Service bulletins for the 2017 BMW 540i
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
443 on file from NHTSA, as of 2026-10-19.
By type
By component
Only bulletins with component: Software are shown. Show all
| B090221 | 2023-07-24. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. With the introduction of the BMW Remote Software Upgrade, all Service Pack 18 vehicles and partial Service Pack 15 vehicles may receive new functionality or modifications in their features. |
|---|---|
| B620322 | 2022-12-12. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM:SOFTWARE. After programming, the customer may complain that the Sport Mode display is not fully displayed in the instrument cluster. Instead of a red background in sport mode, the background is displayed in blue (like ECO PRO mode). |
| SIB090121 | 2022-07-18. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE; ELECTRICAL SYSTEM:SOFTWARE. BMW offers a new special ISTA Installation made available for Roadside Assistance / Mobile Service technicians. The new ISTA Version is also able to be used in case of a Remote Software Upgrade (RSU) programming failure to get the customer car reprogrammed on site. In case of a Remote Software Upgrade failure, the engine start is prevented for safety reasons until the vehicle is programmed correctly. Most of the errors occur when only one control unit fails to program correctly. |
| B620222 | 2022-05-31. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Sport mode is not displayed correctly in the instrument cluster. Instead of a red background in sport mode, the background is displayed in blue (like in Eco Pro mode). Software in the instrument cluster (Kombi). |
| B611621 | 2021-12-20. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. The "energy management" Check control message (ID code 415) is falsely displayed when entering the vehicle. |
| SIB120421 | 2021-12-13. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. A software optimization affecting vehicle performance has been made available. |
| SIB 62 03 21 | 2021-10-25. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ENGINE AND ENGINE COOLING. When the vehicle is operated in Sport Mode, the engine speed is no longer displayed in the BMW Head-Up Display (HUD). |
| B651121 | 2021-08-09. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT ADAPTIVE/MOBILITY. SiriusXM satellite radio is not working and does not display a channel list. |
| B620221 | 2021-08-09. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; ELECTRICAL SYSTEM:SOFTWARE. The total electrically driven miles are lost/reset after the vehicle is programmed. This does not affect the total vehicle odometer reading. |
| B610421 | 2021-08-09. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT; ENGINE. The customer may complain of a check control message stating "Safe share detected" (CCM-ID 953). Check control message can be verified by checking key reader information or performing the Check control message history service function. |
| B340121 | 2021-02-22. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). DYNAMIC STABILITY CONTROL (DSC) UNIT DOES NOT RESPOND AFTER PROGRAMMING: After programming the vehicle using ISTA, the DSC control unit does not respond. Or: In the case of a BMW Remote Software Upgrade, the customer gets a Check Control message: "BMW Remote Software Upgrade failed. Vehicle is not operational. Please call BMW Roadside Assistance." |
| B652020 | 2021-02-01. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM:SOFTWARE. ?PROGRAM HEAD UNIT: Satellite radio content is not available over IP, this does not affect channels received over satellite. |
| B840420 | 2020-08-31. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. SERVICE ACTION - PROGRAM TELEMATICS MODULE: A software error in the telematics control unit can result in an interruption in communication between the vehicle and the back end (BMW server). Software error in the Advanced Telematics Module (ATM). |
| B651220 | 2020-08-31. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. BMW CONNECTEDDRIVE APPS ARE NO LONGER AVAILABLE AFTER PROGRAMMING: After programming vehicle with "20-03" software, BMW ConnecedDrive apps are no longer available in the head unit. Software in the Head Unit High (HU-H3). |
| B650709 | 2020-08-31. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. NAVIGATION SYSTEM - REPORTING MISSING OR INCORRECT ROADMAP DATA: Do not replace parts and do not program the vehicle. Roads can change by up to 15% every year. To ensure the best navigation experience, we do everything in our power to create the best maps. Your reports help us to detect changes in your area and keep future versions of our maps as accurate as possible. Therefore, a road map error or missing data must be reported directly to the map supplier. |
| B620120 | 2020-08-31. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. SERVICE ACTION - PROGRAM THE INSTRUMENT CLUSTER: The Condition Based Service (CBS) data concerning the due date for the brake fluid change may be displayed incorrectly. Software error in the Instrument Cluster (KOMBI). |
| B660817 | 2020-02-18. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM:SOFTWARE. REAR VIEW CAMERA FAILS TO DISPLAY IMAGE: This Service Information Bulletin (Revision 5) replaces SI B66 08 17 dated March 2018. Sporadically when the rear view camera is activated no image appears in the display. The rear view camera can be activated by either: 1. Selecting reverse with the shift selector 2. Camera activation via the button on the center console Camera function returns after a terminal change. Note: This error situation can rarely if ever be duplicated on demand. Head-unit interface software start-up synchronization error for the rear view camera. |
| B650520 | 2020-02-18. Service bulletin. AIR BAGS; ELECTRICAL SYSTEM:SOFTWARE. FAULT 930C1E IS FOUND IN THE ACSM: Vehicle comes into the workshop with the following illuminated: Check Engine Light DSC warning lamp Air bag warning lamps During diagnosis the following fault code is found stored in the ASCM (Advanced Crash Safety Module): 930C1E internal ECU error If the fault is cleared it returns immediately. The root cause is under investigation. |
| B651419 | 2019-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. HEAD UNIT NBT EVO (HU-H2) PROGRAMMING ABORT: The CID screen may light up blue. When this occurs A battery reset is not successful in restoring head unit operation Software error in the Bootloader file (BTLD) of the head unit. |
| B662319 | 2019-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. DRIVERS ASSISTANCE SYSTEM: CHECK CONTROL MESSAGE IS DISPLAYED. The Driver Assistance System limited warning message is displayed. |
| B123018 | 2019-08-19. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. ERRONEOUS FAULT 1F2505 IS STORED IN THE DME This Service Information bulletin replaces SI B12 30 18 dated November 2018. This fault does not cause any drivability complaints or engine warning lamps. |
| B651419 | 2019-07-22. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. HEAD UNIT NBT EVO (HU-H2) PROGRAMMING ABORT. During programming several aborts can occur in the head unit NBT EVO (HU-H2). |
| B340819 | 2019-06-24. Service bulletin. ENGINE; ELECTRICAL SYSTEM:SOFTWARE; FORWARD COLLISION AVOIDANCE. VARIOUS CHECK CONTROL MESSAGES FOR DRIVER ASSISTANCE SYSTEMS. The following messages are displayed in the Check Control (CC) display: Continued driving possible. Driving stabilization. Driving stabilization restricted driving stabilization. Drive with caution to the nearest authorized BMW Service workshop and/or Collision warning/you can continue driving. Collision warning fully or partially failed. No warning is given if the distance from the vehicle in front is too short. |
| B122019 | 2019-06-24. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:SOFTWARE. DELIVERY STOP: PROGRAM CONTROL UNITS (DME). A Delivery Stop has been issued (effective May 16 2019) on certain Model Year 2016-2020 BMW vehicles that have been produced between June 19 2015 and April 17 2019. A software error within the Digital Motor Electronics (DME) may cause a miscalculation of an onboard diagnostic (OBD) function. All vehicles will need a software update (no parts required). |
| B121619 | 2019-06-24. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:SOFTWARE. ERRONEOUS ELECTRIC FAN FUNCTION FAULT STORED IN THE DME. The following faults may be erroneously stored in the Digital Motor Electronics (DME): And: There is no customer-facing vehicle symptom(s) or related check control message displayed. A software error may cause these faults to be erroneously stored in the Digital Motor Electronics (DME). |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.