Service bulletins for the 2020 Alfa Romeo Stelvio
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
165 on file from NHTSA, as of 2026-10-19.
About B1007 on the 2020 Alfa Romeo Stelvio: what the code means, and the bulletins and recalls about the same components.
By type
By component
By trouble code
By topic
Only bulletins with trouble code: B1007 are shown. Show all
| 9004199 | 2020-06-22. Service bulletin. EQUIPMENT; LANE DEPARTURE; ELECTRICAL SYSTEM. MODULE, Lane Departure Warning (Forward facing camera/half module) For vehicles w/ Driver Assistance features, prior to replacing the HALF module (forward-facing camera module) refer to STAR ONLINE S2008000001: During PDI inspection you may find the FCW Limited Functionality message displayed in the EVIC. Upon scanning the vehicle for DTC?s you may find: 1) B1006-49 HALF ECU - Internal electronic failure C141C-86 Video camera private CAN communication failure - Signal invalid C1999-86 Dataset failure - Signal invalid If you are unable to clear the combined three DTC's and the EVIC displays, "FCW LIMITED AVAIL", Perform a ?Restore Proxy Configuration? under Guided Diagnostics in the left hand column of WiTech 2. After performing this procedure, the DTC?s should go to ?Stored? and can then be cleared. The FFCM was flashed in transit on these vehicles and the Restore Proxy Config procedure was never performed. The Restore Proxy Configuration is needed to complete the flash process. 2) B1007-54 Camera - Missing Calibration If you are unable to calibrate the HALF Module, via the procedure in the service manual, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. |
|---|
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.