Service bulletins for the 2013 Audi A7
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
1450 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Driver assistance are shown. Show all
| A9119622038927_3 | 2019-07-09. Service bulletin. FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA. This bulletin contains repair instructions for when the overhead view camera system is not working and has various DTCs logged. |
|---|---|
| A871885 2044717_ | 2018-04-16. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; BACK OVER PREVENTION. This bulletin provides instructions on correcting a high-pitched buzzing noise in the cabin when the fan speed is no higher than 2. |
| A8717842044717-6 | 2018-04-16. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; BACK OVER PREVENTION. This bulletin provides instructions on correcting a high-pitched buzzing noise in the cabin when the fan speed is no higher than 2. |
| A901775 2030193- | 2018-02-05. Service bulletin. EQUIPMENT:ELECTRICAL; BACK OVER PREVENTION: CAMERA SYSTEM. This informational bulletin contains details about a normal function of the top view camera system. |
| A911736 2024323- | 2018-02-05. Service bulletin. FORWARD COLLISION AVOIDANCE: DYNAMIC BRAKE SUPPORT/BRAKE ASSIST. This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning. |
| A911732 2033355- | 2018-02-05. Service bulletin. FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. This informational bulletin contains information on why ACC sensor could be deactivated. |
| A911470 2038927- | 2017-12-05. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. The overhead view camera system or one of its cameras does not work. DTCs are logged in the rearview camera system control module. DTCs for the affected camera may also be logged. Incorrect component. |
| A961369 2034516- | 2017-12-05. Service bulletin. EQUIPMENT:ELECTRICAL; LANE DEPARTURE: ASSIST. Road lane markings are not detected or the Audi lane assist system is inoperative after the lane assist camera control module, J852, has been calibrated, the windshield has been replaced, or the air suspension level sensors have been adapted. A DTC for incorrect calibration may be stored in the camera control module (address word 85). The camera control module has not been properly calibrated; there is no technical problem. |
| A911374 2024323- | 2017-11-17. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. Supersedes Technical Service Bulletin Group 91 number 12-61 dated October 1, 2012. Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions. |
| A911378 2033355- | 2017-11-17. Service bulletin. FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. Adaptive Cruise Control (ACC) does not work. The message "ACC and braking guard: unavailable at this time. No sensor vision" appears in the instrument cluster. DTC is logged in the distance regulation control module, J428 (address word 13). |
| A911516 2038927- | 2017-11-17. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. Supersedes Technical Service Bulletin Group 91 number 14-70 dated November 6, 2014. The overhead view camera system or one of its cameras does not work. DTCs are logged in the rearview camera system control module. DTCS for the affected camera may also be logged. Incorrect component. |
| Dealer Letter - | 2017-11-08. Service bulletin. PARKING BRAKE; LANE DEPARTURE. This communication is to inform you of Update 97Y7. This Update is being proactively released to adjust the vehicle departure deactivation and the electromechanical parking brake functionality. Update the adaptation of the Comfort System Central Control Module, J393. |
| A461226 2031135- | 2017-11-08. Service bulletin. LANE DEPARTURE; PARKING BRAKE; ELECTRICAL SYSTEM. The customer may state the yellow warning for electric parking brake (EPB) appeared once in the instrument cluster, but the warning turned OFF after cycling the ignition and there have been no additional occurrences. The customer may state the adaptive cruise control (ACC) was inoperative once, but resumed operating properly after cycling the ignition and there have been no additional occurrences. DTC is stored in the EPB module. Internal code Param_InterFaultID 24 or 25 may be in the extended environmental conditions. The concern is due to a software glitch in the EPB control module. Concerns related to this software glitch can only occur once. Replacing the EPB module may cause an additional occurrence. |
| A911451 2033355- | 2017-11-08. Service bulletin. FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. Supersedes Technical Service Bulletin Group 91 number 13-78 dated March 15, 2013. Adaptive Cruise Control (ACC) does not work. The message "ACC and braking guard: unavailable at this time. No sensor vision" appears in the instrument cluster. DTC C110BF0 (Adaptive cruise control sensor restricted view) is logged in the distance regulation control module, J428 (address word 13). |
| A961483 2034000- | 2017-11-08. Service bulletin. LANE DEPARTURE: ASSIST; ELECTRICAL SYSTEM:SOFTWARE. Supersedes Technical Service Bulletin Group 96 number 13-78 dated October 31, 2013. Audi side assist deactivates or is sporadically inoperative. Message "Side Assist Unavailable" is displayed in the driver information system display when the system deactivates. Audi side assist deactivates or is sporadically inoperative. DTCs are stored in the Lane change assistance control module. A software issue within J769 causes a diagnostic fault, which deactivates the Audi side assist temporarily. |
| A911423 2036191- | 2017-11-08. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. One of the TopView cameras will not calibrate. For issues with the Front TopView camera image being upside down after replacing J928, please reference TSB 2035912, 91 Front TopView camera cannot be calibrated; picture appears upside down. Improper setup of the calibration board and/or camera. |
| A911422 2035912- | 2017-11-08. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM; ELECTRICAL SYSTEM. Supersedes Technical Service Bulletin Group 91 number 13-16 dated November 27, 2013. After the camera control module, J928, has been replaced, the front image is upside down and cannot be changed. The calibration cannot be completed. The coding of the camera control module is not completed correctly. |
| A961378 2034000- | 2017-11-03. Service bulletin. LANE DEPARTURE; LANE DEPARTURE: ASSIST. Supersedes Technical Service Bulletin Group 96 number 13-74 dated September 11, 2013. Customer complains that Audi Lane Change Assistant deactivates or is sporadically inoperative. Message ?Side Assist Unavailable? is displayed in the Driver Information Display when the system deactivates. Workshop finds that Audi Lane Change Assistant can be activated without issue. DTCs are stored in the Lane Change Assistance control module. A software issue within J769 causes a diagnostic fault, which deactivates the Audi Lane Change Assistant temporarily. |
| A911316 2035912- | 2017-10-31. Service bulletin. EQUIPMENT:ELECTRICAL; BACK OVER PREVENTION: CAMERA SYSTEM. After the camera control module, J928, has been replaced, the front image is upside down and cannot be changed (Figure 1). The calibration cannot be completed. The coding of the camera control module is not completed correctly. |
| A901555 2030193- | 2017-10-27. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. Supersedes Technical Service Bulletin Group 90 number 12-31 dated July 16, 2012. Customer states all or part of the picture generated from the top view camera system has an unnatural hue. To achieve a natural-looking top view camera image, the camera system constantly adjusts the displayed colors based on environmental conditions. In certain lighting conditions, the system responds to vibrant nearby colors (from the vehicle or other objects) by automatically adding a complementary color to rebalance toward white, which can lead to color deviations. For example, a red object can cause the system to add a green hue. The strength of the added color depends on the brightness of the object and the ambient light. |
| A911582 2029903- | 2017-10-21. Service bulletin. EQUIPMENT:ELECTRICAL; BACK OVER PREVENTION: CAMERA SYSTEM. Supersedes Technical Service Bulletin Group 91 number 12-42 dated June 20, 2012. The customer complains about the picture quality of rearview backup camera image in the MMI screen. The picture is fuzzy or distorted. The picture looks too bright, too dark, or opaque in certain areas of the image. The colors of the objects in the image are incorrect or slightly off. The guidelines used for parking are fuzzy, distorted, or pixelated when compared with the guidelines displayed on another vehicle?s MMI. |
| A961613 2034000- | 2017-09-27. Service bulletin. LANE DEPARTURE: ASSIST; LANE DEPARTURE. This bulletin provides a software update for lane change assistance faults stored in the control module. |
| A91167620359123 | 2017-03-15. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL. THIS BULLETIN PROVIDES TROUBLESHOOTING FOR AN INCORRECTLY CODED TOP VIEW / CORNER VIEW CAMERA SYSTEM. |
| A96160620295632 | 2017-03-07. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. THIS TECHNICAL SERVICE BULLETIN EXPLAINS POSSIBLE CAUSES FOR THE REARVIEW CAMERA TO NOT DISPLAY AN IMAGE. |
| A96160720295633 | 2017-02-23. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. THIS TECHNICAL SERVICE BULLETIN EXPLAINS POSSIBLE CAUSES FOR THE REARVIEW CAMERA TO NOT DISPLAY AN IMAGE. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.