WenmarOpen by Wenmar Pro

Service bulletins for the 2018 BMW 740e

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

225 on file from NHTSA, as of 2026-10-19.

By type

By component

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
SIB6608232023-05-15. Service bulletin. ELECTRICAL SYSTEM:ADAS:HUD:CAMERA/SENSOR; ELECTRICAL SYSTEM:ADAS:DRIVER MONITORING:CAMERA/SENSOR. Issues with the various functions of the camera-based driver assistance systems (KAFAS system) can possibly lead to following customer complaints: KAFAS camera system deactivates itself, due to system restrictions that are not clear to the customer KAFAS camera system cannot be activated due to system restrictions that are not clear to the customer Road signs are sporadically not detected.
B8414222023-05-01. Service bulletin. LANE DEPARTURE:LANE KEEP:NAVIGATION SYSTEM/SOFTWARE; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). Customer is shown an incorrect GPS location in the vehicle (i.e., Nav Map, coordinates).
B6504142022-12-12. Service bulletin. LANE DEPARTURE; UNKNOWN OR OTHER; AIR BAGS; SEATS:BARRIERS; BACK OVER PREVENTION. According to the customer, the airbag warning light was on, but it may not be illuminated when the vehicle arrives in the workshop. 1. ACSM fault code "930A60 - Seat occupancy detection, front passenger; malfunction" is stored. The fault may or may not currently be present. Or 2. ACSM fault code "930A1C - Front passenger seat occupancy detection transmitting fault(moisture)" is stored. The fault may or may not currently be present.
SIB6608202022-07-05. Service bulletin. ELECTRICAL SYSTEM:ADAS. The functionality of the right rear SRR sensor could be reduced which would display the "Driving Assistance" Check Control Message.
B0903212022-06-21. Service bulletin. BACK OVER PREVENTION:SOFTWARE. In some rare cases a customer vehicle might be excluded from one or more Remote Software Upgrade(RSU) campaigns. This SIB gives an overview how to identify these vehicles and how to proceed in case of a customer complaint.
B6615192022-05-16. Service bulletin. EQUIPMENT; LANE DEPARTURE; STEERING. The steering intervention for Lane Departure Warning (LDW) is too strong (severe), which can create an uncomfortable feeling for the driver. Background: Steering intervention helps keep the vehicle in the lane if the system detects that a lane marking has been crossed. The steering intervention can be noticed on the steering wheel and can be manually overridden at any time.
B3204202021-12-27. Service bulletin. BACK OVER PREVENTION. A groaning type noise is heard during the height adjustment.
B6629192021-04-26. Service bulletin. BACK OVER PREVENTION. TOP VIEW CAMERA IMAGE IS MISALIGNED: The top view image of the vehicle is misaligned when observed in the Control Information Display (CID).
B5203202021-04-26. Service bulletin. BACK OVER PREVENTION. RATTLING NOISE FROM THE FRONT HEADREST: A rattling noise can be heard coming from the front seat headrest.
B0901202021-04-26. Service bulletin. BACK OVER PREVENTION:SOFTWARE. BMW REMOTE SOFTWARE UPGRADE IS NOT OFFERED FOR INSTALLATION: The customer complains that the BMW Remote Software Upgrade (RSU) is not possible in his/her vehicle, though the Remote Software Upgrade menu is available in the vehicle and a download was performed by the vehicle or the BMW Connected App.
B6629192020-12-21. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM; EQUIPMENT. TOP VIEW CAMERA: The top view image of the vehicle is misaligned when observed in the Control Information Display (CID). When the vehicle is parked in a parking spot with line markings, it is clearly noticed in the CID that the lines are not parallel to the side of the vehicle. This may be noticed on either the driver side, passenger side or both.
B6617202020-12-21. Service bulletin. BACK OVER PREVENTION. SURROUND VIEW - PARKING VIEW IMAGES DISPLAYED INCORRECTLY: After programming and shifting into reverse, there may be various sporadic concerns regarding the rearview camera and the surround view (top view) camera images in the CID (Central Information Display).
B6608202020-11-23. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. SERVICE ACTION - REPLACE RIGHT REAR SHORT RANGE RADAR SENSOR (SRR): The functionality of the right rear SRR sensor could be reduced which would display the Driving Assistance Check Control Message.
B6615192020-09-14. Service bulletin. LANE DEPARTURE. LANE DEPARTURE WARNING - STEERING INTERVENTION TOO STRONG: The steering intervention for Lane Departure Warning (LDW) is too strong (severe), which can create an uncomfortable feeling for the driver. Background: Steering intervention helps keep the vehicle in the lane if the system detects that a lane marking has been crossed. The steering intervention can be noticed on the steering wheel and can be manually overridden at any time. Software error in the KAFAS (camera-based driver assistance system) control unit.
B2702202020-06-15. Service bulletin. LANE DEPARTURE; WHEELS. JERKING OR SHUDDERING FROM THE DRIVELINE (XDRIVE TRANSFER CASE ATX13-X): There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages. CAUSE Unevenly worn or incorrect fitment tires are installed on the vehicle or the factory-filled transfer case oil does not meet BMW specifications.
B6610202020-05-18. Service bulletin. LANE DEPARTURE: SENSING SYSTEM: CAMERA; FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. KAFAS04 (CAMERA-BASED DRIVER ASSISTANCE SYSTEMS) LIMITATIONS: Various functions of the KAFAS (without radar installed) are not operating up to customer expectations.
B6608172020-04-27. Service bulletin. EQUIPMENT; BACK OVER PREVENTION. REAR VIEW CAMERA FAILS TO DISPLAY IMAGE: This Service Information Bulletin (Revision 6) replaces SI B66 08 17 dated January 2020. Sporadically when the rear view camera is activated no image appears in the display. The rear view camera can be activated by either: 1. Selecting reverse with the shift selector 2. Camera activation via the button on the center console Camera function returns after a terminal change.
B6505202020-04-20. Service bulletin. FORWARD COLLISION AVOIDANCE; LANE DEPARTURE; AIR BAGS. FAULT 930C1E IS FOUND IN THE ACSM: Vehicle comes into the workshop with the following illuminated: Check Engine Light DSC warning lamp Air bag warning lamps During diagnosis the following fault code is found stored in the ASCM (Advanced Crash Safety Module): 930C1E internal ECU error If the fault is cleared it returns immediately. The root cause is under investigation.
B3405172020-04-20. Service bulletin. BACK OVER PREVENTION; SERVICE BRAKES, HYDRAULIC; WHEELS; POWER TRAIN. TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: This Service Information Bulletin (Revision 3) replaces SI B34 05 17 dated September 2017. Ticking noise coming from front wheel while cornering without brakes applied noticeable at low speeds. The vehicle must be moving. See attached video V34 01 20 Note: For a similar noise heard when parking with the brakes applied refer to SIB 31 01 12. Microscopic movement of the contact interface between the inner brake disc and the wheel bearing flange on vehicles equipped with lightweight brake discs.
B6631192020-03-16. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM. REARVIEW CAMERA. SPORADICALLY NO IMAGE IS DISPLAYED: This Service Information Bulletin (Revision 1) replaces SI B66 31 19 dated October 2019. When reverse gear is selected or the rear view camera is activated sporadically no image is displayed on the Central Information Display (CID). If the ignition is cycled off and back on the function is restored. Software error between the head unit and the rear-view camera.
B6608172020-02-18. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM:SOFTWARE. REAR VIEW CAMERA FAILS TO DISPLAY IMAGE: This Service Information Bulletin (Revision 5) replaces SI B66 08 17 dated March 2018. Sporadically when the rear view camera is activated no image appears in the display. The rear view camera can be activated by either: 1. Selecting reverse with the shift selector 2. Camera activation via the button on the center console Camera function returns after a terminal change. Note: This error situation can rarely if ever be duplicated on demand. Head-unit interface software start-up synchronization error for the rear view camera.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.