WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Bentley Continental

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

263 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
2029216/22020-03-03. Service bulletin. STRUCTURE. New Continental Convertible side window/s not fully closed Customer statement / workshop findings: With the engine not running, the hood can be raised from the stowage position and closed with no issues using the desired roof and window close functions (for example the roof control switch or keyless exit). However, when the side glass windows start to close a combination of one or more of the side windows do not fully close. During the close operation the side window/s appear to be closing as expected but as the glass gains contact with the hood and adjoining seals the window/s lower away from the contact sealing points resulting in the side window/s dropping partially down. The customer may also experience the same symptoms regarding the side windows not fully closing even when the hood has not been cycled, the windows when raised appear to be closing as expected, however when the contact sealing points are reached the side window/s drop partially down. Technical background: There are multiple ways the roof and windows can be closed with the engine not running, irrespective of which way has been selected by the operative, the expectation is that once the roof has fully closed the side windows should also fully close in one continuous motion. Should the symptoms be as described within the Customer statement section of this TPI the initial reaction may be to adjust the window settings, this is not necessary initially and at this point should not be carried out, it is imperative that the initial checks within the Measure section of this TPI are followed to determine the exact cause and appropriate next steps.
2058277/12020-02-08. Service bulletin. STRUCTURE. Customer statement / workshop findings In the event the insulation pad (ARROW - Figure 1) requires replacing, the onward instructions within this TPI must be followed. Technical background The right and left hand tension straps (Figure 2) are no longer fitted at the time of manufacture, the Measure section within this TPI details the procedure which must be followed to fit the tension straps.
2037971/12020-01-17. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE. Tonneau micro switch mounting bush orientation (SC14/21) Technical background: The tonneau position micro switch assembly is mounted to the vehicle via a brass bush encapsulated in the switch moulding this bush may have been inverted when the switch moulding was formed. When this is the case the switch will become detached from the mounting plate. Ultimately the convertible roof system will fail to operate. Remedy: The tonneau position micro switch assembly on all applicable vehicles should be inspected. A switch moulding found to be incorrectly manufacture should be replaced
2037493/32020-01-17. Service bulletin. STRUCTURE. GTC hood ram cover deletion (SC14/13) Technical background: A recently introduced cover fitted to the tonneau ram may clash with the hood mechanism and potentially cause the system to malfunction. Initial investigations have determined that this cover has to be removed until the cause of the clash is understood. Therefore the 8 cars currently fitted with this part should have the following operation performed before delivery to customer Remedy: Remove the plastic cover from both rams then over tape the ends of the ram with protective tape
2042462/12020-01-17. Service bulletin. STRUCTURE. Hood replacement - right hand C post headlining guide Customer statement / workshop findings: Convertible roof issue that requires replacement headlining or hood assembly Technical background: In the event that a headlining or hood assembly has to be replaced for any reason then the following guide piece should also be fitted. Fitting this additional guide to control the headlining in the vicinity of the right hand C post will preserve the aesthetic of the replacement headlining in that area
2041158/22020-01-17. Service bulletin. STRUCTURE. Bonnet vent spacer clarification and bonnet vent fixing/washer orientation (SC15/13) Technical background: Two checks are required relating to the bonnet vents they are as follows: 1. On a small amount of vehicles the spacer washers (as shown in Figure 1) which are fitted between the carbon vents and the bonnet may be missing, the scenario will be as follows a. No washers fitted at all (NOT OK) orb) a full set of washers fitted (OK) 2. The fastener and washer sequence securing the bonnet vent may be incorrect NOTE: The fixings/washers will require removing and replacing during the confirmation process relating to the presence of the vent washers Remedy: The 8 fasteners securing the bonnet vents for each applicable car should be removed to allow the inspection and clarification that the bonnet vent washers are fitted New fasteners and washers should be fitted in the sequence shown within the work section of this campaign
2042334/12020-01-17. Service bulletin. STRUCTURE; EQUIPMENT ADAPTIVE/MOBILITY. Gear knob loose Customer statement / workshop findings: Gearstick knob trimmed cap & / or gearstick knob trimmed body feels loose or is easily pulled apart from the gear lever assembly Technical background: The adhesive used to assemble the gearstick knob trimmed parts may not have been applied correctly
2056582/22020-01-09. Service bulletin. STRUCTURE. Condition: Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work Technical Background It is the retailers responsibility to check and confirm if there are any TPIs which are applicable to the customers complaint/issue if there is an applicable TPI available, apply it and complete a DISS complaint to include Workshop findings only (No repair query required). For correct diagnosis and repair the attached Flowchart must be followed in conjunction with the Measure section of this TPI
2040820-32019-04-22. Service bulletin. STRUCTURE. Vibration humming noise in the cabin from the front bulkhead
2052956-12019-02-19. Service bulletin. STRUCTURE; STRUCTURE:BODY. Rear bow casting replacement
204606112017-09-27. Service bulletin. STRUCTURE:BODY:DOOR. Door profile incorrect
204340622017-08-25. Service bulletin. EQUIPMENT; STRUCTURE:BODY:HOOD. Hood rear bow clash to tonneau cover - prevention (SC16/21) *Revised: VIN Updates
204340612017-02-09. Service bulletin. STRUCTURE; EQUIPMENT. HOOD REAR BOW CLASH TO TONNEAU COVER – PREVENTION (SC16/21)
204246222017-02-09. Service bulletin. EQUIPMENT; STRUCTURE. HEADLINER REPLACEMENT - RIGHT HAND C POST HEADLINER GUIDE
2044673/12016-10-26. Service bulletin. STRUCTURE:BODY:DOOR. NEW GT BOOT LID MOTOR INFORMATION REQUIRED
SB-2037493/42016-05-09. Service bulletin. STRUCTURE:BODY:HOOD. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2033745-2A2016-03-16. Service bulletin. STRUCTURE:BODY:TRUNK LID. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2033742-1A2016-03-16. Service bulletin. STRUCTURE:BODY:TRUNK LID. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2033745-1A2016-03-16. Service bulletin. STRUCTURE:BODY:TRUNK LID; STRUCTURE:BODY; ELECTRICAL SYSTEM. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2033717-1A2016-03-16. Service bulletin. STRUCTURE:BODY; STRUCTURE:BODY:DOOR; STRUCTURE:BODY:TRUNK LID. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2029216-22016-03-16. Service bulletin. STRUCTURE:BODY; VISIBILITY:GLASS, SIDE/REAR; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS; ELECTRICAL SYSTEM. SUMMARY TO BE PROVIDED ON A FUTURE DATE.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.