Service bulletins for the 2017 Bentley Bentayga
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
660 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Body and frame are shown. Show all
| 2054210.4 | 2023-01-06. Service bulletin. VISIBILITY; STRUCTURE; VISIBILITY:SUN/MOON ROOF ASSEMBLY. Noises from Panoramic Sun Roof Customer Statement: -Noises from the panoramic sun roof when driving. The noises occur mainly when the sun roof is closed |
|---|---|
| 2055540.3 | 2022-12-08. Service bulletin. STEERING; STRUCTURE. Rumble noise and/or floor pan/steering column vibration Customer Statement: -Floor pan or steering column/steering wheel vibration when maneuvering/steering at slow speeds with steering wheel input |
| 2065197.2 | 2022-12-08. Service bulletin. STRUCTURE; SUSPENSION. Squeaking/creaking noises from the front axle and/or leaks at the lower ball joint/s Customer Statement: -A leak is visible at the boot of the lower ball joint (grease emerging) however the boot does not show any damage |
| 2061582.6 | 2022-11-08. Service bulletin. LATCHES/LOCKS/LINKAGES; STRUCTURE; ELECTRICAL SYSTEM. Driver/Passenger door/s creak on close - Bentayga Customer Statement: -Driver and/or Passenger door creak during the "Power close" function |
| 2065567/1 | 2022-01-07. Service bulletin. STRUCTURE. Front wing Flying B detached, loose and/or rattling noise from the front wing(s). Customer statement / workshop findings The front wing Flying B is loose/rattling Or The front wing Flying B is detached from the front wing. Measure In the event the front wing Flying B brightware is loose/rattling carry out the onward instructions from step 1 However In the event the front wing Flying B brightware is detached (not damaged) carry out the instructions from step 2 HINT: The front wing does not require removal to conduct this procedure 1) Referring to Rep.Gr 66 - Remove the front wing 'Flying B' 2) Using a suitable cleaning agent for example 3M surface cleaner and suitable cloth, thoroughly clean the brightware aperture and the front wing 'Flying B' 3) Using the adhesive as per the Parts information section - Apply the adhesive in the three locations shown in Figure 3 |
| 2051045/4 | 2022-01-06. Service bulletin. EQUIPMENT; STRUCTURE. Night vision camera - Washer jet leaking. Customer statement / workshop findings: Washer fluid dripping/leaking from the night vision camera washer jet. Technical background: Please note: The photographs shown within this TPI are based on a New Continental GT/C vehicle however the process is similar regardless of vehicle type Referring to Figure 1 - In the event the afore mentioned symptom is evident the operative should refer to the Measure section of this TPI to replace the night vision washer jet (short link hose -Circled) which connects the night vision camera washer jet (A) to the washer jet supply hose connector (B) |
| 2064779/1 | 2021-11-05. Service bulletin. SUSPENSION; STRUCTURE. Customer statement: Creaking/squeak noise from the front suspension. Workshop findings: Defective upper inner lever bush. Technical background Verify that the customer complaint matches the sound file within the Bentley Hub Reference TPI Transaction number 2064779/-. The noise present in the sound file is caused by defective upper inner lever bush/bushes, the noise can appear in the following possible scenario. -When the vehicle is moved with steering input over uneven surfaces (for e.g. a ramp or speed bump). If the customer complaint occurs in any of the above circumstances and the noise can be clearly assigned to the noise within the sound file Refer to the instructions within the Measure section of this TPI. VERY IMPORTANT NOTE FOR HYBRID VEHICLES: -Hybrid vehicles use a High voltage system and MUST only be worked on by suitably qualified personnel. -Please ensure all guidelines within the repair manual are strictly followed before and whilst conducting any work on vehicles with a High voltage system |
| 2064469/1 | 2021-10-07. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM. Bentayga - Rear Window Blinds Do Not Fully Retract. Customer statement / workshop findings: Rear window blind/s do not fully retract (Jammed) |
| 2053351/7 | 2021-10-06. Service bulletin. ENGINE AND ENGINE COOLING; STRUCTURE. Buzzing noise from engine area. Customer statement / workshop findings Workshop findings: Buzzing noise heard at idle from the sump area when the vehicle is elevated on a workshop ramp. The noise cannot be heard from inside the cabin or outside of the vehicle in normal circumstances. Technical background: A buzzing noise can be generated by the oil pump when the engine is running at idle. Measure: Test a comparable vehicle with the same Engine derivative. If the same noise is apparent on the comparable vehicle and no oil pressure warnings or relevant DTCs are stored then the noise can be considered a characteristic of the vehicle and no further action should be taken. |
| 2057841/3 | 2021-10-06. Service bulletin. VISIBILITY; STRUCTURE. Windscreen replacement criteria whilst under manufacturers warranty Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged NOTE: The instructions MUST be followed to help the retailer clarify if the windscreen should be replaced under manufacturers warranty (Stress crack) or Customer pay/insurance (external influence damage) |
| 2056582/4 | 2021-10-06. Service bulletin. STRUCTURE. Interior trim - Creak and rattle - Noise identification Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work |
| 2052394/13 | 2021-08-06. Service bulletin. LATCHES/LOCKS/LINKAGES; STRUCTURE. Customer statement / workshop findings Driver or Passenger door creak during the Close function Technical background: Refer to the vehicle repair history to check and confirm any previous work done regarding door latch replacement noting the following: - Only replace the door latch which is exhibiting the symptom |
| 2052394/12 | 2021-08-06. Service bulletin. STRUCTURE; LATCHES/LOCKS/LINKAGES. Driver/Passenger door latch creak on close. Customer statement / workshop findings Driver or Passenger door creak during the Close function Technical background: Refer to the vehicle repair history to check and confirm any previous work done regarding door latch replacement noting the following: - Only replace the door latch which is exhibiting the symptom |
| 2063240/1 | 2021-06-04. Service bulletin. STRUCTURE. Creaking noise from the rear seats (5 and 7 seat variants only). Customer statement / workshop findings: Noise/Creak from the rear seat/s at speeds up to 70 mph And/or Creaking from rear seat/s between 0-20 mph during gentle acceleration and braking Technical background: This TPI applies to all 5 and 7 seat variants This TPI does not apply to 4 seat variants Noises and creaks originating from the rear seat/s as a result of seat location pegs and mega bracket interference while driving at speeds up to 70 mph and gentle acceleration and braking between 0-20 mph should be resolved by following the instructions within the Measure section. |
| 2060458/2 | 2021-04-08. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE; EQUIPMENT. Water ingress onto the front reading light. Customer statement / workshop findings: Water drips from the front interior light. The water drips directly from the electric drive of the front sun roof motor. Technical background: A water drop can get onto the guide rail instead of the water flow area of the guide rail. The water runs forwards to the guide tube of the operating cable and from there onto the electric drive. |
| 2044536/9 | 2021-04-07. Service bulletin. EQUIPMENT; STRUCTURE; ELECTRICAL SYSTEM. Bentayga deployable sill step malfunction. Customer statement / workshop findings: Deployable sill step accessory malfunctions. Technical background: This TPI is specifically written to record key information, reach a logical diagnosis and ultimately a problem resolution when presented with a deployable sill step malfunction. Please report via DISS all findings during your investigation and rectification process. |
| 2062622/1 | 2021-04-07. Service bulletin. EQUIPMENT; STRUCTURE. Water leak/wind noise diagnosis. Customer statement / workshop findings: Water leak/wind noise evident Technical background: The instructions within the Measure section should be followed to assist in the diagnosis of water leaks or wind noise |
| 2062338/1 | 2021-03-04. Service bulletin. STRUCTURE; EQUIPMENT. Bentayga front door trim - Alignment pin. Customer statement / workshop findings: The alignment pin used to locate the front door trim panel is broken (Figure 1). Measure: The front alignment pin is required to aid alignment of the door trim panel to the door panel during the Manufacturing process NOTE: In Service the alignment pin is not required NOTE: Replacement parts are not needed and are not available to order Referring to Figure 1 – Remove and discard the following: - Broken alignment pin x1 ( If evident) - Fixings x3 - Alignment pin plate x1 TIP: Cover the area in which the plate was previously fixed using anti creak tape If the condition is as shown in Figure 2 - The removal of the alignment pin/plate and fixings is not required unless broken. |
| 2052394/11 | 2021-01-08. Service bulletin. ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES; STRUCTURE:BODY:DOOR. Driver/Passenger door power latch creak on close. Customer statement / workshop findings: Driver or Passenger door creak during the power latch Close function Technical background: Refer to the Measure section of this TPI Measure: Ensure the fault is as described within the Customer statement, refer to the video on the Bentley Hub referencing TPI 2052394/- |
| 2054210/3 | 2020-08-07. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS; EQUIPMENT:MECHANICAL; EQUIPMENT. Noises from Panoramic sun roof. Customer statement / workshop findings: Noises from the Panoramic sun roof when driving. The noises occur mainly when the sun roof is closed. Technical background: Mechanical system of sun roof frame not or insufficiently lubricated. |
| 2054084/2 | 2020-08-06. Service bulletin. STRUCTURE. Bullseye air outlets - chrome finisher detached. Customer statement / workshop findings: Air vent chrome finisher has detached from vane. Technical background: It is possible that using aftermarket clip on devices such as mobile phone holders, air freshener holders or chewing gum dispensers may result in the chrome air vent finisher becoming detached from the vane. Measure: Please advise the Customer that the use of aftermarket clip on devices is not recommended and continued use may result in repeat failures. Damage caused by the use of aftermarket clip on devices will not be covered under vehicle warranty. |
| 2057841/2 | 2020-08-05. Service bulletin. STRUCTURE. Windscreen replacement criteria whilst under manufacturers warranty. Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged |
| 2056582/3 | 2020-08-05. Service bulletin. STRUCTURE. Interior trim - Creak and rattle - Noise identification. Customer statement / workshop findings: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work |
| 2056582/2 | 2020-01-09. Service bulletin. STRUCTURE. Condition: Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work Technical Background It is the retailers responsibility to check and confirm if there are any TPIs which are applicable to the customers complaint/issue if there is an applicable TPI available, apply it and complete a DISS complaint to include Workshop findings only (No repair query required). For correct diagnosis and repair the attached Flowchart must be followed in conjunction with the Measure section of this TPI |
| 2054643.1 | 2019-07-01. Service bulletin. STRUCTURE; SUSPENSION. Air suspension warning - Air hoses chaffing on rear subframe - Leaking |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.