Service bulletin 0240009
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 629500 |
| Published by NHTSA | 2002-04-02 |
| Manufacturer's number | 0240009 |
| Manufacturer's date | 2002-02-01 |
| Replaces | 9940014 |
| NHTSA component | POWER TRAIN:AUTOMATIC TRANSMISSION |
NHTSA's summary
AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODE P1723. *SLC
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Transmission and driveline, Automatic transmission
Trouble codes named
P1723
| HYUNDAI SONATA | 2003 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 5NP-S9D9P-10 | 2016-10-18. Service bulletin. THIS BULLETIN PROVIDES INFORMATION ON COMPONENTS, ATTRIBUTES, AND PRECAUTIONS OF THE 7-SPEED DRY-TYPE DUAL CLUTCH TRANSMISSION (DCT). |
|---|---|
| 5NP-B6E2P-10 | 2016-10-14. Service bulletin. "THE PCM OR TCM CONTAINS LOGIC TO ADJUST SOLENOID DUTY AND LINE PRESSURE AS NEEDED TO COMPENSATE FOR NORMAL CLUTCH WEAR OVER THE LIFE OF THE TRANSAXLE. THIS BULLETIN PROVIDES THE PROCEDURES NECESSARY TO RESET (ERASE) AND RELEARN THE PCM/TCM ADAPTIVE VALUES. AFTER THE FOLLOWING REPAIRS HAVE BEEN COMPLETED, THE PCM/TCM ADAPTIVE VALUES MUST BE RESET IN ORDER TO PROVIDE OPTIMUM SHIFT QUALITY. IF THE PROCEDURE IS NOT PERFORMED, THE TRANSMISSION MAY EXPERIENCE A SHIFT FLARE OR HARSH SHIFT. H REPLACE AUTOMATIC TRANSAXLE OR PCM/TCM H REPROGRAM OR EXCHANGE A PCM/TCM FROM ANOTHER VEHICLE" |
| TSB-09-AT-018 | 2010-06-11. Service bulletin. HYUNDAI: ATA SOLENOID DIAGNOSTIC TROUBLE CODES P0740, P0741, P0742, P0743, P0746, P0748, P0750, P0755, P0760, P0765, P0770. INCORRECT OPERATION OF THE TRANSAXLE SOLENOIDS MAY RESULT IN THE FOLLOWING SYMPTOMS-CHECK ENGINE LIGHT ILLUMINATED; TRANSAXLE HELD IN 3RD GEAR FAIL SAFE. *PE |
| TSB-09-AT-013 | 2009-12-30. Service bulletin. HYUNDAI: AUTOMATIC TRANSAXLE RANGE SWITCH DIAGNOSTIC TROUBLE CODES P0705 (RANGE SWITCH SIGNAL PROBLEMS), P0707 (RANGE SWITCH OPEN CIRCUIT), AND P0708 (RANGE SWITCH SHORT CIRCUIT OR MULTIPLE INPUTS). AN IMPROPERLY ADJUSTED OR IMPROPERLY OPERATING RANGE SWITCH MAY RESULT IN THE ABOVE MENTIONED CONDITIONS. MALFUNCTION INDICATOR LIGHT (MIL) ILLUMINATED; IMPOSSIBLE ENGINE START IN P OR N. *PE |
| 0540008 | 2005-08-16. Service bulletin. AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODES LIST. *SC |
| 0440006 | 2004-05-11. Service bulletin. TRANSMISSION CONTROL MODULE (TCM) REPROGRAMMING INSTRUCTIONS. *TT 2-3 SHIFT FLARE IMPROVEMENT. |
| 133 | 2003-10-10. Service bulletin. THIRD GEAR FAIL-SAFE INFORMATION. *TT |
| 0340014 | 2003-10-07. Service bulletin. AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODE (DTC) P1723 ACCOMPANIED WITH MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATED; TRANSAXLE HELD IN 2RD GEAR FAIL-SAFE; HARSH SHIFTS INTO REVERSE OR DRIVE. *TT |