WenmarOpen by Wenmar Pro

Service bulletin 112748

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11033955
Published by NHTSA2026-06-18
Manufacturer's number112748
Manufacturer's date2026-06-11
NHTSA componentPOWER TRAIN

NHTSA's summary

SHIFTER - TRANSMISSION

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Transmission and driveline

Vehicles listed
RAM 15002025, 2026

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
S26210000042026-10-07. Service bulletin. The Customer May Complain About a Popping Noise, Grinding Noise, or an Intermittent No Reverse or Forward Transmission Engagement. The Tech May Find Damaged and/or Worn Transmission Output Shaft Splines (850RE Transmission Only)
AOD COMBO2026-10-07. Service campaign. Customer Satisfaction Notification A0D – Electronic Shift Module - Dealer Notification The Electronic Shift Module (ESM) software on about 20,000 of the above vehicles may cause the rotary electronic shifter to become unresponsive. This condition may cause a "Service Shifter" message to appear on the instrument panel cluster and prevent the vehicle from starting.
18-075-26 REV. A2026-10-07. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0111-00 - Intake Air Temperature Sensor 1 Circuit Performance (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance ● P0E7E-00 - Coolant Bypass Valve B Control Circuit (In Active or Stored status) ● P2AF6-00 - Starter Relay 3 Stuck Off (with PCR). ● P00FD - Battery B State Of Charge Performance. ● P013F-00 - O2 Sensor 2/1 Delayed Response - Lean To Rich Bank. (In Active or Stored status) ● P014A-00 - O2 Sensor 2/2 Delayed Response - Rich to Lean Bank. (In Active or Stored status) ● P013E-00 - O2 Sensor 2/1 Delayed Response - Rich to Lean Bank. (In Active or Stored status) ● P014B-00 - O2 Sensor 2/2 Delayed Response - Lean To Rich Bank. (In Active or Stored status) ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off.(In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. (In Active or Stored status) ● P1CEA-00 - Boost Side EVAP Purge System Performance. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. (In Active or Stored status) ● U0673-00 - Lost Communication With Ion Sense Module. (In Active or Stored status) Customers may also comment on one or more of the following: ● High Elevation misfire. Electronic Start Stop (ESS) inoperative or "Auto Stop/Start Not Ready" message displayed in the Instrument Panel Cluster (IPC). NOTE: **Normal Auto Stop/Start inhibit conditions should not be considered the cause of this concern. The condition is associated with DTC P2AF6.** ● "Door Ajar" message on when door is closed. ● BSCM MIL illumination request not setting the MIL in the PCM High oil level indicator illuminated on the IPC. **The following software enhancements are now available: ● Improvements to prevent misfire DTCs P0300-P0306 that may set if one of the following DTCs set: ○ P0335-00 - Crankshaft Position Sensor Circuit. ○ P0336-00 - Crankshaft Position Sensor Performance.** This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
18-071-26 REV. A2026-10-07. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P2237-00 - O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1. ● P2240-00 - O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1. ● P2251-00 - O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1. ● P2254-00 - O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 1. ● P2243-00 - O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1. ● P2247-00 - O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1. ● P015B-00 - O2 Sensor Delayed Response - Lean To Rich Bank 1 Sensor 1. ● P015D-00 - O2 Sensor Delayed Response - Lean To Rich Bank 2 Sensor 1. ● P0E7C-00 - Coolant Bypass Valve "B" Control Circuit Low. ● P0E7D-00 - Coolant Bypass Valve "B" Control Circuit High. ● P0E7E-00 - Coolant Bypass Valve "B" Control Circuit Range/Performance. ● P0E7F-00 - Coolant Bypass Valve "B" Control Circuit Stuck/Open. ● U063C-00 - Lost Communication With Coolant Bypass Valve Actuator "B". ● P0100-00 - Mass Or Volume Air Flow Sensor "A" Circuit. ● P0101-00 - Mass Or Volume Air Flow Sensor "A" Circuit Range/Performance. ● P0461-00 - Fuel Level Sensor "A" Circuit Range/performance. ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. ● P062B-00 - Internal Control Module Fuel Injector Control Performance. ● B1810-00 - Driver Door Shorted Low. ● B25C7-00 - Redundant Driver Door Shorted Low.** ● U0104-00 - Lost Communication With Cruise Control Module (NA Market Only) (In Active or Stored status). ● U0405-00 - Invalid Data Received From Cruise Control Module (NA Market Only) (In Active or Stored status). NOTE: Vehicles setting DTCs U0405-00 and U0104-00 may experience an inability to be cleared.
21-062-262026-09-30. Service bulletin. Transmission Rattle Customers may comment on the following: SYMPTOM: ● Rattle noise coming from the transmission. This bulletin involves inspecting and possibly tightening the transmission oil heater mounting nuts to proper specification.
S2418000012 REV.C2026-09-08. Service bulletin. Mil On/Check Engine Lamp (CEL) On, Engine Runs Rough
18-077-262026-08-26. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● P0300 - Multiple Cylinder Misfire. Customers may experience one of the following: ● Vehicle runs rough on initial cold start only after an overnight or extended soak. **This bulletin involves reprogramming the PCM with the latest available software.**
08-308-262026-08-13. Service bulletin. Flash: Electronic Shift Module (ESM) Updates Customers may comment on one or more of the following: SYMPTOM: ● Shifter is unresponsive. ● Unable to start the vehicle. ● “Service Shifter” message displayed in the Instrument Panel Cluster (IPC). This bulletin involves inspecting and possibly reprogramming the ESM with the latest available software.
18-075-262026-07-29. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Performance (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance ● P0E7E-00 - Coolant Bypass Valve B Control Circuit (In Active or Stored status)** ● P2AF6-00 - Starter Relay 3 Stuck Off (with PCR). ● P00FD - Battery B State Of Charge Performance. ● P013F-00 - O2 Sensor 2/1 Delayed Response - Lean To Rich Bank. (In Active or Stored status) ● P014A-00 - O2 Sensor 2/2 Delayed Response - Rich to Lean Bank. (In Active or Stored status) ● P013E-00 - O2 Sensor 2/1 Delayed Response - Rich to Lean Bank. (In Active or Stored status) ● P014B-00 - O2 Sensor 2/2 Delayed Response - Lean To Rich Bank. (In Active or Stored status) ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off.(In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. (In Active or Stored status) ● P1CEA-00 - Boost Side EVAP Purge System Performance. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. (In Active or Storedstatus) ● U0673-00 - Lost Communication With Ion Sense Module.(In Active or Stored status) Customers may also comment on one or more of the following: ● **High Elevation misfire. ● Electronic Start Stop (ESS) inoperative. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
18-071-262026-07-29. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **U0104-00 - Lost Communication With Cruise Control Module (NA Market Only) (In Active or Stored status). ● U0405-00 - Invalid Data Received From Cruise Control Module (NA Market Only) (In Active or Stored status). NOTE: Vehicles setting DTCs U0405-00 and U0104-00 may experience an inability to be cleared.** ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. ● P0071-00 - Ambient Air Temperature Sensor Performance. ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. ● P1CEA-00 - Boost Side EVAP Purge System Performance. ● P05BD-00 - Stop-start Mode Switch Range/Performance. ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. ● U0673-00 - Lost Communication With Ion Sense Module. ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking - in ACTIVE or STORED status. ● P0325-00 - Knock/Combustion Vibration Sensor 1 Circuit - in ACTIVE or STORED status. ● P0330-00 - Knock/Combustion Vibration Sensor 2 Circuit - in ACTIVE or STORED status. ● P032A-00 - Knock-Combustion Vibration Sensor C Circuit - in ACTIVE or STORED status. ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/Performance - in ACTIVE or STORED status. ● P2AF6-00 - Starter Relay 3 Stuck Off - in ACTIVE or STORED status. ● P0300-00 - Multiple Cylinder Misfire - in ACTIVE or STORED status set during cold start catalyst heating. ● P0301-00 - Cylinder 1 Misfire - in ACTIVE or STORED status set during cold start catalyst heating. ● P0302-00 - Cylinder 2 Misfire - in ACTIVE or STORED status set during cold start catalyst heating. ● P0303-00 - Cylinder 3 Misfire - in ACTIVE or STORED status set during cold start catalyst heating. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.