice in the cylinder head. Technician will clean out and debris found in the orifice.
PIP53382017-08-15. Service bulletin. SUSPENSION; STRUCTURE:FRAME AND MEMBERS. This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include ?Vibration? ?Business Associate Code? and the last 8 of the Vehicle Identification Number.
PIC59082017-08-15. Service bulletin. STRUCTURE:BODY:TRUNK LID; STRUCTURE. This Preliminary Information communication provides information to the technician about vehicles that have a trunk open without having requested the trunk to open. Technician will contact Techline Customer Support Center for a Vehicle Configuration Index number for the Body Control Module.
PIC5822A2017-08-15. Service bulletin. STRUCTURE:FRAME AND MEMBERS; WHEELS; STRUCTURE:BODY. This Preliminary Information communication provides the technician with the steps to diagnose and repair the concern of mildew odor or water on front floor on either side of the vehicle. Technician will gain access to the front wheelhouse of the affected side. The front wheel house flange may have a void in the sealer causing water to leak through and accumulate on the floor or wet carpet will be found. A thumb grade sealer will need to be placed in the void to prevent the water leak into the cabin.
PIC5870A2017-08-15. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles with radio speakers have poor audio quality, buzz, pop, static type noise or no audio. Technician should inspect the trunk mounted radio amplifier for any signs of moisture. Technician will need to Replace the amplifier if water is present and replace any terminals that have corrosion. Also water test the trunk, sunroof, back glass and roof areas. Technician will need to fix any water leaks and clean out all drain tubes.
PIC58842017-08-15. Service bulletin. STRUCTURE:BODY:TRUNK LID. This Preliminary Information communication provides information to the technician about vehicles that have trunk lid does not self-raise to the full upright position when released. Technician will need to ensure the trunk lift springs are in the rear-most position.
PIC5779C2017-08-15. Service bulletin. STRUCTURE:BODY. This Preliminary Information communication provides the technician with information on the proper washing of the bright aluminum moldings to avoid the moldings from getting damaged. It is recommended that a non-alkaline solution be used for preparation & washing of the bright aluminum moldings.
05-08-51-001H2017-08-15. Service bulletin. STRUCTURE:BODY. This informational bulletin provides information on removing paint stains on the under side of protective shipping film
PIC5884B2017-08-15. Service bulletin. STRUCTURE:BODY:HATCHBACK/LIFTGATE. This Preliminary Information communication provides information to the technician about vehicles that have trunk lid does not self-raise to the full upright position when released. Technician will need to ensure the trunk lift springs are in the rear-most position.
PIC5541B2017-08-15. Service bulletin. SUSPENSION; STRUCTURE:BODY:BUMPERS. This Preliminary Information communication provides information to the technician about a rattle coming from the rear of the vehicle when driving over medium sized bumps, it may sound like a loose spare tire or suspension component. The noise is most likely the left and right retaining clips holding the midsections of the parking brake cables to the car. The rattle can be repaired by preloading the cables using the published parking brake adjustment procedure found in service information.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.