Service bulletins for the 2013 Audi Q7
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
1239 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| A301519 2019850- | 2018-02-05. Service bulletin. EQUIPMENT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; POWER TRAIN. Supersedes Technical Service Bulletin Group 30 number 11-10 dated December 2, 2011. Clutch is not operating properly. Clutch has a burnt smell. Clutch pedal does not fully return to starting position. Incorrect shifting, the revolutions of clutch plate and engine input shaft differ too much, excessive slipping of the clutch, and when the clutch is pressed and an incorrect lower gear is selected, can result in clutch damage. |
|---|---|
| A0115292041097-1 | 2018-02-05. Service bulletin. ENGINE; ELECTRICAL SYSTEM. The MIL is on. Customer may report that the engine runs irregularly. DTCs are stored in the ECM. On the camshaft adjustment valve, the filter element can loosen. There is no consequential damage from loosened particles in the oil circuit. They are gathered by the oil filter. |
| A9615002027416-6 | 2018-02-05. Service bulletin. EQUIPMENT. Supersedes Technical Service Bulletin Group 96 number 14-85 dated July 24, 2014. The sunglass holder in the dome light assembly will not latch closed or is stuck closed. The condition may be intermittent. The sunglass holder spring latch mechanism may have been damaged during the assembly procedure. |
| A911512 2036575- | 2018-02-05. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). Supersedes Technical Service Bulletin Group 91 number 15-80 dated March 20, 2015. The addresses and contacts stored in the Navigation >> Favorites, Navigation >> Directory, and Navigation >> Last destinations submenus disappear intermittently. Intermittently, the MMI system does not appear to remember that the user?s myAudi PIN has already been entered, and it requires the user to enter the PIN again. The voice recognition system does not easily recognize commands spoken by the driver. This condition can be consistent or intermittent. If a user stores addresses and contacts in the Navigation >> Favorites, Navigation >> Directory, and Navigation >> Last destinations submenus while a Bluetooth phone is paired to the vehicle, those addresses and contacts will only be visible any time that the same phone is paired to the vehicle. Any time that the same phone is not paired to the vehicle, the addresses and contacts will not be available. If a user stores addresses and contacts in the Navigation >> Favorites, Navigation >> Directory, and Navigation >> Last destinations submenus while a Bluetooth phone is not paired to the vehicle, the addresses and contacts will be available any time. In vehicles with Audi connect, the user is prompted to enter the myAudi PIN when selecting online destinations, accessing weather or other online information, or when importing contacts from the myAudi account. If the user?s Bluetooth phone (the same phone that was paired to the vehicle when the PIN was entered initially) is paired to the vehicle, the user will not be prompted to re-enter the PIN after it has been entered. 2016 A6 and A7 vehicles have a known software issue that requires the myAudi PIN to be entered with each ignition cycle. Multiple voice recognition training sessions can be stored in the MMI for different users when different phones are Bluetooth-paired during each training session. If no phone is paired, the training session will be stored under a default profile. Thi |
| A871567 2041717- | 2018-02-05. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Customer may report poor performance of A/C system or that the A/C system is inoperative. Any replacement of A/C compressors must include an ODIS GFF test plan confirming a malfunction of the A/C system with documentation of the recovered refrigerant volume. |
| A011538 2041566- | 2018-02-05. Service bulletin. ELECTRICAL SYSTEM. DTC P103200 (NOx sensor signal too high) is stored in the engine control module (ECM). Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts. |
| A1915612025303-5 | 2018-02-05. Service bulletin. ENGINE AND ENGINE COOLING. Supersedes Technical Service Bulletin Group 19 number 14-50 dated June 20, 2014. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service. |
| PDI - 2013 Audi | 2018-02-05. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This document contains the Audi delivery guidelines checklist. This document is in Spanish. |
| A011715 2047785- | 2018-02-05. Service bulletin. ENGINE. This is an informational bulletin requesting that dealers with the V6 TDI engine call TAC for instructions when they receive one of six DTCS in conjunction with DFCC symptom codes between 19184 and 19189. |
| A0115312033806-7 | 2018-02-05. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Supersedes Technical Service Bulletin Group 80 number 14-07 dated August 11, 2014. The MIL is on. Climate system heating performance is insufficient. Coolant level warning is on. Engine temperature is elevated. ?Limp Home? mode is active. Faults may be stored in the transmission control module. Coolant loss is found from one or more control valves: N82, N509, or N488. Coolant may have migrated into the wiring harness through the connector and into various control units. Climate system heating performance is insufficient due to coolant loss as a result of coolant migration in the electrical harness, faults in 08-Heating and Air Conditioning Electronics that result from coolant migration in the electrical harness, or a faulty N82 control valve. |
| A011713 2033001- | 2018-02-05. Service bulletin. EQUIPMENT. This bulletin provides instructions on how to clean the secondary air ports if they have too much carbon and cause a restriction. |
| A171782 2010043- | 2018-02-05. Service bulletin. ENGINE. This informational bulletin contains all the the Audi Oil Quality Standards that should be used when doing an oil change. |
| A301722 2019850- | 2018-02-05. Service bulletin. POWER TRAIN:CLUTCH ASSEMBLY. This technical service bulletin provides guidelines for diagnosing the clutch plate. |
| A441764 2022563- | 2018-02-05. Service bulletin. SUSPENSION:FRONT. This bulletin provides information regarding vibrations or movement that are felt in the wheel. |
| A431725 2033587- | 2018-02-05. Service bulletin. SUSPENSION. This bulletin provides instructions on how to resolve an issue with self-leveling suspension in cold temperatures. |
| A911724 2036575- | 2018-02-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. This informational bulletin provides an explanation for the customer regarding known software issues with the MIB & MMI3G+ bluetooth security profile. |
| A461486 2022584- | 2018-02-05. Service bulletin. SUSPENSION; AIR BAGS; SERVICE BRAKES, HYDRAULIC. Brake-related vibration and pulsation has several causes that depend on driving style and resulting brake disc temperature, as well as environmental conditions. Both the intensity of the wear of the brake system and the type of wear depend on the operating conditions of the vehicle. The wear of the brake discs is determined by the frequency and intensity of the brake operations. Dirt build-up, exposure to sand, long standing times, and road salt or similar, can also promote wear as well as cause scoring marks on the brake discs. The driving style of the driver also influences the wear of the brake system. An overly-aggressive driving style, which results in frequent sharp braking, can lead to more wear (particularly of the brake pads). A gentle driving style can result in very light brake applications. If the brakes are always applied with little pressure, a rust film and other airborne particles may settle on the brake discs and pads. Firm brake operations can help clean off such build-up from the brakes. |
| Bosch Class Acti | 2018-02-05. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; FUEL SYSTEM, DIESEL. Bosch Class Action Communication - Audi |
| ATE-17-05 | 2018-02-05. Service bulletin. EQUIPMENT. Due to increasing requests for high voltage personal protective equipment (HVE PPE) for dealer technicians working with high voltage vehicles (Hybrid, Plugin Hybrid, Electric Vehicle), the Volkswagen Tools and Equipment Team has identified two US based suppliers to support dealers in USA and Canada. |
| A231740 2036668- | 2018-02-05. Service bulletin. EQUIPMENT:RECREATIONAL VEHICLE/TRAILER:LPG SYSTEMS:TANK VALVE/GAUGE. This informational bulletin contains diagnosis instructions for the N290 fuel metering valve. |
| A571738 2017082- | 2018-02-05. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin contains instructions for sychronizing the remote key after the battery has been disconnected or replaced. |
| A191779 2036852- | 2018-02-05. Service bulletin. ENGINE. This informational bulletin provides a clarification on a normal operation for the cooling fans. |
| A921613 2038151- | 2018-02-05. Service bulletin. EQUIPMENT. This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct. |
| A921612 2038151- | 2018-02-05. Service bulletin. EQUIPMENT. This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct. |
| A911682 2045580- | 2018-02-05. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides information regarding a data connection message dur to the SIM card for T - Mobile subscribers. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.