C1115 on the 2013 Audi Q5
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
This code is specific to a manufacturer and is not described here. Its meaning is in the manufacturer's service information.
| 96137720350472 | 2022-11-21. Service bulletin. Lane Change Assistant "Sensors Blocked" warning in DIS (DTC C1114F3 and C1115F5) |
|---|---|
| 96137920350473 | 2022-11-21. Service bulletin. Lane Change Assistant "Sensors Blocked" warning in DIS (DTC C1114F3 and C1115F5) |
| A961351 2031095- | 2017-11-17. Service bulletin. Supersedes Technical Service Bulletin Group 96 number 13-49 dated February 1, 2013. Audi Side Assist deactivates itself immediately after the engine starts. DTC C1115F2 (Lane change assistance control module 2 Function limitation due to insufficient voltage) is logged in the lane change assistance control module, J769 (3C). The lane change assistance control module, J769 (3C), checks voltage after each engine on cycle. During this check, the voltage can be incorrectly reported which causes the DTC to set. |
| A961593 2031095- | 2017-10-21. Service bulletin. Supersedes Technical Service Bulletin Group 96 number 13-51 dated February 15, 2013. Audi side assist deactivates immediately after the engine is started. DTC C1115F2 (Lane change assistance control module 2 Function limitation due to insufficient voltage) is logged in the lane change assistance control module. The software of the lane change assistance control module, J769 (3C), has been optimized to remove this condition. |
4 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.