WenmarOpen by Wenmar Pro

Service bulletins for the 2018 Cadillac CT6

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1096 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Equipment and accessories are shown. Show all

Bulletins, newest first
990089019R2019-08-19. Service bulletin. EQUIPMENT. This informational bulletin provides process information for the (GWM) and (WPC) parts return program.
N192211740 022019-08-19. Service bulletin. VEHICLE SPEED CONTROL:CRUISE CONTROL; EQUIPMENT. Customer Satisfaction Program (revised service procedure and warranty information). General Motors is expanding the mileage of Super Cruise enabled roads to include over 70,000 additional miles (112,000 additional km) by the end of 2019, bringing the total number of Super Cruise enabled roads to over 200,000 miles (320,000 km). In addition to the currently mapped roads, this mileage expansion allows for the Super Cruise driver assistance feature to be engaged on divided, high-speed main roads that contain some limited intersections and traffic control devices. As always, it remains important for drivers to stay engaged and vigilant at all times while Super Cruise is engaged. Reprogram Active Safety Control Module and the Digital Map Control Module.
PIT56982019-08-12. Service bulletin. EQUIPMENT. This Preliminary information communicates additional information on how a LIN bus operates and diagnostic tips when working on a LIN bus.
PIC6208D2019-08-12. Service bulletin. EQUIPMENT. This Preliminary information communicates that when a customer or technician attempts to add a new transmitter to a vehicle following the adding transmitters without Service Programming System procedure the procedure will not complete and a message "Remote Learn Pending" will be displayed on the Driver Information Center. In the past to perform the new transmitter procedure only one previously learned transmitter was required but this is no longer the case. Now, two previously learned transmitters are required to be placed into the cup holder and then the new transmitter to be programmed placed in the transmitter pocket. If this new procedure is not followed, the "adding transmitters without Service Programming System" cannot be performed. The technician will be forced to add a transmitter using Service Programming System.
PIT3099R2019-08-12. Service bulletin. EQUIPMENT. This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact Partech and/or the Techline Customer Support Center for additional support.
1308116001E2019-07-29. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
100845001G2019-07-29. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. This bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish.
090604026Q2019-07-29. Service bulletin. ENGINE; EQUIPMENT. This informational bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
060847001O2019-07-29. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM. This bulletin explains the labor operation numbers used for submitting warranty claims for module reprogramming and not when replacing a module.
000601012J2019-07-29. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. This informational bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
19NA1282019-07-29. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; POWER TRAIN. This technical bulletin provides a procedure to rebuild the transmission and install a snap ring retainer to eliminate the 1-3 clutch spring ring from coming out of the ring groove.
16NA2222019-07-29. Service bulletin. EQUIPMENT. This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
16NA1192019-07-01. Service bulletin. EQUIPMENT. This warranty administration bulletin provide policy information to cover GM's policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada.
080089014E2019-07-01. Service bulletin. EQUIPMENT. This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
PIP5632A2019-06-10. Service bulletin. EQUIPMENT. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIP5226C2019-06-10. Service bulletin. EQUIPMENT; ENGINE. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
PIC63592019-06-03. Service bulletin. EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM:SOFTWARE. This Preliminary information communicates a normal cycling draw caused by the keyless entry control module for approach lighting.
1008110001H2019-05-20. Service bulletin. EQUIPMENT. This informational bulletin provides information on proper use of floor mats.
030729004L2019-05-20. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION; EQUIPMENT. This informational bulletin provides normal operating characteristics and diagnostic information on Manual transmissions.
17NA1532019-05-20. Service bulletin. EQUIPMENT; STRUCTURE:BODY:HATCHBACK/LIFTGATE; STRUCTURE. This informational bulletin provides information and operating tips for the hands free lift gate.
150603002G2019-05-13. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; EQUIPMENT. This informational bulletin provides information on approved warranty part numbers for original equipment batteries
040601029I2019-05-13. Service bulletin. EQUIPMENT. This informational bulletin explains the importance of maintaining the vehicle.
000601012H2019-05-13. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
172562019-04-22. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL; EQUIPMENT:OTHER:LABELS. 17256-Product Emission Recall. General Motors has decided to conduct a Voluntary Emission Recall on certain vehicles. The Vehicle Emission Control Information label does not include the correct California emission standard to which the vehicle is certified. Dealers will replace the Vehicle Emission Control Information label with a label containing the correct information.
PIE0495A2019-04-22. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This engineering information PI ends the need for information from the field on a oil leak from the oil pan.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.