WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Audi S6

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

777 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
TSB_2082617_12026-08-05. Service bulletin. POWER TRAIN. This bulletin provides information when there are noises in the overrun ( e.g. whirring, howling) - vehicles with 0BC.
TSB_2028902_52026-07-07. Service bulletin. POWER TRAIN. This bulletin provides informaiton when the transmission warning message appears in the cluster; P074100 stored in the TCM.
TSB_2074808_42026-06-04. Service bulletin. POWER TRAIN. The high-voltage batteries in electric vehicles are subject to various ageing effects which could lead to the energy content (energy density) being reduced. This reduction in the energy content, which is due to factors. Revised header. Added Model years
TSB_2074808_32026-01-07. Service bulletin. POWER TRAIN. This bulletin provides additoinal information to assist in determining the energy content of lithium-ion high-voltage batteries.
TSB_2028085_72025-04-04. Service bulletin. POWER TRAIN. This bulletin provides information when there are leaks from the transmission.
A3724292076084_12025-01-07. Service bulletin. POWER TRAIN. This TSB provides information when event memory entries cannot be deleted (Mode$0A error) on gearboxes: DL501, DL382/DL382E and DQ500.
A3724222074826_12024-09-06. Service bulletin. POWER TRAIN. This bulletin offers information about the basic information needed for technical requests for gaerbox complaints.
A3724222074826_12024-09-06. Service bulletin. POWER TRAIN. This bulletin offers information about the basic information needed for technical requests for gaerbox complaints.
A3724142074751_12024-08-06. Service bulletin. POWER TRAIN. This bulletin provides information about replacing the clutch end cover.
A3724132074750_12024-08-06. Service bulletin. POWER TRAIN. This bulletin provides information about replacing the clutch end cover.
A2424612074810_12024-08-06. Service bulletin. POWER TRAIN. This bulletin provides information when there is a fault shown; Engine: start/stop system, and the start system is not working; mileage below 50 km/32 miles.
371430200365862022-11-21. Service bulletin. POWER TRAIN. Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
371452203926712022-11-21. Service bulletin. POWER TRAIN. Bump after coming to a stop or rattle noise from transmission at idle speed
37 13 07 20336582022-05-31. Service bulletin. POWER TRAIN. Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
35 14 17 20322112022-05-31. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:GEARS. Gearbox warning light
37 14 30 20036582022-05-02. Service bulletin. ELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE:SOFTWARE; POWER TRAIN. This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off).
37 13 09 20287152022-05-02. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:GEARS. After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.
35 14 17 20322112022-05-02. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT. Incorrect driving mode sensor module. The driver information system displays the message ?Gearbox malfunction: you can continue driving?.
A351833 2028085-2018-10-15. Service bulletin. EQUIPMENT; POWER TRAIN. This bulletin contains instructions for diagnosing transmission leaks and repairing them.
A371882 2051685-2018-09-17. Service bulletin. EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). This bulletin contains repair instructions for when DTC P179E00 is stored and the mechantronic unit and/or gear sensor G676 are being replaced.
A301519 2019850-2018-02-05. Service bulletin. EQUIPMENT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; POWER TRAIN. Supersedes Technical Service Bulletin Group 30 number 11-10 dated December 2, 2011. Clutch is not operating properly. Clutch has a burnt smell. Clutch pedal does not fully return to starting position. Incorrect shifting, the revolutions of clutch plate and engine input shaft differ too much, excessive slipping of the clutch, and when the clutch is pressed and an incorrect lower gear is selected, can result in clutch damage.
A301722 2019850-2018-02-05. Service bulletin. POWER TRAIN:CLUTCH ASSEMBLY. This technical service bulletin provides guidelines for diagnosing the clutch plate.
A371309 2028715-2017-12-05. Service bulletin. POWER TRAIN. Supersedes Technical Service Bulletin Group 37 number 12-40 dated February 28, 2012. Rough gear changes, both when accelerating and when slowing down. There is a rough driving power disruption that occurs sporadically and lasts for less than a second. After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.
A661330 2030471-2017-11-17. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER. Supersedes Technical Service Bulletin Group 66 number 12-24 dated August 24, 2012. Customer may report the license plate attachment screws do not install properly. The license plate brackets are designed to be used with the appropriate length screw installed by hand with a screwdriver. Damaged warranty parts have been returned to Audi of America with evidence of excessive torque used when installing the screw and/or excessive screw length.
A371430 2003658-2017-11-08. Service bulletin. POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE). Supersedes Technical Service Bulletin Group 37 number 13-07 dated May 29, 2013. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off). No DTCs are stored. This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.