Service bulletins for the 2020 Bentley Continental
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
905 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
| 2052496/3 | 2020-11-06. Service bulletin. ELECTRICAL SYSTEM. New Continental GT - Spurious Mood lighting DTCs. Customer statement / workshop findings: Upon interrogation of the vehicle fault memory spurious DTCs can be logged in 09 Central Electrics relating to the Mood lighting system The lamp is fully functional and there is no customer complaint Technical background: The DTCs are currently under investigation within the factory |
|---|---|
| 2052208/5 | 2020-11-06. Service bulletin. STRUCTURE; LATCHES/LOCKS/LINKAGES. New Continental GT - Ski hatch difficult to latch/unlatch. Customer statement / workshop findings: The ski hatch lock is difficult to unlock and lock, the remote control key blade feels like it is jammed and cannot be turned easily or cannot be turned at all when inserted into the ski hatch lock Technical background: Due to tight tolerances the ski hatch mechanism fouls the upper ski hatch trim when closed/locked. The close proximity of the mechanism in relation to the hatch trim when closed/locked can create difficulty in opening/unlocking the hatch In the event the hatch cannot be unlocked/opened and the key is jammed, refer to Measure section - procedures 1 and 2 Refer to procedure 2 only if the ski hatch is open or can be opened |
| 2052092/4 | 2020-11-06. Service bulletin. ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES. New Continental GT - Door 'soft close' functionality. Customer statement / workshop findings: Correct functionality and restrictions of the door soft close system need to be understood to prevent unnecessary customer complaints |
| 2051726/4 | 2020-11-06. Service bulletin. SERVICE BRAKES, HYDRAULIC. New Continental GT brake squeal. Customer statement / workshop findings: Possible brake squeal in certain conditions. Technical background: A dynamically adjusted high-performance brake system is fitted on the new Continental GT for a high braking performance and an appropriate pedal feel. As a result of this braking performance brake noises or vibrations from the brake system cannot be completely ruled out under certain unfavourable environmental or driving conditions. Measure: Upon customer complaint, raise a DISS technical query and provide a noise recording using Chassis Ear Kit WT 10437 |
| 2060652/2 | 2020-11-06. Service bulletin. STRUCTURE:BODY:TRUNK LID; ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES. New Continental GT - Boot open/close function inoperative. Customer statement / workshop findings: Boot operational issues for example: The boot does not open or close as expected Technical background: VERY IMPORTANT: Please ensure all VIN applicable TPIs and VIN applicable Service Campaigns are checked and conducted prior to conducting the instructions within this TPI NOTE: The operative MUST submit the following information to a new DISS query or an existing query relating to boot operational issues Completed check list Images of the vehicle condition - In particular the boot area (Ensure license plate and VIN details are not visible) Video of the failure NOTE: Please capture the rear of the vehicle for at least one open/close operation (when possible) before zooming or moving in closer to the issue, the video MUST be recorded in a quiet environment Battery health - Print out of the results NOTE: Please ensure any other findings or issues relating to the boot are clearly described within the DISS query |
| 2051712/5 | 2020-11-06. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:PROPULSION SYSTEM: CABLES. New Continental GT 48V anti-roll bar cable routing. Customer statement/workshop findings: The 48 volt electrical supply cable looks as if it is trapped between the cross brace and transmission heat shield but is the correct condition. Measure: The 48 volt supply cable (1 ) to the anti-roll bar may appear to be trapped between the front subframe and the engine undersheet (arrows). See Figure 1.ectrical supply cable looks as if it is trapped between the cross brace and transmission heat shield but is the correct condition |
| 2060120/2 | 2020-11-06. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE; LATCHES/LOCKS/LINKAGES:HOOD:LATCH. Convertible hood cannot close - Temporary repair solution - Header trim flap eyelet broken. Customer statement/workshop findings: Convertible hood cannot close/latch due to a broken eyelet. The eyelet is part of the header trim flap (Figure 1) Technical background: CAUTION: The Operative MUST ensure that all interior/exterior trim assemblies are suitably protected. Warranty payments will not be considered under any circumstances for any damage Option 1 - Manually assist the flap to allow the hood to fully close and latch as shown in the video within the Bentley Hub reference TPI 2060120/- Great care must be taken when conducting the manual assist procedure |
| 2055580/4 | 2020-11-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Rotating Display - Fault Diagnosis. Customer statement/workshop findings Various rotating display operational complaints or noises. Technical background Follow the measure section of this TPI that relates to your customer complaint. Measure: Follow the below instructions that relates to your customer complaint. |
| 2055846/3 | 2020-11-06. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Infotainment screen turns red sporadically. Customer statement/workshop findings: Infotainment screen turns red sporadically (Figure 1) Technical background: Refer to Measure section of this TPI |
| 2055772/3 | 2020-11-05. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Battery conditioner inoperative. Customer statement / workshop findings: Technical background: Corrosion on the contact surfaces of the charger socket and charger lead. If the charging socket or charger lead are wet when the charger is connected this can cause corrosion on the contacts. Measure: Check for corrosion on the contact surfaces of both the charger socket and charger lead. |
| 2053170/6 | 2020-11-05. Service bulletin. POWER TRAIN; EQUIPMENT; ENGINE; ELECTRICAL SYSTEM. Gear shift optimisation procedure - W12 TSI only. Customer statement / workshop findings: Customer reporting dissatisfaction with transmission shift quality in various driving conditions Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non- approved aftermarket modifications conducted including the modification of the engine control modules ( chip tuning) Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further repairs relating to the shift quality complaint Technical background: IMPORTANT: To allow the engine and transmission to adapt to the customers driving style the vehicle MUST either have covered at least 1000 miles/1600 Km or must have been used over a six week period (which ever occurs first) before carrying out the instructions within this TPI |
| 2059333/2 | 2020-11-05. Service bulletin. STRUCTURE:BODY:DOOR; ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES. Unable to open, or delay in opening the Drivers or Front passenger door from outside using the door handle (Keyless). Customer statement / workshop findings: Unable to open, or a delay in opening the driver or passenger front door from the outside of the vehicle when using the door handle (keyless entry) Technical background: In the event there is a customer complaint regarding the opening of the door from the outside of the vehicle when using the door handle (Keyless entry) please refer to the Measure section of this TPI |
| 2057947/3 | 2020-11-05. Service bulletin. TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS. TPMS Warning light - DTC U012700 evident. Customer statement / workshop findings Customer statement: Tyre pressure monitoring system warning light on within the DIP Technical background: DTC U012700 evident within Address 0019 Gateway Measure: 1) Replace the Tyre pressure control module and bracket (Figure 1) - Refer to Rep.Gr 44 |
| 2058411/2 | 2020-11-05. Service bulletin. EQUIPMENT; SEAT BELTS. Seat belt buckle stop button - Missing. Customer statement / workshop findings: Seat belt buckle stop button missing Technical background: The seat belt buckle stop button should be evident as shown in Figure 1 |
| 2051526/5 | 2020-11-04. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; STRUCTURE. Rotating screen alignment. Customer statement / workshop findings: The chrome brightware strip on the veneer face fascia panel of the Bentley Rotating Display (BRD) may appear to be misaligned with the chrome strips on the passenger and drivers side fascia panels. In addition, the gapping and fit between the veneer face fascia panel of the BRD and the passenger and drivers side fascia panels may differ from one side to the other. Technical background: The chrome brightware strip is fixed to the veneer face fascia panel with no separate adjustment and as such can appear to be misaligned. The veneer face fascia panel relies on fixed location pins that may be out of tolerance. Rework the veneer face fascia panel to align the chrome brightware strip and/or the gapping between the BRD and the passenger and drivers side fascia panels. |
| 2052349/5 | 2020-11-04. Service bulletin. AIR BAGS: AIR BAG/RESTRAINT CONTROL MODULE; SEAT BELTS; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. Front seatbelt - Diagnostic Trouble Codes - B130474 and/or B130574. Customer statement / workshop findings Diagnostic Trouble Codes (DTCs) evident in Address: 0015 System name: 15 - Airbag Control Module B130474: Left front seat belt tensioner control module Actuator deviated B130574: Right front seat belt tensioner control module Actuator deviated The DTCs can be evident if the occupant uses a dummy seat belt buckle, the occupant may use the dummy seat belt buckle to prevent a warning light or audible warnings Technical background Dummy seat belt buckles of any description MUST NOT be used under any circumstances, Figure 1 shows an example of a dummy seat belt buckle |
| 2058837/2 | 2020-11-04. Service bulletin. STEERING; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. DTC's C135DF0 and/or C12F000 evident within the Steering rack and power steering control unit (J500). Customer statement / workshop findings: DTC's C135DF0 and/or C12F000 evident within the Steering rack and power steering control unit (J500) Diagnostic address 44 Technical background: Refer to the Measure section of this TPI |
| 2060446/4 | 2020-11-04. Service bulletin. STEERING; WHEELS. Clicking noise from the front wheels when conducting a static lock to lock steering manoeuvre. Customer statement / workshop findings: Clicking noise from the front wheels whilst performing a static lock to lock steering manoeuvre Technical background: Verify that the customer complaint matches the video within the Bentley Hub Reference TPI Transaction number 2060446 |
| 2053428/4 | 2020-11-04. Service bulletin. POWER TRAIN. Vibration noise from the powertrain when park or neutral is selected. Customer statement / workshop findings: Vibration/Tizzing noise from the powertrain area when the vehicle is in Park or Neutral, the noise typically disappears in Drive Technical background: The noise is caused by contact between the transmission cooler pipes and the front subframe |
| 2051511/5 | 2020-11-03. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Mood lighting. Customer statement / workshop findings: Mood lighting strip fixed on one colour regardless of which colour scheme is selected or not illuminated at all. Technical background: Refer to the Measure section of this TPI |
| 2060596/2 | 2020-11-03. Service bulletin. POWER TRAIN; SERVICE BRAKES; ELECTRICAL SYSTEM. Transmission DTC - U040100 50273/C461 Invalid Data Received From ECM/PCM A. Customer statement / workshop findings: Diagnostic Trouble Code (DTC) U040100 50273/C461 Invalid Data Received From ECM/PCM "A" stored within the Transmission Control Unit. Technical background: During Adaptive Cruise Control (ACC) brake to stop events, it is possible for the brake pressure to decay at a rate outside of specified parameters, DTC - U040100 50273/C461 Invalid Data Received From ECM/PCM "A" will therefore be stored within the Transmission Control Unit. When the DTC is stored the Customer will not be aware, there will be no warning from the Driver Instrument Panel (DIP) and no effect on performance of the vehicle. |
| 2051519/7 | 2020-11-03. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; ELECTRICAL SYSTEM. HVAC operation issues/HVAC Motor defect DTCs logged. Customer statement/workshop findings: HVAC operation issue and HVAC motor defect (DTCs) evident within address 08 Climatronic control unit, the DTCs can be static or sporadic, for example: B108D09: Right temperature flap positioning motor - Component defect Technical background: The HVAC motor/s can become jammed causing HVAC operation issues. |
| 2054599/6 | 2020-11-03. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Headlamp operation issues. Customer statement / workshop findings: Headlamp operation issues Technical background: DTCs evident within the left light control unit (Diagnostic address D6) and/or the right light control unit (Diagnostic address D7) There are numerous static and intermittent DTCs which may be evident within the previously mentioned control units, ensure all steps within the Measure section are strictly adhered to |
| 2053351/6 | 2020-11-03. Service bulletin. ENGINE AND ENGINE COOLING. Buzzing noise from engine area. Customer statement / workshop findings Workshop findings: Buzzing noise heard at idle from the sump area when the vehicle is elevated on a workshop ramp. The noise cannot be heard from inside the cabin or outside of the vehicle in normal circumstances. Technical background: A buzzing noise can be generated by the oil pump when the engine is running at idle. |
| 2058423/4 | 2020-11-03. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. New Continental GT/GTC, New Flying Spur and Bentayga Speed - Low Oil Pressure Warning During Early Vehicle Life Customer statement/workshop findings: Warning on the Driver Instrument Panel (DIP) - Oil pressure too low DTCs relating to oil pressure may also be stored within the Master ECU. Diagnostic Trouble Codes (DTC) P052400: Engine Oil Pressure Too Low and/or P15AA00: Engine oil pressure -Lower limit not reached stored in the Master Engine Control Unit (ECU) Technical background: CAUTION: DO NOT CONTINUE WITH THIS DOCUMENT IF THE ENGINE EXHIBITS ANY ABNORMAL MECHANICAL NOISE OR HAS AN ENGINE LUBRICATING OIL LEAK SEEK FURTHER ADVICE THROUGH A NEW OR EXISTING DISS QUERY |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.