WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Cadillac CT6

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1316 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Equipment and accessories are shown. Show all

Bulletins, newest first
17-NA-3242021-04-15. Service bulletin. SUSPENSION:FRONT:STABILIZER BAR; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. Information on P80 Lubricant for Front Stabilizer Shaft The purpose of this bulletin is to inform dealership technicians that a P80 lubricant, GM P/N 19354433 (In Canada, P/N 19354434), is available and REQUIRED for any repairs that involve the removal of the front stabilizer shaft. The Front Stabilizer Shaft Replacement procedure in SI has been updated to reflect this change
16-NA-1752021-04-13. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:GEARS; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. SHAKE AND/OR SHUDDER DURING LIGHT THROTTLE ACCELERATION BETWEEN 40 AND 128 KM/H (25 AND 80 MPH) AT A STEADY STATE.
21NA0262021-03-08. Service bulletin. EQUIPMENT; STRUCTURE; EQUIPMENT ADAPTIVE/MOBILITY. This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen.
18NA2852021-03-01. Service bulletin. EQUIPMENT; FUEL SYSTEM, OTHER:KINETIC:CLUTCH. This informational bulletin advises the tech of a possible normal condition when the vehicle creeps forward during start up conditions when the clutch packs are full of residual oil.
090604026S2021-03-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE; EQUIPMENT. This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
040089015V2021-03-01. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This bulletin provides information on Warranty Administration ? Required Operating Procedures - 8 Points (U.S. Only).
010601011L2021-03-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION; EQUIPMENT. This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
18NA3062021-02-22. Service bulletin. EQUIPMENT. This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
PIP5730A2021-02-16. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Preliminary information communicates additional diagnostic information for DTC's P0016 and P0018.
PIC64242021-02-16. Service bulletin. EQUIPMENT; AIR BAGS. This Preliminary information communicates a condition where there is only newer hardware available when replacing the Active Safety Control Module. The newer hardware is not compatible with whatis currently loaded into the SPS programming system. Engineering is working on a new software set to address the concern.
090604026S2021-02-01. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING. This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
040089015V2021-02-01. Service bulletin. EQUIPMENT. This bulletin provides information on Warranty Administration ? Required Operating Procedures - 8 Points (U.S. Only).
010601011L2021-02-01. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
19NA1282021-02-01. Service bulletin. EQUIPMENT; POWER TRAIN. This technical bulletin provides a procedure to rebuild the transmission and install a snap ring retainer to eliminate the 1-3 clutch spring ring from coming out of the ring groove.
18NA3062021-02-01. Service bulletin. EQUIPMENT. This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
17NA0402021-02-01. Service bulletin. EQUIPMENT; SERVICE BRAKES. This technical bulletin provides a procedure to correct a condition of Brake Squeal or Squeak Noise Intermittently on Initial Brake Applies.
PIP5730A2021-01-25. Service bulletin. EQUIPMENT. This Preliminary information communicates additional diagnostic information for DTC's P0016 and P0018.
990851001E2020-12-21. Service bulletin. EQUIPMENT; STRUCTURE. Thins informational bulletin provides information on Paint-less Dent Repair Process.
000310002L2020-12-21. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; WHEELS. This service bulletin provides information on Chemical Staining, Pitting, Corrosion and/or Spotted Appearance of Chromed Aluminum Wheels.
18NA2632020-12-21. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This warranty administration bulletin provide policy information for variable diagnostic time allowances on select labor operations (U.S. Only).
PIT5074N2020-12-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
PIC6208E2020-12-14. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. This Preliminary information communicates that when a customer or technician attempts to add a new transmitter to a vehicle following the adding transmitters without Service Programming System procedure the procedure will not complete and a message "Remote Learn Pending" will be displayed on the Driver Information Center. In the past to perform the new transmitter procedure only one previously learned transmitter was required but this is no longer the case. Now, two previously learned transmitters are required to be placed into the cup holder and then the new transmitter to be programmed placed in the transmitter pocket. If this new procedure is not followed, the "adding transmitters without Service Programming System" cannot be performed. The technician will be forced to add a transmitter using Service Programming System.
1308116001F2020-12-07. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION. The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
060089026Q2020-12-07. Service bulletin. EQUIPMENT. This warranty administration bulletin provides information on Warranty Administration - Customer Concern Not Duplicated (CCND) Labor Operation Numbers.
20NA2132020-11-30. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; ENGINE AND ENGINE COOLING. This service bulletin provides information on Improved Oil Filter Gasket Design for Spin-On Oil Filters PF63, PF64 and PF48.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.