WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Buick Verano

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1545 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
08-08-51-002A2018-04-16. Service bulletin. STRUCTURE:BODY. This informational bulletin provides information pre-painting/cleaning process for TPO plastic fascias.
PI10192018-04-02. Service bulletin. STRUCTURE. This preliminary information bulletin provides a procedure for right side engine mount replacement due to an engine mount that is not dampening the engine/suspension vibrations as designed to eliminate a hollow or knocking noise at low speeds.
02-07-30-029Y2017-12-22. Service bulletin. STRUCTURE. This informational bulletin provides information on the PQC assembly replacement process - for dealers required to contact PQC prior to replacing an assembly (U.S. and Canada only).
PIP4495E2017-11-14. Service bulletin. STRUCTURE:BODY:HOOD. This Preliminary Information communication provides information to the technician about vehicles that have a loud tick or rattle noise under the hood at all operating conditions. Technician will need to check the lower and oil pressure to the upper end oil pressure. Technician will need to inspect the oil feed orifice in the cylinder head. Technician will clean out and debris found in the orifice.
PIP53382017-08-15. Service bulletin. SUSPENSION; STRUCTURE:FRAME AND MEMBERS. This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include ?Vibration? ?Business Associate Code? and the last 8 of the Vehicle Identification Number.
G-1668272017-08-15. Service bulletin. STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS. 13125 - Customer Satisfaction Program - There may be an interference condition between the outside door handle and the door handle bracket assembly. This could cause the outside door handle to stick or bind in the open position when the door is opened from outside of the vehicle. If this occurs, the door may bounce back when attempting to close it. If the door does not latch, a warning chime will sound and a warning message in the instrument cluster will illuminate. Tapping on the outside door handle or closing the door with higher effort should free the door handle and allow it to latch. Dealers will inspect and modify the front and rear outside door handles.
PIC5793A2017-08-15. Service bulletin. STRUCTURE; EQUIPMENT:ELECTRICAL; VISIBILITY:WINDSHIELD; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that have a water leak on the driver side floor. Vehicles also may have intermittent no fob detected, no crank no start, park brake light flashing, a rough running concern, Service Engine Soon light on, power locks locking on their own, Service Park Assist message. Technician should inspect the X200 for water intrusion or corrosion and replace any of the terminals that are corroded. If water intrusion is found inspect the windshield for voids in seam sealer and reseal the windshield.
05-08-51-001H2017-08-15. Service bulletin. STRUCTURE:BODY. This informational bulletin provides information on removing paint stains on the under side of protective shipping film
PI0373A2016-11-23. Service bulletin. STRUCTURE; EQUIPMENT; VISIBILITY:REARVIEW MIRRORS/DEVICES. THIS PRELIMINARY INFORMATIONAL BULLETIN PROVIDES A PROCEDURE FOR RELEARNING THE POWER FOLDING MIRRIORS AND ROAD TESTIN TO VERIFY THEY CORRECT A CONDTION OF THE POWER FOLDING MIRRIORS GLASS SHAKES, FLUTTERS AT NORMAL DRIVING CONDITIONS.
PIC-5260-A2016-08-11. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM; VISIBILITY:SUN/MOON ROOF ASSEMBLY. THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THE STEPS ON DIAGNOSING THE CONCERN. VEHICLE'S SUNROOF OPERATION INTERMITTENT, BIND, NOISE, AUTO-REVERSE, AND/OR WATER LEAKS.
PI-0281-E2016-08-06. Service bulletin. EQUIPMENT; STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS. THIS PRELIMINARY INFORMATIONAL BULLETIN PROVIDES INFORMATION THAT MAY BE HELPFUL WHEN ADDRESSING UNDERBODY COMPONENT CORROSION WITH CUSTOMERS.
SB-0000166827-A2016-03-31. Service bulletin. STRUCTURE:BODY:DOOR; STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PI-0018-B2014-01-04. Service bulletin. STRUCTURE:BODY:DOOR; VISIBILITY:GLASS, SIDE/REAR. GENERAL MOTORS: THE WINDOWS, FRONT AND REAR, WOULD BIND, POOR FIT, MISALIGNMENT, MAKES RATTLE OR SQUEAKING NOISES, MOVES SLOWLY AND IS INOPERATIVE. MODEL 2008-2014 VEHICLES AND TRUCKS. *PE
SB-131252013-07-10. Service bulletin. STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS. GENERAL MOTORS: SEE DOCUMENT SEARCH BUTTON FOROWNER LETTER. VEHICLES EQUIPPED WITH THE KEYLESS ENTRY FEATURE MAY BE EXPERIENCING STICKING OF THE FRONT AND REAR DOOR HANDLES. *KB

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.