Recalls that may apply to the 2000 Chevrolet Cavalier
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 04V036000 | 2004-01-27. ELECTRICAL SYSTEM:IGNITION:SWITCH. ON CERTAIN PASSENGER VEHICLES. IF THE ENGINE FAILS TO START AND THE DRIVER HOLDS THE KEY IN THE "START" POSITION FOR AN EXTENDED PERIOD, HIGH CURRENT FLOWS THROUGH THE IGNITION SWITCH, AND SOMETIMES PRODUCES ENOUGH HEAT TO MELT INTERNAL SWITCH PARTS. Built 1999-02-01 to 2000-06-30. |
|---|---|
| 00V201000 | 2000-07-20. INTERIOR LIGHTING. VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH THE BI-FUEL OPTION FAIL TO COMPLY WITH FMVSS NO. 101, "CONTROL LOCATION, IDENTIFICATION, AND ILLUMINATION." THE INSTRUMENT PANEL LIGHTS IN THESE VEHICLES ARE AT FULL ILLUMINATION LEVELS AND CANNOT BE ADJUSTED. THE STANDARD REQUIRES AT LEAST TWO LEVELS OF ILLUMINATION. Built 1999-07-01 to 1999-11-30. |
| 2004033 | 2004-01-28. Electrical. On certain vehicles, if the engine fails to start and the driver holds the key in the "Start" position for an extended period, high current flowing through the ignition switch may produces enough heat to melt internal switch parts. If the switch is damaged, a fire could occur in the steering column, even with the engine off and the key removed. Correction: Dealer will install a relay kit to prevent high current from flowing through the ignition switch. |
|---|---|
| 2001096 | 2001-04-17. Lights And Instruments. Certain vehicles do not comply with the requirements of CMVSS 101- Location and Identification of Controls and Displays. Vehicles exhibit a condition in which the "Generator Low Voltage" indicator light will not illuminate under low voltage conditions. Correction: Dealers will reflash the vehicle PCM with new calibration software. |
| 1999155 | 1999-08-19. Lights And Instruments. Certain vehicles may not comply with the requirements of CMVSS 101 - Control Location and Identification. The instrument panel backlighting may not function after adjusting the interior light intensity. If the instrument panel is not lit at night, the driver may not be able to see the controls and displays. Correction: Dealers will test the body control module (BCM) for the condition, and if necessary, replace the BCM. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.