WenmarOpen by Wenmar Pro

Service bulletins for the 2017 BMW M760i

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

360 on file from NHTSA, as of 2026-10-19.

By type

By component

Bulletins, newest first
B1119182019-01-07. Service bulletin. ENGINE AND ENGINE COOLING. A Delivery Stop has been issued (effective November 16, 2018) on Model Year 2019 BMW 5 Series, 7 Series and X5 SAV vehicles that have been produced between June 29, 2018 ? September 10, 2018. The issue involves the oil-to-water heat exchanger which can start to leak. Approximately 285 vehicles are affected by this delivery stop.
B6612162018-12-10. Service bulletin. ELECTRICAL SYSTEM. DRIVER PROFILE NOT SET PROPERLY. Driver settings revert to an alternate driver profile upon entry into vehicle. Body Domain Controller (BDC) software error
B6303162018-12-10. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS. "G12 Faulty LED Headlight. One of the following situations exists: A. One of the following lights fail to operate (with no CCM and no fault codes in either FLM (Front Light Module): The cornering light The inner low-beam headlight The side marker light B. The headlights cannot be turned on and the following additional conditions may exist: CCM (Check Control Message) of ""The lighting system at the front (left and / or right) is faulty"" The battery may be discharged. One or more fault code(s) may be present in FLM (left right side(s)): - 8059BA Internal control unit fault / left - 43012E Controller cannot be switched off / left - 43010C Watchdog has triggered a reset / left - 805B34 Internal control unit fault / right - 44012E Controller cannot be switched off / right - 44010C Watchdog has triggered a reset / right Software error in FLM."
B6209162018-12-10. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM. Instrument Cluster Clock Loses Time. The time displayed in the KOMBI (instrument cluster) may lose a few minutes each week Internal KOMBI calculation error.
B6107162018-12-10. Service bulletin. VISIBILITY:WINDSHIELD WIPER/WASHER. An Erroneous CCM is displayed for Low Washer Fluid Level. At low outside ambient temperatures (approximately 18 F or lower), an erroneous CCM (Check Control Message) is displayed for Low Washer Fluid. The washer fluid reservoir is full. Incorrect coding for washer fluid level detection.
B1213162018-12-10. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE. N63R Map Thermostat Faults. The Service Engine Soon light is on with one or more of the following fault codes: 1D2009 - characteristic map thermostat: clamped closed 10921B - characteristic map thermostat, stroke sensor: short circuit to ground 1D2008 - characteristic map thermostat: clamped open 1D2401 - characteristic map thermostat, actuation: short circuit to B+ 10921A - characteristic map thermostat, stroke sensor: short circuit to B+ 1FB201 - Check Control message (ID 257): Engine too hot! Drive gently 1FB301 - Check Control message (ID 39): Engine overheated. Stop carefully 1D2404 - characteristic map thermostat, actuation: line disconnection 1D2402 - characteristic map thermostat, actuation: short circuit to ground In severe cases there may be no communication with the DME (MASTER DME - control unit description file DME8FF_R) Coolant is leaking past the map thermostat electrical connector.
B1104162018-12-10. Service bulletin. ENGINE. N63R Engine. Replace the Wastegate Actuators and Program the Vehicle This Service Information bulletin supersedes SI B111 04 16 dated May 2016.. An internal manufacturing defect in the electric wastegate actuator can lead to a reduction in the engine power, engine malfunction warning illuminated and various faults stored the DME for wastegate operation.
B6406162018-12-10. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:APPLIANCE:AIR CONDITIONER. "Automatic Rear A/C System Resets to Default at Engine Start. The temperature setting of the automatic rear air-conditioning system is always reset to the ""DEFAULT"" value after the engine starts or after a terminal change. Software in the control panel of the automatic rear air-conditioning system"
B3205162018-12-10. Service bulletin. STEERING. Erroneous Electric Power Steering (EPS) Fault. INFORMATION This is an erroneous fault! After a terminal status change, the fault disappears until the next diagnostic session. Do not replace any parts as this will not provide a resolution. This erroneous fault will be eliminated with ISTA/P 3.59 (I-Level S15A 16-07-501). WARRANTY INFORMATION Not applicable.
B8408152018-12-10. Service bulletin. EQUIPMENT:ELECTRICAL. "During the QC1 the BMW Assist Test Call Fails. After the transport mode is deleted (during the QC1), a BMW Assist (SOS) test call is made by pressing the SOS/ E-Call button. However, the call only connects via voice (no data is transmitted). The operator indicates that a crash call has been sent. ATM fault code ""B7F348 - Provisioning without signature OTA"" is stored. The provisioning of the ATM (Advanced Telematics Module) has failed."
B6606162018-12-10. Service bulletin. ENGINE AND ENGINE COOLING. "Error Patterns with BMW Display Key. One or more of the following error patterns occurred while using the BMW display key; these error patterns only occur with the BMW display key: Comfort Access does not work while opening and closing. The BMW display key cannot be charged (USB cable or wirelessly). The BMW display key screen is locked and cannot display vehicle information. Sporadically, the engine will not start with BMW display key and one of the following CCM ""Check Control messages"" is displayed: Remote control, remote control not present or faulty. Not possible to start engine. Hold the remote near the steering column and then press the START-STOP button. see ""Owner's Handbook"". NOTE: The BMW display key continues to be able to lock/unlock the vehicle with the buttons, and/or the engine started, by emergency detection procedure (placing the BMW display key on the marked area of the steering column). Data lost during the communication between the BMW display key and FBD receiver"
B6605162018-12-10. Service bulletin. ELECTRICAL SYSTEM. BMW Display Key Battery is Completely Discharged at Vehicle Delivery. The battery of the BMW display key is completely discharged during transport and is almost empty at the time of vehicle delivery. Extended vehicle storage.
B6603162018-12-10. Service bulletin. LANE DEPARTURE: SENSING SYSTEM: CAMERA. "Driver Assistance System Limited Support CCM. A Check Control Message (CCM) is displayed advising the customer that ""Support provided by the driver assistance system is limited"". You can continue to drive. One or more of the following faults codes may be stored: KAFAS Control unit: 0x800A01 - Camera field of view disturbed by weather conditions 0x800ABE - Camera blindness SAS control unit: 0xD1AD88 - Signal fault invalid Software error in the KAFAS control unit"
B6513162018-12-10. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. "NBT-EVO Head Unit Cannot Be Swapped Between Vehicles for Testing. If an NBT-EVO head unit is swapped into a different vehicle it will enter a locked mode once it recognizes a different VIN. This will require REPLACEMENT of the head unit to restore operation. To prevent easy re-use of stolen Head units additional features are introduced with 11/15 ISTA/P software to bring NBT-EVO to a higher security level. In NBT-EVO the mechanism is called ""Trusted VIN"""
B0106162018-12-10. Service bulletin. EQUIPMENT. "Supply and Retrofit an Additional Key Radio Remote Control (FOB) ""without"" Display. While mid-year model/equipment level changes to vehicles commonly occur within the automobile industry, as previously announced, BMW of North America, LLC (""BMW NA"") has decided to offer this ""newer equipment level"" to eligible early-adopter G12 (7 Series Sedan) owners/customers that qualify."
B6204162018-12-10. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. HeadUp Display Does not Work After Programming. After programming the vehicle with ISTA/P 3.57.3 or 3.58.x; one, or more, of the following situations could exist: The LED display of the tachometer in the instrument cluster is blacked out when door is opened and engine is running (shown below, left). After closing the door, tachometer will display again (shown below, right). The Check Control message is not displayed. HUD (HeadUp Display) does not work. No fault memory is displayed in the final report from ISTA/P or during PDI. This affects vehicles with I-Level S15A-15-11-503 or S15A-16-03-50x. This will not occur in vehicles produced after June 29, 2016. A programming abort occured during programming of the instrument cluster causing a software error in the instrument cluster.
B3401162018-12-10. Service bulletin. SUSPENSION; ELECTRICAL SYSTEM:SOFTWARE. "SUBJECT Dynamic Stability Control (DSC) Warning Lamp, Lights Up. Various ""DSC warning lamps lights up in the instrument cluster, including the display: ""Suspension control system failed"". DSC control unit"
B8401172018-12-10. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. ?E-Call system activates on its own without customer interaction. Software error in Telematic Control unit.
B6626162018-12-10. Service bulletin. LANE DEPARTURE: SENSING SYSTEM: CAMERA; ELECTRICAL SYSTEM:SOFTWARE. LOSS OF DRIVERS ASSISTANCE FUNCTION AFTER PROGRAMMING. An enabling code for various KAFAS (Camera Assisted Drivers Assistance System) functions is not present in control unit software.
B6624162018-12-10. Service bulletin. VISIBILITY; LANE DEPARTURE. Incorrect detection of Blind Spot Warning sensor (HC2-sensor). The radar waves are incorrectly scattered.
B6217162018-12-10. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM:SOFTWARE; FUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM. ?FUEL GAUGE AND RANGE DISPLAY FAILURE.
B8406162018-12-03. Service bulletin. ELECTRICAL SYSTEM. ?BMW ONLINE NON-FUNCTIONAL: CHECK ICC-ID IN ACCOUNT. BMW Online/BMW ConnectedDrive not functional. Vehicle and service cockpit have different ICC-ID's (Integrated Circuit Card Identifier).
B8402142018-12-03. Service bulletin. ELECTRICAL SYSTEM. ?CONNECTEDDRIVE/BMW ASSIST SYSTEM DIAGNOSIS INFORMATION. ConnectedDrive/BMW Assist features are partially or completely inoperative. This Service Information bulletin is being published because vehicles are down for an extended period of time when researching system failures with ConnectedDrive or BMW Assist. This Service Information bulletin will assist you both in identifying the issue and providing technical support. CAUSE Not enough information is available for BMW NA engineers to assist the technician in diagnosing the root cause.
B6620172018-12-03. Service bulletin. ELECTRICAL SYSTEM. ?DISPLAY KEY IS NON-FUNCTIONAL. Display key is non-functional. Display key cannot be charged or switched on. Possibly defective display key.
B1111182018-12-03. Service bulletin. ENGINE. ?SERVICE ACTION: N63R ENGINE - CHECK AND REPLACE VANOS ACTUATORS, OIL FEED LINES, CHARGE AIR COOLERS AND THE MAP THERMOSTAT ELECTRICAL CONNECTOR. This bulletin describes the procedures to inspect and if necessary replace the following components: * Check VANOS System (vehicle test and review faults stored in the DME) * Turbo charger oil feed lines (leaking) * Charge air coolers (corrosion) * Map thermostat and electrical harness (corrosion) Also, make sure that Service Bulletin B12 24 18 Service Action: Program Control Units, is completed when performing this Service Action.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.