Service bulletins for the 2020 BMW 330i
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
306 on file from NHTSA, as of 2026-10-19.
By type
By component
| B610419 | 2020-07-27. Service bulletin. ELECTRICAL SYSTEM. VEHICLE DOES NOT START BATTERY TOTALLY DISCHARGED: The customer's vehicle does not start due to a totally discharged battery. |
|---|---|
| B340320 | 2020-07-27. Service bulletin. ENGINE AND ENGINE COOLING; SERVICE BRAKES, HYDRAULIC. PREMATURE WEAR OF THE REAR AXLE BRAKE PADS WITH STANDARD BRAKES: The CBS data and Check Control (CC) message shows the rear axle brake pads are worn, and the vehicle has less than 15,500 miles. Increased residual braking forces in the rear axle brake calipers caused by production-related deviations on the surface of the piston ring seal. |
| B661120 | 2020-06-15. Service bulletin. ELECTRICAL SYSTEM. REVERSING ASSISTANT LIMITATIONS: The Reversing Assistant function is not operating to customer expectations. Some possible customer concerns are: Vehicle does not avoid objects in its path tires or wheels contact the curb reversing Assistant only works for a short distance. |
| B660920 | 2020-06-15. Service bulletin. ELECTRICAL SYSTEM. SURROUND VIEW WRONG VEHICLE DISPLAYED AFTER PROGRAMMING: After programming the wrong vehicle model is displayed in the Central Information Display (CID) when the Surround View is activated. |
| B610520 | 2020-06-15. Service bulletin. ELECTRICAL SYSTEM. CCM DISPLAYED "INCREASED BATTERY DRAIN" CAUSED BY CONTROLLER: A yellow CCM (Check Control Message) ID 415 is displayed- "Increased battery drain! // Battery. Electrostatic discharge at standstill / start engine. Energy management" The results of the Energy Diagnosis test plan identifies the Controller as the root cause of the CCM. The Controller delays the vehicle going to sleep by up to 6 minutes. In some cases this will cause the CCM 415 to be displayed when starting the vehicle. Replacing the Controller in this case will not correct this situation. |
| B511318 | 2020-06-15. Service bulletin. VISIBILITY; ELECTRICAL SYSTEM; POWER TRAIN. LIN BUS FAULTS WITH EXTERIOR REARVIEW MIRROR GLASS DAMAGE: Any or all of these conditions may be present: A. The exterior rearview mirror glass is discolored or cracked B. The power windows and folding mirrors may not operate C. One or more of the following LIN bus faults are stored in the BDC (Body Domain Controller): D90C03 LIN bus master B: short circuit - BDC D90C04 LIN bus master B: No communication - BDC D90C05 LIN bus master B: Communication failed - BDC D90D07 Operating facility switch block (LIN): Missing LIN slave D90D0A exterior rearview mirror left (LIN bus): Absent LIN slave - BDC D90D0D exterior rearview mirror right (LIN bus): Absent LIN slave - BDC 804246 exterior rearview mirror left (LIN bus): Heating or electrochrome: faulty - BDC 804256 exterior rearview mirror right (LIN bus): Heating or electrochrome: faulty - BDC 804265 exterior mirror left or right: Excess temperature - BDC 804260 exterior mirror left or right: Overvoltage - BDC 804261 exterior mirror left or right: Undervoltage - BDC Faulty exterior rearview mirror electronics have created a short on the LIN bus damaging the mirror glass and causing functional errors in power window and exterior mirror operation. |
| B270220 | 2020-06-15. Service bulletin. LANE DEPARTURE; WHEELS. JERKING OR SHUDDERING FROM THE DRIVELINE (XDRIVE TRANSFER CASE ATX13-X): There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages. CAUSE Unevenly worn or incorrect fitment tires are installed on the vehicle or the factory-filled transfer case oil does not meet BMW specifications. |
| B130420 | 2020-06-15. Service bulletin. ENGINE AND ENGINE COOLING. TANK VENTILATION AND MIXTURE CONTROL FAULTS STORED IN THE DME: The Engine Malfunction Warning is illuminated and one or more of the following faults are stored in the DME. All models: FC 191C02 - Fuel tank ventilation system 2nd discharge point: malfunction FC 195014 - Differential pressure sensor tank vent valve signal: fixed FC 118001 - Mixture control: mixture too lean FC 118401 - Mixture control: mixture too lean large deviation I01 only: FC 124103 - Mixture control: mixture too lean FC 124101 - Mixture control: Mixture lean large deviation CAUSE Internal mechanical defect in the tank ventilation valve. The defect can also result in a very loud clicking noise when the valve is cycling. |
| B120820 | 2020-06-15. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. DELIVERY STOP - STARTER MOTOR: BMW AG has issued a Delivery Stop on a small number of Model Year 2020 BMW 3 Series that were produced between March 6 2020 and March 11 2020. A starter motor nut will need to be inspected and if necessary tightened to specifications. |
| B110120 | 2020-06-15. Service bulletin. ENGINE. B58C AND B58M ENGINES ENGINE OIL FILTER INSERT IS DIFFICULT TO REMOVE - REMOVAL: On rare occasions during an engine oil service the BMW Original (Genuine) engine oil filter insert is either difficult to remove or breaks apart in the oil filter housing. The engine oil filter is broken. The paper is torn and the lower plastic section is stuck in the engine oil filter housing. |
| B000920 | 2020-06-15. Service bulletin. EQUIPMENT. DELIVERY STOP - REPLACE OWNER'S MANUAL This Service Information Bulletin (Revision 1) replaces SI B00 09 20 dated May 2020. BMW AG has issued a Delivery Stop (effective May 5 2020) on a small number of Model Year 2021 BMW 3 Series Plug-in Hybrid Electric Vehicles (PHEV) that were produced between March 2 2020 and March 18 2020. Do not deliver to a customer a New Certified Pre-Owned or Used vehicle subject to a Delivery Stop until the vehicle is repaired. Do not use or sell replacement equipment/parts subject to a Delivery Stop. The improper owner's manual (aka handbook) was included with the vehicle. Inaccurate weight information is listed. |
| B840220 | 2020-05-18. Service bulletin. ELECTRICAL SYSTEM. REMOTE 3D VIEW NOT AVAILABLE: Remote 3D View cannot be launched In the BMW ConnectedDrive App. Software error in the Advanced Telematics Module 2 (ATM2). |
| B840120 | 2020-05-18. Service bulletin. ELECTRICAL SYSTEM. BMW CONNECTEDDRIVE SERVICES ARE NOT AVAILABLE: The BMW ConnectedDrive services are not available for an extended period. This may include: Calls in the BMW Assistance app (Concierge Service) Vehicle data and status in the BMW ConnectedDrive app Remote services Remote 3D View Real Time Traffic Information (RTTI) Weather News Software error in Advanced Telematics Module 2 (ATM2). |
| B661020 | 2020-05-18. Service bulletin. LANE DEPARTURE: SENSING SYSTEM: CAMERA; FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. KAFAS04 (CAMERA-BASED DRIVER ASSISTANCE SYSTEMS) LIMITATIONS: Various functions of the KAFAS (without radar installed) are not operating up to customer expectations. |
| B660820 | 2020-05-18. Service bulletin. ELECTRICAL SYSTEM. SERVICE ACTION - REPLACE RIGHT REAR SHORT RANGE RADAR SENSOR (SRR): The functionality of the right rear SRR sensor could be reduced which would display the Driving Assistance Check Control Message. |
| B660720 | 2020-05-18. Service bulletin. ELECTRICAL SYSTEM. SERVICE ACTION - REPLACE LEFT REAR SHORT RANGE RADAR SENSOR (SRR): The functionality of the left rear SRR sensor could be reduced which would display the Driving Assistance Check Control Message. |
| B611420 | 2020-05-18. Service bulletin. ELECTRICAL SYSTEM. DEACTIVATION OF THE INTERIOR MOVEMENT DETECTOR/TILT ALARM SENSOR IS NOT POSSIBLE: Customer complains that the interior movement detector and the tilt alarm sensor system cannot be deactivated by pressing the lock button on the remote control / BMW display key twice. The second button press on the radio remote control / BMW display key is not detected. Customer may have to press the button 3 times to deactivate the interior movement detector and tilt alarm sensor. CAUSE Software error in the control unit of the roof function center (FZD). |
| B611320 | 2020-05-18. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. SERVICE ACTION - CHECKING THE DUAL STORAGE SYSTEM AND REPLACE IF NECESSARY: In the event of an accident the two-battery Dual Storage System (DSS) is disconnected from the electrical system via an internal relay. In some cases the relay is stuck closed and a fault is set. In these circumstances: A crash shutdown of the DSS does not occur The power distribution box is supplied with power until the DSS is fully discharged |
| B611120 | 2020-05-18. Service bulletin. STRUCTURE; LATCHES/LOCKS/LINKAGES. WHEN LOCKING VEHICLE DOORS ARE LOCKED BUT VEHICLE IS NOT SECURED: The customer complains that when locking the vehicle from the outside using the remote control: The doors lock The alarm system is not activated The side mirrors (when the function is activated) do not fold in CAUSE Due to a software error on the Body Domain Controller (BDC) it identified the remote control as being inside even though the remote control is actually located outside the vehicle. This caused the doors to be locked without securing the vehicle. |
| B511420 | 2020-05-18. Service bulletin. EQUIPMENT. RATTLE NOISE FROM DASHBOARD CENTER SPEAKER COVER: A rattle noise is present from the dashboard's center speaker cover. This may only occur during phone calls or with certain volumes/tones of music. Interference between the dashboard speaker cover and the dashboard. |
| B340220 | 2020-05-18. Service bulletin. ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). NOTICEABLE JERK WHEN DRIVING OFF IN ACTIVE CRUISE CONTROL (ACC) MODE: A noticeable jerk can be felt at 2-3 mph when driving off in ACC mode. Software in the Dynamic Stability Control (DSC) unit. |
| B130320 | 2020-05-18. Service bulletin. ENGINE. DELIVERY STOP - REPLACE HIGH-PRESSURE PUMP: Due to an assembly error the flange bolts for the high-pressure pump did not have the proper tightening torque applied. |
| B840214 | 2020-04-27. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. CONNECTEDDRIVE/BMW ASSIST SYSTEM DIAGNOSIS INFORMATION: This Service Information Bulletin (Revision 7) replaces SI B84 02 14 dated May 2019. ConnectedDrive/BMW Assist features are partially or completely inoperative. This Service Information Bulletin: Is being published because vehicles are down for an extended period of time when researching system failures with ConnectedDrive or BMW Assist. Will assist you both in identifying the issue and providing technical support. CAUSE Not enough information is available for BMW NA engineers to assist the technician in diagnosing the root cause. |
| B663119 | 2020-04-27. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; POWER TRAIN:MANUAL TRANSMISSION:SHIFT PATTERN INDICATOR. REARVIEW CAMERA: SPORADICALLY NO IMAGE IS DISPLAYED: This Service Information Bulletin (Revision 2) replaces SI B66 31 19 dated February 2020. When reverse gear is selected or the rear view camera is activated sporadically no image is displayed on the Central Information Display (CID). If the ignition is cycled off and back on the function is restored. Software error between the head unit and the rear-view camera. |
| B661919 | 2020-04-27. Service bulletin. EQUIPMENT:ELECTRICAL; LATCHES/LOCKS/LINKAGES. COMFORT ACCESS AND COMFORT GO NOT POSSIBLE: This Service Information Bulletin (Revision 1) replaces SI B66 19 19 dated May 2019. Vehicle cannot be unlocked/locked or started via Comfort Access. Remote control functionality is restored by pressing any of the key buttons or by removing and reinstalling the remote control key battery. The Display Key Digital Key and the Digital Key Card are not affected. Electrostatic discharge puts the remote control key into a deep sleep. Various situations can lead to an electrostatic charge which is often not recognized by the customer. For example walking over carpet wearing shoes that have a hard rubber sole positive and negative charges are exchanged. The sole accumulates a negative charge and an electrostatic charge develops before touching the remote control key. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.