Recalls that may apply to the 2001 BMW F 650 GS
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 00V267000 | 2000-09-12. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY. VEHICLE DESCRIPTION: MOTORCYCLES. THE FUEL TANK IS EQUIPPED WITH A CARBON CANISTER WHICH HELPS CONTROL EVAPORATIVE EMISSIONS FROM THE FUEL SYSTEM. THIS CANISTER IS MOUNTED TO A METAL INSERT THAT IS INTEGRATED INTO THE TANK. DURING THE PRODUCTION PROCESS, THE THICKNESS OF THE FUEL TANK MATERIAL IN THE AREA OF THE INSERT MAY BE LESS THAN INTENDED. AS A RESULT, VEHICLE OPERATING CONDITIONS SUCH AS VIBRATION, HIGH TEMPERATURE, ETC., COULD RESULT IN THE FUEL TANK DEVELOPING A CRACK IN THE AREA OF THE INSERT. Built 2000-03-01 to 2000-07-31. |
|---|
| 2001113 | 2001-05-25. Brakes. On certain vehicles used under extreme off-road riding conditions, when the rear brake and the throttle are applied simultaneously in low gears, the rear brake caliper support may bend, leading to contact between the brake hose connecting piece on the rear caliper and the swing arm. As a consequence, brake fluid leakage from the caliper could occur, which could ultimately result in loss of rear braking capability. Correction: If the rear caliper support is not bent, it will be reinforced by means of a specially designed plastic block. If the support is found to be bent, the rear swing arm will be replaced by one with a reinforced support. The caliper and brake hose will be replaced if damaged. |
|---|
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.