WenmarOpen by Wenmar Pro

Service bulletins for the 2010 Audi S4

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

681 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
001466203794912023-01-03. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated.
001463203357622023-01-03. Service bulletin. ENGINE AND ENGINE COOLING. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
001459202973722023-01-03. Service bulletin. ENGINE AND ENGINE COOLING. When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
001349203357612023-01-03. Service bulletin. ENGINE AND ENGINE COOLING. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
011366203145832022-10-31. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV). Under extreme driving conditions, such as a driving profile of mainly short distance (stop and go) driving high crankcase pressure can lead to the above described DTC codes.
011349203545422022-10-31. Service bulletin. ENGINE AND ENGINE COOLING. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction. The ODIS tester can identify the state of the restriction, and will request that the system is cleaned in order to prevent the MIL from illuminating.
011348203300152022-10-31. Service bulletin. ENGINE AND ENGINE COOLING. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction.
011345203145842022-10-31. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV). Under extreme driving conditions (such short-distance, stop-and-go driving), high crankcase pressure can cause the DTCs to appear.
011337203300142022-10-31. Service bulletin. ENGINE AND ENGINE COOLING. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction.
011335203545412022-10-31. Service bulletin. ENGINE AND ENGINE COOLING. During reset of the service reminder, the following message appears on the ODIS tester: ?Secondary air injection system - checking secondary air mass?. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction. The ODIS tester can identify the state of the restriction, and will request that the system is cleaned in order to prevent the MIL from illuminating.
011366203145832022-09-26. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV); ELECTRICAL SYSTEM. Under extreme driving conditions, such as a driving profile of mainly short distance (stop and go) driving high crankcase pressure can lead to the above described DTC codes.
011349203545422022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction. The ODIS tester can identify the state of the restriction, and will request that the system is cleaned in order to prevent the MIL from illuminating.
011348203300152022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction.
011345203145842022-09-26. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV). Under extreme driving conditions (such short-distance, stop-and-go driving), high crankcase pressure can cause the DTCs to appear.
011337203300142022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction.
011335203545412022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. During reset of the service reminder, the following message appears on the ODIS tester: ?Secondary air injection system - checking secondary air mass?. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction. The ODIS tester can identify the state of the restriction, and will request that the system is cleaned in order to prevent the MIL from illuminating.
011258203145812022-09-26. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV). Under extreme driving conditions, such as a driving profile of mainly short distance (stop and go) driving high crankcase pressure can lead to the above described DTC codes. By changing the crankcase pressure valve to a lower operating pressure this condition can be improved and eliminate the mentioned possible DTC codes. Along with the crankcase pressure being lowered, a new ECM software level is required to compensate for new crankcase pressure.
001463203357622022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
001459202973722022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
001349203357612022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
1337203019792022-08-01. Service bulletin. ENGINE AND ENGINE COOLING. Customer complains of excessive oil consumption.
13352010043132022-08-01. Service bulletin. ENGINE AND ENGINE COOLING. Engine oils that meet Audi Oil Quality Standards.
1453203901812022-08-01. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE. A small amount of dry or crusted coolant is seen on the coolant pump housing (Figure 1, Figure 2, and Figure 3). The coolant level warning is not on. A minor coolant leak is possible during the break-in phase of the coolant seal on the coolant pump. The dry coolant marks are normal.
1345203443922022-08-01. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY. When vehicles are driven on gravel roads, there is a greater chance of front-end stone impact damage to the intercooler radiator (Figure 1).
1343203443912022-08-01. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY. When vehicles are driven on gravel roads, there is a greater chance of front-end stone impact damage to the intercooler radiator (Figure 1).

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.