WenmarOpen by Wenmar Pro

Service bulletins for the 2018 BMW 530i

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

406 on file from NHTSA, as of 2026-10-19.

By type

By component

By topic

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
B6603202020-04-27. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. DIAGNOSTIC HINT: DRIVING ASSISTANCE SUPPORT REDUCED CHECK CONTROL MESSAGE DISP: Driving Assistance support reduced Check Control Message (CCM) is displayed sporadically. All or some of the system functions maybe inoperative.
B6508202020-04-20. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; EQUIPMENT. DISPLAYS SPORADICALLY REACT VERY SLOWLY WHEN SCROLLING IN THE AUDIO MENU: Sporadically the reaction time of the display in the instrument cluster the head-up display or in the CID (Central Information Display) is very long. This can occur when browsing/scrolling through lists in the audio menu switching radio stations or albums. Software in the Head Unit High (HU-H3).
B6304182020-04-20. Service bulletin. AIR BAGS; EXTERIOR LIGHTING; ELECTRICAL SYSTEM. DAYTIME RUNNING LIGHT IS DIM OR DISCOLORED: This Service Information Bulletin (Revision 2) replaces SI B63 04 18 dated January 2019. One or more of the LED daytime running lights are dim or discolored. The connection between the LED module and light tube inside the headlight is damaged.
B6105202020-03-16. Service bulletin. ELECTRICAL SYSTEM. CCM DISPLAYED "INCREASED BATTERY DRAIN" CAUSED BY CONTROLLER. A yellow CCM (Check Control Message) ID 415 is displayed- "Increased battery drain! // Battery. Electrostatic discharge at standstill / start engine. Energy management" The results of the Energy Diagnosis test plan identifies the Controller as the root cause of the CCM. The Controller delays the vehicle going to sleep by up to 6 minutes. In some cases this will cause the CCM 415 to be displayed when starting the vehicle. Replacing the Controller in this case will not correct this situation.
B8402202020-02-18. Service bulletin. ELECTRICAL SYSTEM. REMOTE 3D VIEW NOT AVAILABLE: Remote 3D View cannot be launched In the BMW ConnectedDrive App. Software error in the Advanced Telematics Module 2 (ATM2).
B8401202020-02-18. Service bulletin. ELECTRICAL SYSTEM. BMW CONNECTEDDRIVE SERVICES ARE NOT AVAILABLE: The BMW ConnectedDrive services are not available for an extended period. This may include: Calls in the BMW Assistance app (Concierge Service) Vehicle data and status in the BMW ConnectedDrive app Remote services Remote 3D View Real Time Traffic Information (RTTI) Weather News Software error in Advanced Telematics Module 2 (ATM2).
B6608172020-02-18. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM:SOFTWARE. REAR VIEW CAMERA FAILS TO DISPLAY IMAGE: This Service Information Bulletin (Revision 5) replaces SI B66 08 17 dated March 2018. Sporadically when the rear view camera is activated no image appears in the display. The rear view camera can be activated by either: 1. Selecting reverse with the shift selector 2. Camera activation via the button on the center console Camera function returns after a terminal change. Note: This error situation can rarely if ever be duplicated on demand. Head-unit interface software start-up synchronization error for the rear view camera.
B6505202020-02-18. Service bulletin. AIR BAGS; ELECTRICAL SYSTEM:SOFTWARE. FAULT 930C1E IS FOUND IN THE ACSM: Vehicle comes into the workshop with the following illuminated: Check Engine Light DSC warning lamp Air bag warning lamps During diagnosis the following fault code is found stored in the ASCM (Advanced Crash Safety Module): 930C1E internal ECU error If the fault is cleared it returns immediately. The root cause is under investigation.
B6209192020-01-21. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. INSTRUMENT CLUSTER REMAINS DARK AFTER STARTING THE VEHICLE: Instrument cluster remains dark after starting the vehicle. After a restart normal functionality is restored. Software error in the KOMBI (Instrument Cluster).
B1203192020-01-21. Service bulletin. ELECTRICAL SYSTEM. ENGINE DOES NOT START BELOW FREEZING TEMPERATURES: Engine designation correction Parts availability Warranty. The engine will not start at temperatures below freezing. The starter does not turn and engage.
B6510192019-12-16. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. ENGINE SPEED DEPENDENT NOISE DURING AUDIO PLAYBACK: Integration level updated. There is an engine speed-dependent noise heard through the speakers during audio playback. Software error in the Receiver Audio Module (RAM) control unit.
B6201192019-12-16. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. INSTRUMENT CLUSTER AND ONBOARD COMPUTER INTERMITTENTLY INOPERATIVE: Instrument Cluster (KOMBSP18) functions are intermittently inoperative including: On-board Computer (BC) button on turn signal stalk (BC button shown at left) Radio displays Menu button Turn signal displays Arrows on multifunction steering wheel MFL thumbwheel control.
B6514192019-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. HEAD UNIT NBT EVO (HU-H2) PROGRAMMING ABORT: The CID screen may light up blue. When this occurs A battery reset is not successful in restoring head unit operation Software error in the Bootloader file (BTLD) of the head unit.
B6112192019-10-21. Service bulletin. ELECTRICAL SYSTEM. DELIVERY STOP: REPLACE THE GEAR SELECTOR SWITCH: The functional lighting and/or locator lighting on the Shifter selector lever (GWS) may flicker over time or intermittently not illuminate. The GEAR SELECTOR SWITCH may not have been produced to specifications.
B6623192019-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. DRIVERS ASSISTANCE SYSTEM: CHECK CONTROL MESSAGE IS DISPLAYED. The Driver Assistance System limited warning message is displayed.
B1230182019-08-19. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. ERRONEOUS FAULT 1F2505 IS STORED IN THE DME This Service Information bulletin replaces SI B12 30 18 dated November 2018. This fault does not cause any drivability complaints or engine warning lamps.
B6619192019-07-22. Service bulletin. ELECTRICAL SYSTEM. COMFORT ACCESS AND COMFORT GO NOT POSSIBLE. Vehicle cannot be opened/locked or started via Comfort Access. Electrostatic charge puts the remote control key into a deep sleep.
B6514192019-07-22. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. HEAD UNIT NBT EVO (HU-H2) PROGRAMMING ABORT. During programming several aborts can occur in the head unit NBT EVO (HU-H2).
B3206192019-07-22. Service bulletin. ELECTRICAL SYSTEM. VARIOUS CHECK CONTROL MESSAGES FOR DRIVER ASSISTANCE SYSTEMS.
B1801192019-07-22. Service bulletin. ELECTRICAL SYSTEM. NITROGEN OXIDE SENSOR FAULTS. The Service Engine Soon (MIL) is illuminated and one or more of the following fault codes are stored in the DDE.
B1221192019-07-22. Service bulletin. ELECTRICAL SYSTEM:IGNITION:SWITCH. HIGH ENGINE SPEED IMMEDIATELY AFTER STARTING. In rare circumstances after the engine is started with the Start-Stop button the engine speed may immediately increase to a high constant RPM (approximately 3000 rpm).
B6106192019-06-24. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; EQUIPMENT. HIGH VOLTAGE DIAGNOSTIC SPECIALIST TRAINING AND EQUIPMENT STRATEGY. INFORMATION The ST1821 High Voltage Diagnostic Specialist Certification (HVS) is the next step in the E-mobility service strategy for BMW technicians.
B3408192019-06-24. Service bulletin. ENGINE; ELECTRICAL SYSTEM:SOFTWARE; FORWARD COLLISION AVOIDANCE. VARIOUS CHECK CONTROL MESSAGES FOR DRIVER ASSISTANCE SYSTEMS. The following messages are displayed in the Check Control (CC) display: Continued driving possible. Driving stabilization. Driving stabilization restricted driving stabilization. Drive with caution to the nearest authorized BMW Service workshop and/or Collision warning/you can continue driving. Collision warning fully or partially failed. No warning is given if the distance from the vehicle in front is too short.
B1220192019-06-24. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:SOFTWARE. DELIVERY STOP: PROGRAM CONTROL UNITS (DME). A Delivery Stop has been issued (effective May 16 2019) on certain Model Year 2016-2020 BMW vehicles that have been produced between June 19 2015 and April 17 2019. A software error within the Digital Motor Electronics (DME) may cause a miscalculation of an onboard diagnostic (OBD) function. All vehicles will need a software update (no parts required).
B1216192019-06-24. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:SOFTWARE. ERRONEOUS ELECTRIC FAN FUNCTION FAULT STORED IN THE DME. The following faults may be erroneously stored in the Digital Motor Electronics (DME): And: There is no customer-facing vehicle symptom(s) or related check control message displayed. A software error may cause these faults to be erroneously stored in the Digital Motor Electronics (DME).

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.