WenmarOpen by Wenmar Pro

Recalls that may apply to the 2001 BMW X5

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

Campaign 25V748000 may apply to this vehicle. NHTSA advises: do not drive until the repair is done.

Campaign 17V047000 may apply to this vehicle. NHTSA advises: do not drive until the repair is done.

By component

United States: NHTSA, as of 2026-10-19
25V7480002025-10-31. AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE. BMW of North America, LLC (BMW) is recalling certain 2000-2001 X5 vehicles that may be equipped with a sport steering wheel containing a Takata PSDI-4 air bag inflator. The inflator may explode during deployment due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature, and temperature cycling. NHTSA advises: do not drive until the repair is done.
17V0470002017-01-20. AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE. BMW of North America, LLC (BMW) is recalling certain 2000-2002 BMW 320i, 323i, 325i, 325xi, 330i, 330xi, 323Ci, 325Ci, 330Ci, M3, 323iT, 325iT and 325xiT vehicles, 2001-2002 525i, 530i, 540i, M5, 525iT and 540iT vehicles, and 2001-2003 X5 3.0i, X5 4.4i, and X5 4.6is vehicles. These vehicles may have had a driver-side air bag module installed as replacement equipment such as after a vehicle crash necessitating replacement of the original air bag, or as a remedy part for a prior recall. These replacement modules contain an air bag inflator that may rupture due to propellant degradation occurring after long-term exposure to lower absolute humidity, temperature and temperature cycling. Built 2000-04-18 to 2003-01-31. NHTSA advises: do not drive until the repair is done.
03V0010002003-01-09. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS. ON CERTAIN SPORT UTILITY VEHICLES, IT MAY BE POSSIBLE FOR THE FRONT BRAKE LINE TO SLIP OUT OF THE RETAINING BRACKET LOCATED AT THE FRONT STRUT. THE BRAKE HOSE THAT IS ATTACHED TO THE BRAKE LINE COULD COME IN CONTACT WITH THE TIRE AND BE SUBJECTED TO WEAR AND ABRASION. Built 1999-08-01 to 2002-04-12.
02V1940002002-07-24. SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES. ON CERTAIN PASSENGER VEHICLES, DUE TO A MANUFACTURING PROBLEM, THE BRAKE PEDAL ARM PIVOT SHAFT COULD LOOSEN FROM ITS SUPPORT BRACKET. Built 1999-08-19 to 2001-02-08.
02V1380002002-05-16. ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN. ON CERTAIN PASSENGER VEHICLES, THE ENGINE AUXILIARY/COOLING FAN OPERATION, INCLUDING VARIABLE SPEED, IS ELECTRONICALLY CONTROLLED. FAILURE OF THE FAN MOTOR CAN CAUSE THE ELECTRICAL CIRCUITRY OF THE FAN CONTROL UNIT TO OVERLOAD AND FAIL, CAUSING THE FAN TO STOP OPERATING.
01V2060002001-06-21. ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN. VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE ENGINE AUXILIARY/COOLING FAN OPERATION, INCLUDING VARIABLE SPEED, IS ELECTRONICALLY CONTROLLED. FAILURE OF THE FAN MOTOR CAN CAUSE THE ELECTRICAL CIRCUITRY OF THE FAN CONTROL UNIT TO OVERLOAD AND FAIL, CAUSING THE FAN TO STOP OPERATING. Built 2000-12-18 to 2001-09-05.
01V1970002001-06-14. SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM. VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. DUE TO AN ASSEMBLY ERROR, ONE OR BOTH SELF-LOCKING NUTS THAT SECURE THE PEDAL ASSEMBLY TO THE BOOSTER MAY HAVE BEEN CROSS-THREADED ON THE BOOSTER STUDS THAT PROTRUDE THROUGH THE FIREWALL. IN SUCH A CASE, THE NUT(S) WOULD NOT BE FULLY SEATED ON THE STUD(S). Built 2001-03-08 to 2001-03-11.
01V1960002001-06-14. POWER TRAIN:AUTOMATIC TRANSMISSION:PARK/NEUTRAL START INTERLOCK SWITCH. VEHICLE DESCRIPTION: 4.4I SPORT UTILITY VEHICLES. OVER AN EXTENDED PERIOD OF TIME, ABRASION PARTICLES COULD DEPOSIT ON THE ELECTRICAL CONTACTS WITHIN THE SWITCH, CAUSING A DISRUPTION OF THE ELECTRIC CURRENT THROUGH THE CONTACTS. IF THE DISRUPTION OCCURS WHEN THE VEHICLE IS STATIONARY WITH THE TRANSMISSION IN THE NEUTRAL OR PARK POSITIONS, THE TRANSMISSION WILL SWITCH AUTOMATICALLY INTO THE EMERGENCY PROGRAM, WHICH IS DISPLAYED IN THE INSTRUMENT CLUSTER VIA A WARNING LAMP AND A MESSAGE, "TRANS. FAIL-SAFE PROG." IN THIS CASE, THE VEHICLE CAN BE DRIVEN IN LOWER GEARS ONLY WITH LIMITED ENGINE OUTPUT. Built 1999-09-01 to 2001-02-28.
01V1730002001-05-24. STEERING:HYDRAULIC POWER ASSIST:PUMP. VEHICLE DESCRIPTION: PASSENGER VEHICLES. DUE TO AN ASSEMBLY ERROR DURING VEHICLE PRODUCTION, ANY OF THE THREE BOLTS THAT SECURE THE PULLEY TO THE PUMP MAY HAVE BEEN INADEQUATELY TIGHTENED. Built 2001-03-08 to 2001-03-11.
01V0300002001-02-06. STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM. VEHICLE DESCRIPTION: PASSENGER VEHICLES. DURING ASSEMBLY OF THESE VEHICLES, THE LOWER END OF THE SPINDLE MAY NOT HAVE BEEN INSERTED COMPLETELY INTO THE COUPLING. IN SUCH A CASE, THE FASTENING BOLT USED TO SECURE THE CONNECTION MAY NOT COMPLETELY ENGAGE THE SPINDLE WITHIN THE COUPLING. DURING DRIVING, IT WOULD BE POSSIBLE FOR THE SPINDLE TO DISCONNECT. Built 2000-09-21 to 2001-01-19.
00V3410002000-10-24. STEERING:LINKAGES:ROD:RELAY:CONNECTING. VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE NUT THAT SECURES THE AXIAL JOINT OF THE LEFT STEERING TIE ROD TO THE STEERING GEAR BOX MAY HAVE NOT HAVE BEEN TIGHTENED SECURELY. THIS COULD LEAD TO LOOSENING OF THE NUT AND, INITIALLY TO STEERING WHEEL PLAY AND/OR MISALIGNMENT, AS WELL AS NOISE FROM THE STEERING LINKAGE. IF VEHICLE OPERATION CONTINUES, THE TIE ROD COULD DISCONNECT FROM THE STEERING GEAR BOX. Built 2000-09-10 to 2000-10-13.
00V2610002000-09-11. SEAT BELTS:FRONT:ANCHORAGE. VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE SAFETY BELT LOWER OUTBOARD ANCHORAGE BOLT ON THE DRIVER'S AND FRONT PASSENGER'S SEATS MAY NOT HAVE BEEN SECURED PROPERLY. Built 2000-06-28 to 2000-07-31.
Canada: Transport Canada, as of 2026-10-19
20256022025-10-31. Airbag. Issue: This recall applies to vehicles that may be equipped with a replacement sport steering wheel that has a Takata airbag. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: To reduce the safety risk, BMW advises you not to drive the vehicle until the recall repairs have been completed. BMW will notify owners by mail and advise you to contact a dealership to arrange for an inspection and, if necessary, replacement of the driver-front airbag module. To learn if your vehicle is affected by this recall, owners may: • Visit <a href= https://www.bmw.ca/en/ssl/VehicleRecall.html> https://www.bmw.ca/en/ssl/VehicleRecall.html</a> • Contact your preferred or local BMW Retailer • Call BMW Customer Relations Recall Services at 1-855-217-3002
20190202019-01-15. Airbag. Issue: 2023 Update - BMW has updated this recall and issued a do not drive advisory for all vehicles that that not yet been repaired. Some vehicles may contain a replacement sport steering wheel with a Takata driver-front air bag module. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: BMW advises not to drive your vehicle unless this recall repair has been completed. BMW will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. To learn if your vehicle requires repair, owners may: • Visit https://www.bmw.ca/en/ssl/VehicleRecall.html • Contact your preferred or local BMW Retailer • Call BMW Customer Relations Recall Services at 1-855-217-3002
20170342017-01-20. Airbag. Issue: 2023 Update - BMW has updated this recall and issued a do not drive advisory for all vehicles that that not yet been repaired. This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: BMW advises not to drive your vehicle unless this recall repair has been completed. BMW will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. To learn if your vehicle requires repair, owners may: • Visit https://www.bmw.ca/en/ssl/VehicleRecall.html • Contact your preferred or local BMW Retailer • Call BMW Customer Relations Recall Services at 1-855-217-3002
20121292012-04-12. Label. Certain vehicles fail to conform to Canada Motor Vehicle Safety Standards. Specifically, the compliance label does not indicate the wheel rim size, as required by the Standard. Correction: Due to the inconsequential nature of this non-compliance, no action will be taken.
20030012003-01-08. Brakes. On certain vehicles, the grommet holding the brake line to the front struts may slip out of its bracket. Consequently, the brake hose attached to the brake line may come in contact with the tire and be subject to wear and abrasion. This could cause some brake fluid leakage which would eventually illuminate the brake warning indicator light. If a loss of front brake performance occurs, the rear brake circuit will still be functional, and will be able to slow and stop the vehicle. Correction: Dealer will install an additional retaining clip in order to further secure the line and grommet to the strut.
20021382002-07-22. Brakes. On certain passenger vehicles the brake pedal arm pivot shaft could loosen from its support bracket. Eventually, the brake pedal arm could detach from the bracket, rendering the braking system ineffective, increasing the risk of a crash. Correction: Dealers will check the brake pedal arm pivot shaft for proper seating in its support bracket. In addition, a pin will be installed to secure the shaft to the bracket.
20011822001-07-09. Engine. Certain passenger vehicles. The engine auxiliary/cooling fan operation, including variable speed, is electronically controlled. Failure of the fan motor can cause the electrical circuitry of the fan control unit to overload and fail, causing the fan to stop operating. If this were to occur, engine overheating and subsequent engine damage could result. In addition, it is possible for the failure of the electrical circuitry to cause a fire in the fan control unit located in the front of the engine compartment. Correction: Dealers will replace the fan.
20010392001-02-21. Steering. On certain vehicles, the lower end of the upper steering spindle may not have been inserted completely into the aluminum u-joint assembly (coupling). In such a case, the fastening bolt used to secure the connection may not completely engage the spindle within the coupling. This would make it possible for the spindle to disconnect from the coupling, resulting in loss of steering capability and a possible crash. Correction: Spindle will be inspected for proper insertion into the coupling. If necessary, the spindle will be fully inserted and the fastening bolt replaced.
20002792000-11-28. Seats And Restraints. On certain vehicles, the safety belt lower outboard anchorage bolt on the driver's and front passenger's seats may not have been secured properly. In the event of a crash, the safety belt system might not be able to provide its maximum restraint function. Correction: Dealers will inspect the bolts and correct the torque if necessary.
20002772000-11-28. Steering. On certain vehicles, the nut that secures the axial joint of the left steering tie rod to the steering gear box may not have been tightened securely. This could lead to loosening of the nut and, initially to steering wheel play and/or misalignment, as well as noise from the steering linkage. If vehicle operation continues, the tie rod could disconnect from the steering gear box. If this were to occur, loss of steering control could result. Correction: Dealers will inspect and re-torque the nut securing the axial joint of the left steering tie rod. If the torque of the nut is found to be loose, the right nut will also be checked and corrected if necessary, and a front wheel alignment will be performed.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.