2019-05-20. On the affected vehicles the CBS engine oil service interval has been reduced to 1 year/10000 miles to make these vehicles consistent with all other N63x engine equipped vehicles. NHTSA's copy of the document (PDF)
2019-05-20. On the affected vehicles the CBS engine oil service interval has been reduced to 1 year/10000 miles to make these vehicles consistent with all other N63x engine equipped vehicles. NHTSA's copy of the document (PDF)
2018-12-10. "This Service Information bulletin and attachment supersedes SI B11 16 14 dated May 2015. designates changes to this revision SUBJECT N63 Engine: Check the Timing Chain. INFORMATION This bulletin outlines the procedure for checking the engine timing chains for wear, and should be completed in conjunction with SI B11 06 14, ""N63 Customer Care Package."" The N63CCP and N63 Engine Check the Timing Chain are NOT mandatory Technical Campaigns or Recalls. They should be completed only based on parts availability, workshop capacity, and the customer's schedule. Performing the test plans identified in the procedure below will detect wear at an early stage and, if necessary, provide a repair solution. To avoid future valvetrain wear, the vehicle must be reprogrammed and a shorter oil service interval must be retrofitted via ISTA/P. Finally, drain and replace the engine's oil and filter. After completing all necessary repairs included in the N63 Customer Care Package and the Timing Chain Check, the vehicle must be test driven for up to 30 minutes to ensure that the repairs were performed to the highest standard." NHTSA's copy of the document (PDF)
2018-11-13. N63 Engine: Check the Timing Chain. INFORMATION This bulletin outlines the procedure to check the engine timing chains for wear and should be completed in conjunction with SI B11 06 14 "N63 Customer Care Package". Performing the test plans identified in the procedure below will detect wear at an early stage and if necessary provide a repair solution. To avoid future valvetrain wear, the vehicle must be reprogrammed and a shorter oil service interval must be retrofitted via ISTA/P. Finally, drain and replace the engine's oil and filter. After completing all necessary repairs included in the N63 Customer Care Package and the Timing Chain Check, the vehicle must be test driven for up to 30 minutes to assure the highest standard of performed repairs. NHTSA's copy of the document (PDF)
2018-11-13. "This bulletin outlines the procedure for checking the engine timing chains for wear, and should be completed in conjunction with SI B11 06 14, ""N63 Customer Care Package."" The N63CCP and N63 Engine Check the Timing Chain are NOT mandatory Technical Campaigns or Recalls. They should be completed only based on parts availability, workshop capacity, and the customer's schedule. Performing the test plans identified in the procedure below will detect wear at an early stage and, if necessary, provide a repair solution. To avoid future valvetrain wear, the vehicle must be reprogrammed and a shorter oil service interval must be retrofitted via ISTA/P. Finally, drain and replace the engine's oil and filter. After completing all necessary repairs included in the N63 Customer Care Package and the Timing Chain Check, the vehicle must be test driven for up to 30 minutes to ensure that the repairs were performed to the highest standard. AFFECTED VEHICLES This Service Action applies to E70, E71, E72, F01, F02, F04, F07, F10, F12, and F13 vehicles with the N63 engines corresponding to the production dates listed above. First check if a Service Action label with a code number 728 is already attached to the B-pillar. If a code number 728 has already been punched out, the Campaign has already been performed and no further action is necessary. Eligible vehicles will show the following Service Action-related Campaign Code: 00 13 48 02 00 If the vehicle already has a label from a previous Service Action/Recall Campaign, affix the new label next to the old one. Do not affix one label on top of another one, because a number from an underlying label could appear in the punched-out hole of the new label." NHTSA's copy of the document (PDF)
Bulletins from the manufacturer that mention a maintenance schedule or a service interval, as NHTSA summarises them. They are not the schedule itself: read the document, and the owner's manual.
Position 8 of a VIN names the engine on many vehicles: how to read a VIN. Safety equipment depends on the trim, so decode a VIN to see what one vehicle has.
Crash test ratings
NHTSA crash test ratings for the 2013 BMW M6
M6, 2 DR, RWD
Not rated by NHTSA.
M6, C, RWD
Not rated by NHTSA.
Stars are NHTSA's, from 1 to 5, each for the vehicle NHTSA names in its row: a model year can have several ratings, and they can differ. From NHTSA's file as of 2026-08-07. See NHTSA's ratings, or the JSON, which also lists safety features.
Fuel economy
Fuel consumption of the 2013 BMW M6, combined, city and highway
Engine
Source
Combined
City
Highway
Recommended fuel
4.4L
EPA
13.8 to 14.7 L/100 km (16 to 17 MPG)
15.7 to 16.8 L/100 km (14 to 15 MPG)
10.7 to 11.8 L/100 km (20 to 22 MPG)
Premium Gasoline
4.4L
NRCan
12.8 to 13.7 L/100 km (17 to 18 MPG)
14.9 to 16.1 L/100 km (15 to 16 MPG)
10.2 to 10.9 L/100 km (22 to 23 MPG)
Premium Gasoline
A range covers the drives and transmissions rated with that engine. MPG is miles per US gallon. EPA ratings as of 2026-11-04. Natural Resources Canada ratings as of 2026-10-16. Contains information licensed under the Open Government Licence – Canada.
Engine oil
Engine oil viscosity grade of the 2013 BMW M6, per EPA fuel economy certification
4.4L
0W-30
This is the grade the maker certified the engine with, as EPA records it. It is not a reading of the owner's manual, and it gives no capacity or specification: check the manual or the oil filler cap before filling.