WenmarOpen by Wenmar Pro

Over-the-air update ECG-26.2.11.4 Expedition

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeOver-the-air update
NHTSA id11032709
Published by NHTSA2026-05-15
Manufacturer's numberECG-26.2.11.4 Expedition
Manufacturer's date2026-05-06
Campaign id or software versionECG-26.2.11.4
NHTSA componentELECTRICAL SYSTEM; UNKNOWN OR OTHER

NHTSA's summary

Quality improvements include: - Enhanced system performance, disk usage limits and memory monitoring

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system

Vehicles listed
FORD EXPEDITION2022, 2023, 2024

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
26V1040002026-02-20. EXTERIOR LIGHTING:TAIL LIGHTS; ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL
25V1320002025-02-28. ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL
22V1930002022-03-25. ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
TSB 26-23662026-08-19. Service bulletin. Some vehicles listed in the Model statement above may exhibit a condition where certain devices built on the Android OS platform (including Voxx rear seat entertainment system) indicate they are connected to the vehicles Wi-Fi hotspot, but internet performance is degraded. Symptoms may include no internet access, intermittent connectivity, and/or limited/very low streaming capability. Some websites/apps may partially load while others do not load at all, despite showing Connected. This may be due to the telematics control unit (TCU) software.
26E042026-08-03. Emissions. NEW VEHICLE DELIVERY HOLD - Emissions Recall 26E04 Certain 2021-2025 Model Year F-150, Maverick, Mustang, Ranger, Expedition, Bronco Sport, Explorer, Bronco, Navigator, and Aviator Vehicles Powertrain Control Module Software Update
SSM 550312026-07-28. Service bulletin. Some 2021-2026 Ford/Lincoln vehicles may exhibit various symptoms including but not limited to the auto start/stop system not operating as intended with a "Check Charging System" message in the instrument panel cluster (IPC) while the charging system is operating properly with no charging related diagnostic trouble codes (DTC) stored. This may be due to someone using an aftermarket programmer to change the body control module (BCM) configuration to disable the auto start/stop system or perform other unsupported programming modifications. To correct this condition on F-150 and Bronco vehicles, download and run the Ford Diagnosis and Repair System (FDRS) application titled "BCM-Charging System Configuration Correction". Running this application will determine if the BCM configuration was modified by the customer and if so, provide the option to return the configuration back to factory settings. For other vehicle models exhibiting concerns related to unsupported aftermarket BCM programming, submit a Technical Support Request (TSR) requesting support to revert the BCM configuration
SSM 550282026-07-28. Service bulletin. Some 2021-2024 Ford and Lincoln vehicles may exhibit an "Updating SYNC" message on the vehicle center display screen after an over the air (OTA) update. The message can be cleared from the center display screen and SYNC can be used normally, but it will re-appear at every subsequent ignition cycle. Inform customers that engineering is currently working on a software update solution for this condition to be delivered OTA expected in late Q3 2026. Software will update automatically if vehicle connectivity is enabled in the vehicles settings. Monitor Professional Technician System (PTS) for additional information.
PCM-26.20.4 Exped&Nav2026-07-28. Over-the-air update. 25S75 Recall remedy -Powertrain Control Module update to introduce logic to prevent low pressure fuel pump binding and maintain fuel flow to the engine.
TSB 26-22972026-06-29. Service bulletin. Some of the vehicles listed in the model statement above equipped with SYNC4 may experience a blank center display screen or black center display after welcome animation. The rear-view camera will still function when shifting the vehicle to reverse under these conditions.
ITRM-26.B04 Expedition2026-06-13. Over-the-air update. 26C10 Recall remedy -Addresses instances where the trailer lights and trailer brakes may not function
SSM 549062026-06-10. Service bulletin. Some 2022-2023 Expedition vehicles equipped with a 15-inch multi-function display (minor feature code HJGAY) may exhibit an incorrectly sized image displayed on the 360-degree camera after updating the imaging processing module A (IPMA) software and/or replacing the IPMA module. To correct this condition, download and run the "IPMA - Processing Module A (IPMA) 360 View Camera Configuration" application using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. If the incorrectly sized image displayed on the 360-degree camera is still present, continue with normal diagnostics and repair as necessary outside of this article. Refer to the Workshop Manual, Section 413-13B > Parking Aid - Vehicles With: Parking Aid Camera > Diagnosis and Testing. For claiming, use causal part 14G647 and labor operations 12651D and 12651D4. <br /><br /> To confirm if a vehicle is built with minor feature code HJGAY, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS).
SSM 549052026-06-10. Service bulletin. Some 2022-2024 Expedition equipped with driver's assistance package (minor feature codes DBCBB or DBCBC) may exhibit various driver assistance feature warning messages displayed in the instrument panel cluster (IPC) with various invalid data/lost communication diagnostic trouble codes (DTC) stored in the power steering control module (PSCM) and/or anti-lock brake (ABS) module. To correct this condition, download and run the "IPMA - Image Processing Module A (IMPA) Software Update" application using the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 14G647 and labor operation MT14G647SSM up to 1.0 hours. <br /><br /> If the IPMA is failing to communicate, download and run the "IPMA - Image Processing Module A (IPMA) Recovery" application in the FDRS scan tool. Select and run the IPMA Recovery Flash Erase option from the menu. Once communication has been restored with the IPMA, download and run the "IPMA - Image Processing Module (IPMA) Alignment" application in the FDRS and download and run the "IPMA - Image Processing Module A (IPMA) Software
TCU-26.2.11.3 Expedition2026-06-04. Over-the-air update. Quality improvements include: - Telematics Control Unit update to enhance connected features