WenmarOpen by Wenmar Pro

Service bulletin 18-075-26

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11035325
Published by NHTSA2026-07-29
Manufacturer's number18-075-26
Manufacturer's date2026-07-24
NHTSA componentPOWER TRAIN; ENGINE

NHTSA's summary

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Performance (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance ● P0E7E-00 - Coolant Bypass Valve B Control Circuit (In Active or Stored status)** ● P2AF6-00 - Starter Relay 3 Stuck Off (with PCR). ● P00FD - Battery B State Of Charge Performance. ● P013F-00 - O2 Sensor 2/1 Delayed Response - Lean To Rich Bank. (In Active or Stored status) ● P014A-00 - O2 Sensor 2/2 Delayed Response - Rich to Lean Bank. (In Active or Stored status) ● P013E-00 - O2 Sensor 2/1 Delayed Response - Rich to Lean Bank. (In Active or Stored status) ● P014B-00 - O2 Sensor 2/2 Delayed Response - Lean To Rich Bank. (In Active or Stored status) ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off.(In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. (In Active or Stored status) ● P1CEA-00 - Boost Side EVAP Purge System Performance. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. (In Active or Storedstatus) ● U0673-00 - Lost Communication With Ion Sense Module.(In Active or Stored status) Customers may also comment on one or more of the following: ● **High Elevation misfire. ● Electronic Start Stop (ESS) inoperative. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Engine, Transmission and driveline

Trouble codes named

P0071, P0073, P00C6, P00FD, P0111, P013E, P013F, P014A, P014B, P05BD, P062B, P06DD, P0E7E, P1CEA, P2AF6, P2C90, U0673

Vehicles listed
RAM 15002026

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
S2609000006 REV.A2026-10-07. Service bulletin. Customer indicates Malfunction Indicator Light (MIL) or Check Engine Light (CEL) coming on.
S26210000042026-10-07. Service bulletin. The Customer May Complain About a Popping Noise, Grinding Noise, or an Intermittent No Reverse or Forward Transmission Engagement. The Tech May Find Damaged and/or Worn Transmission Output Shaft Splines (850RE Transmission Only)
AOD COMBO2026-10-07. Service campaign. Customer Satisfaction Notification A0D – Electronic Shift Module - Dealer Notification The Electronic Shift Module (ESM) software on about 20,000 of the above vehicles may cause the rotary electronic shifter to become unresponsive. This condition may cause a "Service Shifter" message to appear on the instrument panel cluster and prevent the vehicle from starting.
18-075-26 REV. A2026-10-07. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0111-00 - Intake Air Temperature Sensor 1 Circuit Performance (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance ● P0E7E-00 - Coolant Bypass Valve B Control Circuit (In Active or Stored status) ● P2AF6-00 - Starter Relay 3 Stuck Off (with PCR). ● P00FD - Battery B State Of Charge Performance. ● P013F-00 - O2 Sensor 2/1 Delayed Response - Lean To Rich Bank. (In Active or Stored status) ● P014A-00 - O2 Sensor 2/2 Delayed Response - Rich to Lean Bank. (In Active or Stored status) ● P013E-00 - O2 Sensor 2/1 Delayed Response - Rich to Lean Bank. (In Active or Stored status) ● P014B-00 - O2 Sensor 2/2 Delayed Response - Lean To Rich Bank. (In Active or Stored status) ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off.(In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. (In Active or Stored status) ● P1CEA-00 - Boost Side EVAP Purge System Performance. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. (In Active or Stored status) ● U0673-00 - Lost Communication With Ion Sense Module. (In Active or Stored status) Customers may also comment on one or more of the following: ● High Elevation misfire. Electronic Start Stop (ESS) inoperative or "Auto Stop/Start Not Ready" message displayed in the Instrument Panel Cluster (IPC). NOTE: **Normal Auto Stop/Start inhibit conditions should not be considered the cause of this concern. The condition is associated with DTC P2AF6.** ● "Door Ajar" message on when door is closed. ● BSCM MIL illumination request not setting the MIL in the PCM High oil level indicator illuminated on the IPC. **The following software enhancements are now available: ● Improvements to prevent misfire DTCs P0300-P0306 that may set if one of the following DTCs set: ○ P0335-00 - Crankshaft Position Sensor Circuit. ○ P0336-00 - Crankshaft Position Sensor Performance.** This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
21-062-262026-09-30. Service bulletin. Transmission Rattle Customers may comment on the following: SYMPTOM: ● Rattle noise coming from the transmission. This bulletin involves inspecting and possibly tightening the transmission oil heater mounting nuts to proper specification.
91008982026-09-17. Service bulletin. Engine PNs: MY 24-26 WD/DT (5.7L) Code P00B is being misdiagnosed and incorrect parts are being installed causing over repair. Refer to SOL S2609000006 The IAFM Foam Engine Valley Cover (PN 53013735AB) does not provide sufficient clearance for proper routing of the MDS solenoid jumper harness (PN 05148163AE). As a result, the harness may become compressed by the foam cover. To prevent unnecessary part replacement, the MDS solenoid jumper harness (PN 05148163AE) should be inspected for damage or pinch conditions prior to replacing the following part numbers: Engine PNs: 68409343AA 68409357AA 68450915AA OCV PNs: 53022338AB Phaser PNs: 53022298AA 53022298AB
S2418000012 REV.C2026-09-08. Service bulletin. Mil On/Check Engine Lamp (CEL) On, Engine Runs Rough
08-308-262026-08-13. Service bulletin. Flash: Electronic Shift Module (ESM) Updates Customers may comment on one or more of the following: SYMPTOM: ● Shifter is unresponsive. ● Unable to start the vehicle. ● “Service Shifter” message displayed in the Instrument Panel Cluster (IPC). This bulletin involves inspecting and possibly reprogramming the ESM with the latest available software.
9100861 Rev 32026-08-06. Service bulletin. PUMP, Auxiliary Coolant Before replacing the Auxiliary Coolant Pump, please perform the following steps: 1) Key ON/OFF and let the after-run pump run for at least 20 minutes before moving on to step #2. 2) Inspect the pump connector area for presence of water. 3) Inspect the pump connector for corrosion. 4) Inspect the pump for coolant contamination as this can cause the pump to stall. 5) Inspect battery terminals for damage to rule out a battery drainage issue. 6) Ensure the PCM is up-to-date with the latest available flash. If correct repair is not performed then the claim or condition will be recovered by Warranty Operations.
9100861 Rev 12026-07-23. Service bulletin. PUMP, Auxiliary Coolant Before replacing the Auxiliary Coolant Pump, please perform the following steps: 1) Key ON/OFF and let the after-run pump run for at least 20 minutes before moving on to step #2. 2) Inspect the pump connector area for presence of water. 3) Inspect the pump connector for corrosion. 4) Inspect the pump for coolant contamination as this can cause the pump to stall. 5) Inspect battery terminals for damage to rule out a battery drainage issue. 6) Ensure the PCM is up-to-date with the latest available flash.